Pulseeffects GUI not working #345
Comments
|
The error |
|
Forget it. It is optional so it should not be the problem |
|
Check if |
|
it shows installed The situation is that when I click the pulseeffects from the application launcher it notify me as Pulseeffects was Updated with option to reset the settings ( yes/No) but nothing happens , If i do run Few information ( if it helps ) Even after a complete removal of the pulseeffects package from my system I have installed it again but the situation is same removed :: few other files too manually after uninstalling the pulseeffects like $HOME/.config/pulse |
|
Try to reset PulseEffects from the command line |
|
I have done as said to reset PulseEffects with dconf reset........... but no change to the issue But one thing i noticed when i checked pulseeffects with my one more system ( same distribution installed )
The issue is even after removing the pulseeffects package and after reboot My system still shows PulseEffescts ( app ) & ( mic) as device suitable for all these categories While i have checked in my other system if i do uninstall the package this list never shows the PulseEffects as available device I think If somehow it can be removed from the system than the issue can be resolved |
|
@wwmm kinda weird experience but issue resolved .. when i connected my USB sound card just few moments ago and i clicked the PulseEffects from menu and suddenly it worked look at this What keeps PulseEffects from not loading it's GUI and showing those errors !!!!!
|
|
Strange. We may be having another problem with phonon/kde. It would not be the first time... |
|
Same behavior here. (pulseeffects 4.3.7) thor@thor ~ $ pulseeffects This is my system: |
|
What is printed in the terminal when you run PE in debug mode |
|
thor@thor ~ $ G_MESSAGES_DEBUG=pulseeffects pulseeffects Ready to test what you suggest. Just tell me ;) |
|
It seems PE is not being able to load its sinks in your system. Sometime ago a user had a similar problem but it is not clear what could cause this. Here PE never fails to load these sinks. Are you able to install PE using flatpak? Instructions here Package-Repositories. This way we could see if it is a problem with the package. |
|
first, i completely removed the pulseeffects installed via ppa; a link in the menu exists, selecting it no reaction at all. launching the command in shell you can see the result above. |
|
Flatpak packages are not executed this way. You have to do |
neve used it... (embarassed...) so, same problem occurs. Since Mint 19 is strictly derived from Ubuntu 18.04, if we try to solve this problem on Mint 19, there is 99% of chance that can be solved on Ubuntu 18.04.... Note: the locale prob is that i have the interface set to US but everything else (time, date etc.) in EU/Italian mode. But i think this is not a problem... |
|
Hummm... Did you try |
|
after the reset it works. great!
|
|
When resetting through dconf the popup will be shown. Only when resetting thought pulseeffects they are not shown. |
|
Understood. My sincere compliments to your work. As an audiophile (or close to that), I had been waiting for some time for some willing hero to take care of this aspect ;) |
|
I got this problem too in Solus 86_64 when I upgraded the packages. I don't feel like reseting any settings since I spent some creating an equalizer preset for my cheap headphones that made them sound really good. EDIT: The preset did not get removed by using the dconf command posted further up. |
|
I wonder if this problem occurs when I select to use Dark Theme in Pulseeffects because after I did it I had to run the dconf command again to get Pulseaudio to open. |
|
Is this problem with the dark theme reproducible? Here I can switch the dark mode on and off without problems. But I do not have the GTK warnings that you have. |
I think it does not depend on installation method, but depends on some other random factors, the phase of the moon for example. |
|
So I also have the same problem under both Ubuntu 18.04 and 18.10, also with both versions from the ppa and flathub. I tried the dconf-reset, but that wouldn't solve it either. The debug from the ppa version read:
|
|
It would be good to see the core dump of this crash. Run the command Once you have the PID of the core dump generated by PE run the command |
|
The output (called "Stack trace of thread 2" for some reason) reads |
|
Hummm... Unfortunately this output is of no help |
Is there any other information I could provide you with? |
|
We have to make this core dump useful. @mikhailnov is there a package with debug symbol on ubuntu? In case there isn't you would have to try to compile the source code @Blahpunkt |
|
Yes, but they are not in the repository. You have to download and install them by yourself. Bionic is Ubuntu 18.04, Cosmic is 18.10 |
|
I can't open pulseeffects in Kubuntu 18.04.1 too....
|
|
Thanks @mikhailnov for pointing out the right files. The coredump now reads:
|
|
This helps. Now I know where to look. The crash starts when the function |
|
Commended in #363 but this seems more like the issues I'm having. Installed with the debug symbols and get this output |
|
I made a few changes in PE |
|
Oh weird, I'll make a new issue for my thing then - unfortunately my C++ is a bit too rusty to help out :( |
|
Is this still a problem in |
|
I build 4.4.0 from source and it works! Thank you for all the work and looking into it so thoroughly! Also it might be good to know that flathub still seems to distribute v4.3.8 |
when ever i try to start PE gui it never opens . than i tried to start PE from terminal it shows . ( Pulseeffects installed using Ubuntu PPA , System details : kubuntu 18.04.1 LTS
I have no idea why this happening
The text was updated successfully, but these errors were encountered: