pir-sensor.yaml

esphome:
  name: pir-sensors
  friendly_name: pir
  name_add_mac_suffix: true
  project: 
    name: "Zenz.PIR"
    version: "1.0.0"

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
# You can generate your API key with following URL
# https://esphome.io/components/api.html?highlight=randomly%20generated
api:
  encryption:
    key: "your_api_key_here"

ota:
  - platform: esphome
    password: "ff51747c81ad167b81903a9281833815"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Pir Sensors Fallback Hotspot"
    password: "hotspont_password_here"

captive_portal:

# Configure GPIO4 as PULLDOWN without exposing it as a sensor
custom_component:
  - lambda: |-
      pinMode(4, INPUT_PULLDOWN);
      return {};

globals:
  - id: binary_sensor_on_count
    type: int
    restore_value: yes
    initial_value: '0'
  - id: last_activation_time
    type: int
    restore_value: no
    initial_value: '0'

binary_sensor:
  - platform: gpio
    pin: 1
    name: "PIR Sensor"
    device_class: motion
    icon: mdi:account
    publish_initial_state: true
    filters:
      - delayed_on: 500ms
      - delayed_off: 5s
    on_press:
      then:
        - lambda: |-
            id(last_activation_time) = millis() / 1000;
    on_release:
      then:
        - lambda: |-
            int duration = (millis() / 1000) - id(last_activation_time);
            if (duration >= 60) {
              id(binary_sensor_on_count) += 1;
            }

time:
  - platform: homeassistant
    id: homeassistant_time

sensor:
  - platform: template
    name: "Binary Sensor On Count"
    id: binary_sensor_on_count_sensor
    accuracy_decimals: 0
    update_interval: 60s
    lambda: |-
      return id(binary_sensor_on_count);

interval:
  - interval: 24h
    then:
      - lambda: |-
          id(binary_sensor_on_count) = 0;