Skip to content

Latest commit

 

History

History
73 lines (48 loc) · 3.3 KB

CONTRIBUTING.md

File metadata and controls

73 lines (48 loc) · 3.3 KB
Raw

Contribute to DRAKVUF Sandbox

Setup development environment

Prerequisites

Very first thing to consider is to setup and configure your local instance of DRAKVUF Sandbox. There are two basic options in that matter:

  • Develop on local machine: Install Debian Buster in VMware Workstation 15 Player.
  • Develop on a remote server: Just get some bare-metal or rent a dedicated server (e.g. Kimsufi) with Debian Buster.

Caution! Your host machine must be an Intel processor with VT-x and EPT support, even when using VMware or other nested virtualization. You can check it by executing the following command on your native system (i.e. host system and without hypervisor loaded):

# should return non-empty output and exit code 0
lscpu | grep -i flags | grep -w ept

DRAKVUF will not run on incompatible processors, as it directly relies on particular hardware virtualization extensions.

Clone the repository

In order to obtain the source code of DRAKVUF Sandbox, you need to execute the following commands:

git clone --recurse-submodules https://github.com/CERT-Polska/drakvuf-sandbox.git
cd drakvuf-sandbox

Build Debian packages

On local computer

The DRAKVUF Sandbox distribution packages are built using Docker, in order to make them more reproducible. In order to build the packages by yourself, perform the following steps:

  1. Obtain and install Docker.
  2. Execute: 
    sh drakcore/package/build.sh
  3. The Debian packages will be produced to the out/ directory. You can install them similarly as you would install the released packages. See "Basic installation" section of README.md.

On the Drone CI server

When you open a pull request to this project, Drone CI will run some tests on your code and Debian packages will be also built during the process. The artifacts produced by the CI are available in S3 bucket at minio.drakvuf.cert.pl/debs.

Packages are numbered according to the Drone CI job numbers. You can figure out the job number by inspecting the status checks related to your commit and clicking on Details link near continuous-integration/drone/push label. The build ID is in the URL and also in the breadcrumb, e.g.: Repositories -> CERT-Polska/drakvuf-sandbox -> #200.

Install editable Python packages

Now you can re-install Python packages from sources, using:

/opt/venvs/drakcore/bin/pip3 install --editable ./drakcore/
/opt/venvs/drakrun/bin/pip3 install --editable ./drakrun/

your changes to the DRAKVUF Sandbox services will be immediately visible after you restart them.

Test local changes

  1. Open drakcore/drakcore/app.py
  2. Add these lines before def main(): 
    @app.route("/hello-world")
def hello_world():
    return 'hello'
  3. Save the file and execute systemctl restart drak-web
  4. Navigate to http://localhost:6300/hello-world, your new subpage should appear.