Skip to content

0xabad1dea/pyrtlsdr-peakfinder

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

1 Commit
 
 
 
 

Repository files navigation

pyrtlsdr-peakfinder

The quickest, dirtiest scanner imaginable to spit out frequencies on which signal peaks are detected for RTL-SDR radios. It is probably not very efficient, but it does work. For my hardware. Good luck.

Usage: peakfinder.py 88.0 110.0 (in megahertz)

The values in the script were empirically determined and you should feel free to adjust them. Reported frequencies may lean slightly right of the signal's center.

Copyright © 2013 Melissa Elliott (0xabad1dea) All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  • Neither the name of the software nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

Secret fourth clause: more Kasane Teto

image source

About

Scan for signal peaks with RTL-SDR

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages