No Setpoint Device for Danfoss Thermostat DRS21

[ftsikogi]

I am using zwave-js mqtt as a docker installation with Domoticz instead of Home Assistant. The problem that i am facing is irrelevant to Domoticz and it is relevant to how zwavejs intergrated with Danfoss Thermostat. It discovers 5 devices and it is missing the Setpoint Device. Please note that i am able to control the setpoint temperature through the zwavejs UI.
Please see the below links:

domoticz/domoticz#5432

home-assistant/core#46643

ZwaveJS: 10.3.0

Thanks for your help!

[robertsLando]

The problem like reported by kpine in this comment is that the device is not recognized as a climate. what you could do is to create a custom device config and add it to store/customDevices.js in a format like: https://github.com/zwave-js/zwave-js-ui/blob/master/hass/devices.ts

See docs

[pquinqu]

Hi, so i tried to create an entire customDevices.js file for this DRS21 device, using the docs and the file format in devices.ts. When Zwave-js-ui tries to load the file it shows :
zwave-js-ui | 2023-02-05 11:41:42.867 ERROR GATEWAY: Failed to load /usr/src/app/store/customDevices.js: Unexpected token ':' zwave-js-ui | /usr/src/app/store/customDevices.js:6 zwave-js-ui | '2-32784-3': [ zwave-js-ui | ^ zwave-js-ui | zwave-js-ui | SyntaxError: Unexpected token ':' zwave-js-ui | at Object.compileFunction (node:vm:360:18) ... zwave-js-ui | at loadCustomDevices (/usr/src/app/server/lib/Gateway.js:98:23) zwave-js-ui | at Object.<anonymous> (/usr/src/app/server/lib/Gateway.js:124:1) zwave-js-ui | 2023-02-05 11:41:43.762 INFO APP: Version: 8.8.3.649eb88 zwave-js-ui | 2023-02-05 11:41:43.767 INFO APP: Application path:/usr/src/app
Attached is the file.
customDevices.zip

The doc says : There, all components are stored that Z-Wave JS UI needs to create for each Z-Wave device type. The key is the Z-Wave device id(<manufacturerid>-<productid>-<producttype>). The value is an array with all Home Assistant components to be created for that Z-Wave device.

For me the file seems to be valid. What did I do wrong ?
Thanks for your help. Phil

[robertsLando]

Giving that's a js file you should use module.exports = ....

module.exports = {
	'2-32784-3': [
		{
			type: 'climate',
			object_id: 'thermostat',
			values: [
....

[pquinqu]

Hi, thank you for the help: it works and i finally created the attached customDevice.js file to fix the case from ftsikogi.
customDevices.zip
The file adds a climate entry for the Danfoss/Devolo DRS21 room thermostat. It works for my configuration (Z-Wave JS UI and Domoticz).

The doc says : "send us a PR!". I am afraid I don't know how to integrate that into the repo with a pull request. And in which file. I don't want to break anything.
So i guess an help would be great, if you have any time.
Thanks to you. Phil

[robertsLando]

@pquinqu I submitted a PR based on your attached file, thanks

de7ab08