-
email jeremy at copiousfreetime dot org
-
git clone git://github.com/copiousfreetime/tyrantmanager.git
sudo gem install tyrantmanager
tyrantmanager (setup|create-instance|start|stop|process-status|replication-status|stats|list) [options]+
A command line tool for managing Tokyo Tyrant instances. It allows for the creation, starting, stopping, listing, stating of many tokyo tyrant instances all on the same machine. The commands can be applied to a single or multiple instances.
After installing the gem, you need to setup a tyrant manager home, all the tyrant instances are initially relative to this location.
jeremy@playground:~ % tyrantmanager setup /tmp/tyrant 00:09:06 INFO : Creating directory /tmp/tyrant 00:09:06 INFO : Creating default config file /tmp/tyrant/config.rb 00:09:06 INFO : Creating directory /tmp/tyrant/instances 00:09:06 INFO : Creating directory /tmp/tyrant/log 00:09:06 INFO : Creating directory /tmp/tyrant/tmp
Once the manager home is setup, all other commands need to know about it. This can be achieved in 3 ways.
-
use the –home option on all commands
-
execute the commands when the current working directory is the tyrant home.
-
set the TYRANT_MANAGER_HOME environment variable
This is also the attempt order when looking for the manager home. The process is:
-
Check if –home is used, and that it is a valid tyrantmanager home. If that is the case then use it.
-
If –home is not used, then check if the current working directory has a valid ‘config.rb’ file that is also a top level manager config. If it is then use that as the tyrant manager home.
-
If all else fails, use the TYRANT_MAMAGER_HOME environment variable.
Each instances is separate, yet initially relative to to the tyrant manager’s home.
jeremy@playground:/tmp/tyrant % tyrantmanager create-instance foo 00:17:55 INFO : Creating instance directory /tmp/tyrant/instances/foo 00:17:55 INFO : Creating directory /tmp/tyrant/instances/foo 00:17:55 INFO : Creating default config file /tmp/tyrant/instances/foo/config.rb 00:17:55 INFO : Creating directory /tmp/tyrant/instances/foo/ulog 00:17:55 INFO : Creating directory /tmp/tyrant/instances/foo/data 00:17:55 INFO : Creating directory /tmp/tyrant/instances/foo/lua 00:17:55 INFO : Creating directory /tmp/tyrant/instances/foo/log
This creates a new tyrant instance in the instances directory. There are several subdirectories created for you automatically.
-
data - the actual data file location
-
ulog - where the update logs are kept
-
log - the server logs
-
lua - default location for lua code
Configuration of a Tyrant instances is in the ‘config.rb’ file in the instances home directory. This all the configuration items that are specific to that instance. Take a look through the file, or just execute it to see a nicely formatted output of all the current configuration parameters, descriptions, and current values. This example just highlights a few of the options.
jeremy@playground:/tmp/tyrant/instances/foo % ruby config.rb The directory holding the database file. By default this is relative to the instance directory. If you want to put it somewhere else, then put the full path here. - data_dir => "data" The hostname this instance will listen on. The default is all - host => "0.0.0.0" [...] Mode of the server in relation to the database. It can be a combination of the following: w - it is a database writer r - it is a database reader c - it creates the database if it does not exist t - it truncates the database if it does exist e - do not lock the database when doing operations f - use a non-blocking lock when doing operations - mode => "wc" The options for data stored in the database. They include one of the compression options: d - Deflate b - BZIP2 t - TCBS and l - allow the database to be larger than 2GB - opts => "ld" [...] The type of database this instance will be. Options are: memory-hash - an in memory hash database memory-tree - an in memory B+ tree database hash - an on disk hash database tree - an on disk B+ tree database fixed - an on disk fixed length database table - an on disk table database - type => "hash"
There are also configuration items in the ‘config.rb’ in the Manager’s home directory. These are global defaults for all instances the manager knows about, and may be overridden in the instance’s ‘config.rb’ file. Again, just execute the configuration file to see all the options, their current set values and the documentation.
jeremy@playground:/tmp/tyrant % ruby config.rb The top directory of the manager directory. This is set with the --directory option or it can be set here" - home => nil Default settings for tyrant instances. If a tyrant does not explicitly set one of these configurations then the default listed here is used. This does not list all of the configuration variables, only those that make sense to have defaults for. - instance_defaults [...] Run daemonized - instance_defaults.daemonize => true [...] The list of locations that contain Tyrant instances. Each element in this array either a directory containing instance directories, or an instance directory itself. Tyrant Manager will figure out what the case is. If this is unset, then the default 'instances' directory below the manager's home directory is used. - instances => nil The 'ttserver' command. This will use the first one found in path by default or you may explicitly set it here. - ttserver => "ttserver"
There are a considerable number of configuration options for Tokyo Tyrant and I’ve done my best to document all of them.
If you do have more than one instance on a single machine, you’ll need to make sure to change the port option, otherwise only one instance will run.
desc "The port this tyrant will listen on. The default is 1978" port 1978
Instances may be started and stopped all at once, or individually. On startup, the ttserver command line that was used is output.
jeremy@playground:/tmp/tyrant % tyrantmanager list bar : port 1979 : /tmp/tyrant/instances/bar baz : port 1980 : /tmp/tyrant/instances/baz foo : port 1978 : /tmp/tyrant/instances/foo
jeremy@playground:/tmp/tyrant % tyrantmanager start 00:51:15 INFO : Starting bar : ttserver -host 0.0.0.0 -port 1979 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/bar/bar.pid -log /tmp/tyrant/instances/bar/log/bar.log -le -ulog /tmp/tyrant/instances/bar/ulog -ulim 1g -rts /tmp/tyrant/instances/bar/bar.rts /tmp/tyrant/instances/bar/data/bar.tch#opts=ld#mode=wc 00:51:15 INFO : 00:51:15 INFO : Starting baz : ttserver -host 0.0.0.0 -port 1980 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/baz/baz.pid -log /tmp/tyrant/instances/baz/log/baz.log -le -ulog /tmp/tyrant/instances/baz/ulog -ulim 1g -rts /tmp/tyrant/instances/baz/baz.rts /tmp/tyrant/instances/baz/data/baz.tch#opts=ld#mode=wc 00:51:15 INFO : 00:51:15 INFO : Starting foo : ttserver -host 0.0.0.0 -port 1978 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/foo/foo.pid -log /tmp/tyrant/instances/foo/log/foo.log -le -ulog /tmp/tyrant/instances/foo/ulog -ulim 1g -rts /tmp/tyrant/instances/foo/foo.rts /tmp/tyrant/instances/foo/data/foo.tch#opts=ld#mode=wc 00:51:15 INFO :
As you can see the commandline used to start the tyrant server is output.
jeremy@playground:/tmp/tyrant % tyrantmanager process-status 00:52:17 INFO : bar is running as pid 28658 00:52:17 INFO : baz is running as pid 28670 00:52:17 INFO : foo is running as pid 28682
jeremy@playground:/tmp/tyrant % tyrantmanager stop all 00:52:40 INFO : Stopping bar : pid 28658 00:52:40 INFO : Sent signal TERM to 28658 00:52:40 INFO : Stopping baz : pid 28670 00:52:40 INFO : Sent signal TERM to 28670 00:52:40 INFO : Stopping foo : pid 28682 00:52:40 INFO : Sent signal TERM to 28682
And see that they are all done
jeremy@playground:/tmp/tyrant % tyrantmanager process-status 00:53:15 INFO : bar is not running, or its pid file is gone 00:53:15 INFO : baz is not running, or its pid file is gone 00:53:15 INFO : foo is not running, or its pid file is gone
jeremy@playground:/tmp/tyrant % tyrantmanager start foo,baz 00:53:54 INFO : Starting baz : ttserver -host 0.0.0.0 -port 1980 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/baz/baz.pid -log /tmp/tyrant/instances/baz/log/baz.log -le -ulog /tmp/tyrant/instances/baz/ulog -ulim 1g -rts /tmp/tyrant/instances/baz/baz.rts /tmp/tyrant/instances/baz/data/baz.tch#opts=ld#mode=wc 00:53:54 INFO : 00:53:54 INFO : Starting foo : ttserver -host 0.0.0.0 -port 1978 -thnum 8 -tout 15 -dmn -pid /tmp/tyrant/instances/foo/foo.pid -log /tmp/tyrant/instances/foo/log/foo.log -le -ulog /tmp/tyrant/instances/foo/ulog -ulim 1g -rts /tmp/tyrant/instances/foo/foo.rts /tmp/tyrant/instances/foo/data/foo.tch#opts=ld#mode=wc 00:53:54 INFO :
Foo and baz are started, bar is still stopped
jeremy@playground:/tmp/tyrant % tyrantmanager process-status 00:54:38 INFO : bar is not running, or its pid file is gone 00:54:38 INFO : baz is running as pid 28708 00:54:38 INFO : foo is running as pid 28720
jeremy@playground:/tmp/tyrant % tyrantmanager stop foo 00:55:33 INFO : Stopping foo : pid 28720 00:55:33 INFO : Sent signal TERM to 28720
And baz is still running
jeremy@playground:/tmp/tyrant % tyrantmanager process-status 00:55:51 INFO : bar is not running, or its pid file is gone 00:55:51 INFO : baz is running as pid 28708 00:55:51 INFO : foo is not running, or its pid file is gone
You can also look at the server statistics of each running instance
jeremy@playground:/tmp/tyrant % tyrantmanager stats Instance bar at /tmp/tyrant/instances/bar bigend.... 0 fd........ 7 libver.... 312 loadavg... 0.030000 memrss.... 1003520 memsize... 173633536 os........ Linux path...... /tmp/tyrant/instances/bar/data/bar.tch pid....... 28749 protver... 0.91 rnum...... 0 ru_real... 14.560829 ru_sys.... 0.000000 ru_user... 0.004000 sid....... 72615862 size...... 1052992 time...... 1249174632.207222 type...... hash version... 1.1.29 [...]
-
Inspired by the Light Cloud tyrant manager
Copyright © 2009-2011, Jeremy Hinegardner. All rights reserved
Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS” AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.