pdp11_irq.vhd

-- $Id: pdp11_irq.vhd 1181 2019-07-08 17:00:50Z mueller $
-- SPDX-License-Identifier: GPL-3.0-or-later
-- Copyright 2007-2019 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
--
------------------------------------------------------------------------------
-- Module Name:    pdp11_irq - syn
-- Description:    pdp11: interrupt requester
--
-- Dependencies:   ib_sel
-- Test bench:     tb/tb_pdp11_core (implicit)
-- Target Devices: generic
-- Tool versions:  ise 8.2-14.7; viv 2014.4-2017.2; ghdl 0.18-0.35
--
-- Revision History: 
-- Date         Rev Version  Comment
-- 2019-04-23  1136   1.3    BUGFIX: re-write, ensure ACK send to correct device
-- 2011-11-18   427   1.2.2  now numeric_std clean
-- 2010-10-23   335   1.2.1  use ib_sel
-- 2010-10-17   333   1.2    use ibus V2 interface
-- 2008-08-22   161   1.1.4  use iblib
-- 2008-04-25   138   1.1.3  use BRESET to clear pirq
-- 2008-01-06   111   1.1.2  rename signal EI_ACK->EI_ACKM (master ack)
-- 2008-01-05   110   1.1.1  rename IB_MREQ(ena->req) SRES(sel->ack, hold->busy)
-- 2007-12-30   107   1.1    use IB_MREQ/IB_SRES interface now
-- 2007-10-12    88   1.0.2  avoid ieee.std_logic_unsigned, use cast to unsigned
-- 2007-06-14    56   1.0.1  Use slvtypes.all
-- 2007-05-12    26   1.0    Initial version 
------------------------------------------------------------------------------

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

use work.slvtypes.all;
use work.iblib.all;
use work.pdp11.all;

-- ----------------------------------------------------------------------------

entity pdp11_irq is                     -- interrupt requester
  port (
    CLK : in slbit;                     -- clock
    BRESET : in slbit;                  -- bus reset
    INT_ACK : in slbit;                 -- interrupt acknowledge from CPU
    EI_PRI : in slv3;                   -- external interrupt priority
    EI_VECT : in slv9_2;                -- external interrupt vector
    EI_ACKM : out slbit;                -- external interrupt acknowledge
    PRI : out slv3;                     -- interrupt priority
    VECT : out slv9_2;                  -- interrupt vector
    IB_MREQ : in ib_mreq_type;          -- ibus request
    IB_SRES : out ib_sres_type          -- ibus response
  );
end pdp11_irq;

architecture syn of pdp11_irq is
  
  constant ibaddr_pirq : slv16 := slv(to_unsigned(8#177772#,16));
  constant vect_pirq   : slv9  := slv(to_unsigned(8#240#,9));

  subtype  pirq_ibf_pir    is integer range 15 downto 9;
  subtype  pirq_ibf_pia_h  is integer range  7 downto 5;
  subtype  pirq_ibf_pia_l  is integer range  3 downto 1;

  type regs_type is record              -- state registers
    pirq : slv8_1;                      -- pirq mask
    eilast : slbit;                     -- ei won in last cycle
  end record regs_type;

  constant regs_init : regs_type := (
    (others=>'0'),                      -- pirq
    '0'                                 -- eilast
  );

  signal R_REGS : regs_type := regs_init;
  signal N_REGS : regs_type := regs_init;
  
  signal IBSEL_PIRQ : slbit := '0';
  signal PI_PRI : slv3 := (others => '0');    -- prog.int. priority

--  attribute PRIORITY_EXTRACT : string;
--  attribute PRIORITY_EXTRACT of PI_PRI : signal is "force";
  
begin

  SEL : ib_sel
    generic map (
      IB_ADDR => ibaddr_pirq)
    port map (
      CLK     => CLK,
      IB_MREQ => IB_MREQ,
      SEL     => IBSEL_PIRQ
    );
  
  proc_regs: process (CLK)
  begin
    if rising_edge(CLK) then
      if BRESET = '1' then
        R_REGS <= regs_init;
      else
        R_REGS <= N_REGS;
      end if;
    end if;
  end process proc_regs;
  
  PI_PRI <= "111" when R_REGS.pirq(7)='1' else
            "110" when R_REGS.pirq(6)='1' else
            "101" when R_REGS.pirq(5)='1' else
            "100" when R_REGS.pirq(4)='1' else
            "011" when R_REGS.pirq(3)='1' else
            "010" when R_REGS.pirq(2)='1' else
            "001" when R_REGS.pirq(1)='1' else
            "000";
  
  proc_next : process (R_REGS, IB_MREQ, IBSEL_PIRQ, PI_PRI,
                       EI_PRI, EI_VECT, INT_ACK)
    variable r : regs_type := regs_init;
    variable n : regs_type := regs_init;
    variable idout : slv16 := (others=>'0');
    variable ibreq : slbit := '0';
  begin
    
    r := R_REGS;
    n := R_REGS;

    idout := (others=>'0');
    ibreq := IB_MREQ.re or IB_MREQ.we;
    
    -- ibus transactions
    if IBSEL_PIRQ = '1' then
      
      idout(pirq_ibf_pir)   := r.pirq;
      idout(pirq_ibf_pia_h) := PI_PRI;
      idout(pirq_ibf_pia_l) := PI_PRI;
      
      if IB_MREQ.we='1'and IB_MREQ.be1='1'  then
        n.pirq := IB_MREQ.din(pirq_ibf_pir);
      end if;
    end if;

    -- pirq vs ei_vect selection
    if unsigned(EI_PRI) > unsigned(PI_PRI) then
      n.eilast := '1';
      PRI      <= EI_PRI;
      VECT     <= EI_VECT;
    else
      n.eilast := '0';
      PRI      <= PI_PRI;
      VECT     <= vect_pirq(8 downto 2);
    end if;

    -- Note: INT_ACK comes one cycle after vector is latched !
    -- therefore send INT_ACK to EI_ACKM only if EI was winner in last cycle
    EI_ACKM <= '0';
    if r.eilast = '1' then
      EI_ACKM <= INT_ACK;
    end if;
    
    N_REGS <= n;

    IB_SRES.dout <= idout;
    IB_SRES.ack  <= IBSEL_PIRQ and ibreq;   -- ack all
    IB_SRES.busy <= '0';
    
  end process proc_next;

end syn;