printer-seemecnc-rostock-max-v2-2015.cfg

# This file constains the pin mappings for the SeeMeCNC Rostock Max
# (version 2) delta printer from 2015. To use this config, the
# firmware should be compiled for the AVR atmega2560.

# See the example.cfg file for a description of available parameters.

[stepper_a]
step_pin: PC0
dir_pin: !PL1
enable_pin: !PA7
step_distance: .0125
endstop_pin: ^PA2
homing_speed: 50
position_endstop: 380
arm_length: 290.800

[stepper_b]
step_pin: PC1
dir_pin: PL0
enable_pin: !PA6
step_distance: .0125
endstop_pin: ^PA1

[stepper_c]
step_pin: PC2
dir_pin: !PL2
enable_pin: !PA5
step_distance: .0125
endstop_pin: ^PC7

[extruder]
step_pin: PC3
dir_pin: !PL6
enable_pin: !PA4
step_distance: .010793
nozzle_diameter: 0.500
filament_diameter: 1.750
heater_pin: PH6
sensor_type: ATC Semitec 104GT-2
sensor_pin: PF0
control: pid
pid_Kp: 20.9700
pid_Ki: 1.3400
pid_Kd: 80.5600
min_temp: 0
max_temp: 300

[heater_bed]
heater_pin: PE5
sensor_type: ATC Semitec 104GT-2
sensor_pin: PF2
control: pid
pid_Kp: 46.510
pid_Ki: 1.040
pid_Kd: 500.000
min_temp: 0
max_temp: 300

[fan]
pin: PH5

[heater_fan nozzle_cooling_fan]
pin: PH4
heater: extruder

[mcu]
serial: /dev/ttyACM0

[printer]
kinematics: delta
max_velocity: 300
max_accel: 3000
max_z_velocity: 150
delta_radius: 174.75

[ad5206 stepper_digipot]
enable_pin: PD7
scale: 2.08
channel_1: 1.34
channel_2: 1.0
channel_4: 1.1
channel_5: 1.1
channel_6: 1.1

[static_digital_output stepper_config]
pins:
    PG1, PG0,
    PK7, PG2,
    PK6, PK5,
    PK3, PK4,
    PK1, PK2

[static_digital_output yellow_led]
pins: !PB7