4D NetKit

Overview

4D NetKit is a built-in 4D component that allows you to interact with third-party web services and their APIs, such as Microsoft Graph.

Table of contents

• OAuth2Provider class

  • New OAuth2 provider
  • OAuth2ProviderObject.getToken()

• Office365 class

  • New Office365 provider
  • Office365.mail.append()
  • Office365.mail.copy()
  • Office365.mail.createFolder()
  • Office365.mail.delete()
  • Office365.mail.deleteFolder()
  • Office365.mail.getFolder()
  • Office365.mail.getFolderList()
  • Office365.mail.getMail()
  • Office365.mail.getMails()
  • Office365.mail.move()
  • Office365.mail.renameFolder()
  • Office365.mail.reply()
  • Office365.mail.send()
  • Office365.mail.update()
  • Well-known folder names
  • "Microsoft" mail object properties
  • Status object (Office365 Class)
  • Office365.user.get()
  • Office365.user.getCurrent()
  • Office365.user.list()

• Google class

  • cs.NetKit.Google.new()
  • Google.mail.append()
  • Google.mail.createLabel()
  • Google.mail.delete()
  • Google.mail.deleteLabel()
  • Google.mail.getLabel()
  • Google.mail.getLabelList()
  • Google.mail.getMail()
  • Google.mail.getMailIds()
  • Google.mail.getMails()
  • Google.mail.send()
  • Google.mail.untrash()
  • Google.mail.update()
  • Google.mail.updateLabel()
  • Google.user.get()
  • Google.user.getCurrent()
  • Google.user.list()
  • labelInfo object
  • Status object (Google Class)

• Tutorial : Authenticate to the Microsoft Graph API in service mode

• (Archived) Tutorial : Authenticate to the Microsoft Graph API in signedIn mode (4D NetKit), then send an email (SMTP Transporter class)

• Copyrights

Warning: Shared objects are not supported by the 4D NetKit API.

OAuth2Provider

The OAuth2Provider class allows you to request authentication tokens to third-party web services providers in order to use their APIs in your application. This is done in two steps:

1. Using the New OAuth2 provider component method, you instantiate an object of the OAuth2Provider class that holds authentication information.
2. You call the OAuth2ProviderObject.getToken() class function to retrieve a token from the web service provider.

Here's a diagram of the authorization process:

This class can be instantiated in two ways:

• by calling the New OAuth2 provider method
• by calling the cs.NetKit.OAuth2Provider.new() function

Warning: OAuth2 authentication in signedIn mode requires a browser. Since some servers have restrictions regarding the supported browsers (for example, check this Google support page), the functionality may not work properly.

New OAuth2 provider

New OAuth2 provider( paramObj : Object ) : cs.NetKit.OAuth2Provider

Parameters

Parameter	Type		Description
paramObj	Object	->	Determines the properties of the object to be returned
Result	cs.NetKit.OAuth2Provider	<-	Object of the OAuth2Provider class

Description

New OAuth2 provider instantiates an object of the OAuth2Provider class.

In paramObj, pass an object that contains authentication information.

The available properties of paramObj are:

Parameter	Type	Description	Optional
name	text	Name of the provider. Available values: "Microsoft", "Google" or "" (if "" or undefined/null attribute, the authenticateURI and the tokenURI need to be filled by the 4D developer).	Yes
permission	text	- "signedIn": Azure AD/Google will sign in the user and ensure they gave their consent for the permissions your app requests (opens a web browser). - service": the app calls Microsoft Graph with its own identity/Google (access without a user).	No
clientId	text	The client ID assigned to the app by the registration portal.	No
redirectURI	text	(Not used in service mode) The redirect_uri of your app, the location where the authorization server sends the user once the app has been successfully authorized. When you call the .getToken() class function, a web server included in 4D NetKit is started on the port specified in this parameter to intercept the provider's authorization response.	No in signedIn mode, Yes in service mode
scope	text or collection	Text: A space-separated list of the Microsoft Graph permissions that you want the user to consent to. Collection: Collection of Microsoft Graph permissions.	Yes
tenant	text	Microsoft: The {tenant} value in the path of the request can be used to control who can sign into the application. The allowed values are: - "common" for both Microsoft accounts and work or school accounts (default value) - "organizations" for work or school accounts only - "consumers" for Microsoft accounts only - tenant identifiers such as tenant ID or domain name. Google (service mode only): Email address to be considered as the email address of the user for which the application is requesting delegated access.	Yes
authenticateURI	text	Uri used to do the Authorization request. Default for Microsoft: "https://login.microsoftonline.com/{tenant}/oauth2/v2.0/authorize". Default for Google: "https://accounts.google.com/o/oauth2/auth".	Yes
tokenURI	text	Uri used to request an access token. Default for Microsoft: "https://login.microsoftonline.com/{tenant}/oauth2/v2.0/token". Default for Google: "https://accounts.google.com/o/oauth2/token".	Yes
tokenExpiration	text	Timestamp (ISO 8601 UTC) that indicates the expiration time of the token.	Yes
clientSecret	text	The application secret that you created for your app in the app registration portal. Required for web apps.	Yes
token	object	If this property exists, the getToken() function uses this token object to calculate which request must be sent. It is automatically updated with the token received by the getToken() function.	Yes
timeout	real	Waiting time in seconds (by default 120s).	Yes
prompt	text	(Optional) A space-delimited, case-sensitive list of prompts to present the user. Possible values are: - none: Do not display any authentication or consent screens. Must not be specified with other values. - consent: Prompt the user for consent. - select_account: Prompt the user to select an account. (if you don't specify this parameter, the user will be prompted only the first time your project requests access. )	Yes
loginHint	text	(Optional) This option can be used to inform the Google Authentication Server which user is attempting to authenticate if your application is aware of this information. By prefilling the email field in the sign-in form or by selecting the appropriate multi-login session, the server uses the hint to simplify the login flow either. Set the parameter value to a sub-identifier or email address that corresponds to the user's Google ID.	Yes
accessType	text	(Recommended) Indicates whether your application can refresh access tokens when the user is not present at the browser. Valid parameter values are online (default) and offline. Set the value to offline if your application needs to update access tokens when the user is not present at the browser. This is how access tokens are refreshed. This value instructs the Google authorization server to return a refresh token and an access token the first time that your application exchanges an authorization code for tokens.	Yes
clientEmail	text	(mandatory, Google / service mode only) email address of the service account used	No
authenticationPage	text or file object	Path of the web page to display in the web browser when the authentication code is received correctly in signed in mode (If not present the default page is used).	Yes
authenticationErrorPage	text or file object	Path of the web page to display in the web browser when the authentication server returns an error in signed in mode (If not present the default page is used).	Yes
PKCEEnabled	boolean	false by default. If true, PKCE is used for OAuth 2.0 authentication and token requests and is only usable for permission=”SignIn”.	Yes
PKCEMethod	text	"S256" by default. The only supported values for this parameter are "S256" or "plain".	Yes
thumbprint	text	Certificate thumbprint. Only usable with permission="Service"	Yes (No for certificate based authentication)
privateKey	text	Certificate private key. Only usable with permission="Service". (Google / service mode only) Private key given by Google. Mandatory if .permission="service" and .name="Google"	Yes (No for certificate based authentication)
clientAssertionType	text	The format of the assertion as defined by the authorization server. The value is an absolute URI. Default value: "urn:ietf:params:oauth:client-assertion-type:jwt-bearer". Only usable with permission="Service"	Yes
browserAutoOpen	boolean	True (default value), the web browser is open automatically. Pass false if you don't want the web browser to open automatically.	Yes

If you want the .getToken() function to use the Assertion Framework described in the RFC 7521 to connect to the server, make sure to pass the thumbprint and privateKey properties. If clientSecret, thumbprint and privateKey are present, the thumbprint is used by default and the RFC 7521 is used to connect. For more information, please refer to the OAuth2.0 authentication using a certificate blog post.

Note: The authenticationPage and authenticationErrorPage and all the resources associated must be in the same folder.

Returned object

The OAuth2 provider returned object cs.NetKit.OAuth2Provider properties correspond to those of the paramObj object passed as a parameter and some additional properties:

Property	Type	Description
paramObj.properties		< properties passed in parameter paramObj>
authenticateURI	text	Returns the calculated authenticateURI. Can be used in a webbrowser or in a web area to open the connection page.
isTokenValid	Function	OAuth2Provider.isTokenValid() : boolean Verifies the token validity. - If no token is present, returns false. - If the current token is not expired, returns true. - If the token is expired and no refresh token is present, returns false. - If a refresh token is present, automatically requests a new token and returns true if the token is generated correctly, otherwise false.

Example 1

//authentication into google account and token retrieval

var $File1; $File2 : 4D.File
var $oAuth2 : cs.NetKit.OAuth2Provider
var $param: Object

$File1:=File("/RESOURCES/OK.html")
$File2:=File("/RESOURCES/KO.html")

$param:= New object
$param.name:="Google"
$param.permission:="signedIn"
$param.clientId:="xxxx"
$param.clientSecret:="xxxx"
$param.redirectURI:="http://127.0.0.1:50993/authorize/"
$param.scope:="https://www.googleapis.com/auth/gmail.send"
$param.authenticationPage:=$File1
$param.authenticationErrorPage:=$File2
// Create new OAuth2 object
$oAuth2:=cs.NetKit.OAuth2Provider.new($param)
// Ask for a token
$token:=$oAuth2.getToken()

Example 2

//Google account authentication using PKCE

var $credential:={}
// google
$credential.name:="Google"
$credential.permission:="signedIn"
$credential.clientId:="499730xxx"
$credential.clientSecret:="fc1kwxxx"
$credential.redirectURI:="http://127.0.0.1:50993/authorize/"
$credential.scope:="https://mail.google.com/"
// PKCE activation
$credential.PKCEEnabled:=True

var $oauth2:=cs.NetKit.OAuth2Provider.new($credential)
var $token:=Try($oauth2.getToken())
if ($token=null)
  ALERT("Error: "+Last errors[0].message)
end if

Example 3

// Initial authentication with Microsoft OAuth2 and retrieval of token with refresh token

// Define OAuth2 provider details for Microsoft
$provider:=New object()
$provider.name:="Microsoft"
$provider.permission:="signedIn"
$provider.clientId:="xxx-xxx-xxx-xxx-c460fc"
$provider.redirectURI:="http://127.0.0.1:50993/authorize/"
$provider.scope:="https://graph.microsoft.com/.default"

// Use the "offline" parameter to request a refresh token in addition to the regular access token
$provider.accessType:="offline"

// Create new OAuth2 object for Microsoft
$OAuth:= cs.NetKit.OAuth2Provider.new ($provider)

// Request the token, which includes the refresh token
var $myCurrentToken : Object := $OAuth.getToken()

// After receiving the token and refresh token, save it for future token requests

#DECLARE($myCurrentToken : object)
var $provider:=New object()
$provider.name:="Microsoft"
$provider.permission:="signedIn"
$provider.clientId:="xxx-xxx-xxx-xxx-c460fc"
$provider.redirectURI:="http://127.0.0.1:50993/authorize/"
$provider.scope:="https://graph.microsoft.com/.default"

// Include the token from the previous request
$provider.token:=$myCurrentToken

// Re-create OAuth2 object with the stored token
$OAuth:= cs.NetKit.OAuth2Provider.new ($provider)

// getToken() checks if the token has expired
// If the token is still valid, it returns the current token
// If the token has expired, it automatically requests a new one
// If a refresh token is present, the token is automatically renewed without user sign-in
// If no refresh token is available, the user will need to sign in again
$myCurrentToken:=$OAuth.getToken()

Note: Some servers, like Google, do not always return the refresh token during subsequent token requests. In such cases, you should remember to include the refresh token in the token object before saving it for future use.

OAuth2ProviderObject.getToken()

OAuth2ProviderObject.getToken() : Object

Parameter	Type		Description
Result	Object	<-	Object that holds information on the token retrieved

Description

.getToken() returns an object that contains a token property (as defined by the IETF), as well as optional additional information returned by the server:

Property	Object properties	Type	Description
token		Object	Token returned
	expires_in	Text	How long the access token is valid (in seconds).
	access_token	Ttext	The requested access token.
	refresh_token	Text	Your app can use this token to acquire additional access tokens after the current access token expires. Refresh tokens are long-lived, and can be used to retain access to resources for extended periods of time. Available only if the value of the permission property is "signedIn".
	token_type	Text	Indicates the token type value. The only token type that Azure AD supports is "Bearer".
	scope	Text	A space separated list of the Microsoft Graph permissions that the access_token is valid for.
tokenExpiration		Text	Timestamp (ISO 8601 UTC) that indicates the expiration time of the token

If the value of token is empty, the command sends a request for a new token.

If the token has expired:

• If the token object has the refresh_token property, the command sends a new request to refresh the token and returns it.
• If the token object does not have the refresh_token property, the command automatically sends a request for a new token.

When requesting access on behalf of a user ("signedIn" mode) the command opens a web browser to request authorization.

In "signedIn" mode, when .getToken() is called, a web server included in 4D NetKit starts automatically on the port specified in the redirectURI parameter to intercept the provider's authorization response and display it in the browser.

Office365

The Office365 class allows you to call the Microsoft Graph API to:

• get information from Office365 applications, such as user information
• create, move or send emails

This can be done after a valid token request, (see OAuth2Provider object).

The Office365 class can be instantiated in two ways:

• by calling the New Office365 provider method
• by calling the cs.NetKit.Office365.new() function

New Office365 provider

New Office365 provider( paramObj : Object { ; options : Object } ) : cs.NetKit.Office365

Parameters

Parameter	Type		Description
paramObj	cs.NetKit.OAuth2Provider	->	Object of the OAuth2Provider class
options	Object	->	Additional options
Result	cs.NetKit.Office365	<-	Object of the Office365 class

Description

New Office365 provider instantiates an object of the Office365 class.

In paramObj, pass an OAuth2Provider object.

In options, you can pass an object that specifies the following options:

Property	Type	Description
mailType	Text	Indicates the Mail type to use to send and receive emails. Possible types are: - "MIME" - "JMAP" - "Microsoft" (default)

Returned object

The returned Office365 object contains the following properties:

Property		Type	Description
mail		Object	Email handling object
	send()	Function	Sends the emails
	type	Text	(read-only) Mail type used to send and receive emails. Default is "Microsoft", can bet set using the mailType option
	userId	Text	User identifier, used to identify the user in Service mode. Can be the id or the userPrincipalName

Example 1

To create the OAuth2 connection object and an Office365 object:

var $oAuth2: cs.NetKit.OAuth2Provider
var $office365 : cs.NetKit.Office365

$oAuth2:=New OAuth2 provider($param)
$office365:=New Office365 provider($oAuth2;New object("mailType"; "Microsoft"))

Example 2

Refer to this tutorial for an example of connection in Service mode.

Office365.mail.append()

Office365.mail.append( email : Object ; folderId : Text) : Object

Parameters

Parameter	Type		Description
email	Object	->	Microsoft message object to append
folderId	Text	->	Id of the destination folder. Can be a folder id or a Well-known folder name.
Result	Object	<-	Status object

Description

Office365.mail.append() creates a draft email in the folderId folder.

In email, pass the email to create. It must be of the Microsoft mail object type.

Returned object

The method returns a status object.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadWrite
Application	Mail.ReadWrite

Example

$status:=$office365.mail.append($draft; $folder.id)

Office365.mail.copy()

Office365.mail.copy( mailId : Text ; folderId : Text) : Object

Parameters

Parameter	Type		Description
mailId	Text	->	Id of the mail to copy
folderId	Text	->	Id of the destination folder. Can be a folder id or a Well-known folder name.
Result	Object	<-	Status object

Description

Office365.mail.copy() copies the mailId email to the folderId folder within the user's mailbox.

Returned object

The method returns a status object.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadWrite
Application	Mail.ReadWrite

Example

To copy an email from a folder to another:

$status:=$office365.mail.copy($mailId; $folderId)

Office365.mail.createFolder()

Office365.mail.createFolder( name : Text { ; isHidden : Boolean { ; parentFolderId : Text } }) : Object

Parameters

Parameter	Type		Description
name	Text	->	Display name of the new folder
isHidden	Boolean	->	True to create a hidden folder (Default is False)
parentFolderId	Text	->	ID of the parent folder to get. Can be a folder id or a Well-known folder name.
Result	Object	<-	Status object

Office365.mail.getFolder() creates a new folder named name and returns its ID in the status object.

By default, the new folder is not hidden. Pass True in the isHidden parameter to create a hidden folder. This property cannot be changed afterwards. Find more information in Hidden mail folders on the Microsoft web site.

By default, the new folder is created at the root folder of the mailbox. If you want to create it within an existing folder, pass its id in the parentFolderId parameter.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadWrite
Application	Mail.ReadWrite

Returned object

The method returns a status object.

Example

You want to create a "Backup" mail folder at the root of your mailbox and move an email to this folder:

// Creates a new folder on the root
$status:=$office365.mail.createFolder("Backup")
If($status.success=True)
	$folderId:=$status.id
		// Moves your email in the new folder
	$status:=$office365.mail.move($mailId; $folderId)
End if

Office365.mail.delete()

Office365.mail.delete( mailId : Text ) : Object

Parameters

Parameter	Type		Description
mailId	Text	->	Id of the mail to delete
Result	Object	<-	Status object

Description

Office365.mail.delete() deletes the mailId email.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadWrite
Application	Mail.ReadWrite

Returned object

The method returns a status object.

Note: You may not be able to delete items in the recoverable items deletions folder (for more information, see the Microsoft's documentation website).

Example

You want to delete all mails in the $mails collection:

For each($mail;$mails)
	$office365.mail.delete($mail.id)
End for each

Office365.mail.deleteFolder()

Office365.mail.deleteFolder( folderId : Text ) : Object

Parameters

Parameter	Type		Description
folderId	Text	->	ID of the folder to delete. Can be a folder id or a Well-known folder name if one exists.
Result	Object	<-	Status object

Description

Office365.mail.deleteFolder() deletes the folderId mail folder.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadWrite
Application	Mail.ReadWrite

Returned object

The method returns a status object.

Example

$status:=$office365.mail.deleteFolder($folderId)

Office365.mail.getFolder()

Office365.mail.getFolder( folderId : Text ) : Object

Parameters

Parameter	Type		Description
folderId	Text	->	ID of the folder to get. Can be a folder ID or a Well-known folder name.
Result	Object	<-	mailFolder object

Office365.mail.getFolder() allows you to get a mailFolder object from its folderId.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadBasic, Mail.Read, Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadBasic, Mail.Read, Mail.ReadWrite
Application	Mail.ReadBasic.All, Mail.Read, Mail.ReadWrite

mailFolder object

The method returns a mailFolder object containing the following properties (additional information can be returned by the server):

Property	Type	Description
childFolderCount	Integer	Number of immediate child mailFolders in the current mailFolder
displayName	Text	mailFolder's display name
id	Text	mailFolder's unique identifier
isHidden	Boolean	Indicates whether the mailFolder is hidden. This property can be set only when creating the folder. Find more information in Hidden mail folders on the Microsoft web site.
parentFolderId	Text	Unique identifier for the mailFolder's parent mailFolder.
totalItemCount	Integer	Number of items in the mailFolder.
unreadItemCount	Integer	Number of items in the mailFolder marked as unread.

Office365.mail.getFolderList()

Office365.mail.getFolderList( options : Object ) : Object

Parameters

Parameter	Type		Description
options	Object	->	Description of folders to get
Result	Object	<-	Status object that contains folder list and other information

Office365.mail.getFolderList() allows you to get a mail folder collection of the signed-in user.

In options, pass an object to define the folders to get. The available properties for that object are (all properties are optional):

Property	Type	Description
folderId	text	Can be a folder id or a Well-known folder name. - If it is a parent folder id, get the folder collection under the specified folder (children folders - If the property is omitted or its value is "", get the mail folder collection directly under the root folder.
search	text	Restricts the results of a request to match a search criterion. The search syntax rules are available on Microsoft's documentation website.
filter	text	Allows retrieving just a subset of folders. See Microsoft's documentation on filter parameter.
select	text	Set of properties to retrieve. Each property must be separated by a comma (,).
top	integer	Defines the page size for a request. Maximum value is 999. If top is not defined, default value is applied (10). When a result set spans multiple pages, you can use the .next() function to ask for the next page. See Microsoft's documentation on paging for more information.
orderBy	text	Defines how returned items are ordered. Default is ascending order. Syntax: "fieldname asc" or "fieldname desc" (replace "fieldname" with the name of the field to be arranged).
includeHiddenFolders	boolean	True to include hidden folders in the response. False (default) to not return hidden folders.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadBasic, Mail.Read, Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadBasic, Mail.Read, Mail.ReadWrite
Application	Mail.ReadBasic.All, Mail.Read, Mail.ReadWrite

Returned object

The method returns a status object containing the following properties:

Property		Type	Description
errors		Collection	Collection of 4D error items (not returned if an Office 365 server response is received)
	[].errcode	Integer	4D error code number
	[].message	Text	Description of the 4D error
	[].componentSignature	Text	Signature of the internal component that returned the error
isLastPage		Boolean	True if the last page is reached
page		Integer	Folder information page number. Starts at 1. By default, each page holds 10 results. Page size limit can be set in the top option.
next()		Function	Function that updates the folders collection with the next mail information page and increases the page property by 1. Returns a boolean value: - If a next page is successfully loaded, returns True - If no next page is returned, the folders collection is not updated and False is returned
previous()		Function	Function that updates the folders collection with the previous folder information page and decreases the page property by 1. Returns a boolean value: - If a previous page is successfully loaded, returns True - If no previous page is returned, the folders collection is not updated and False is returned
statusText		Text	Status message returned by the Office 365 server, or last error returned in the 4D error stack
success		Boolean	True if the Office365.mail.getFolderList() call is successful, False otherwise
folders		Collection	Collection of mailFolder objects with information on folders.
	[].childFolderCount	Integer	The number of immediate child mailFolders in the current mailFolder.
	[].displayName	Text	The mailFolder's display name.
	[].id	Text	The mailFolder's unique identifier.
	[].isHidden	Boolean	Indicates whether the mailFolder is hidden. This property can be set only when creating the folder. Find more information in Hidden mail folders.
	[].parentFolderId	Text	The unique identifier for the mailFolder's parent mailFolder.
	[].totalItemCount	Integer	The number of items in the mailFolder.
	[].unreadItemCount	Integer	The number of items in the mailFolder marked as unread.

The method returns an empty collection in the folders property if:

• no folders are found at the defined location
• an error is thrown

Example

You want to :

//get the mail folder collection under the root folder (in $result.folders)
var $result : Object
$result:=$office365.mail.getFolderList()

//get the mail subfolder collection under the 9th folder
var $subfolders : Collection
$subfolders:=$office365.mail.getFolderList($result.folders[8].id)

Office365.mail.getMail()

Office365.mail.getMail( mailId : Text { ; options : Object } ) : Object
Office365.mail.getMail( mailId : Text { ; options : Object } ) : Blob

Parameters

Parameter		Type		Description
mailId		Text	->	Id of the mail to get
options		Object	->	Format options for the returned mail object
	mailType	Text		Type of the mail object to return. Available values: - "MIME" - "JMAP" - "Microsoft" (default) By default if omitted, the same format as the mail.type property is used
	contentType	Text		Format of the body and uniqueBody properties to be returned. Available values: - "text" - "html" (default)
Result		Blob | Object	<-	Downloaded mail

Office365.mail.getMail() allows you to get a single mail from its mailId.

By default, the mail is returned with its original format, as defined in the mail.type property of the provider. However, you can convert it to any type using the mailType property of the options parameter.

You can also select the preferred format of the body and uniqueBody properties of the returned mail using the contentType property of the options parameter.

The data type of the function result depends on the mail type:

Mail type	Function result
MIME	Blob
JMAP	Object
Microsoft	Object

If an error occurs, the function returns Null and an error is generated.

See also Microsoft's documentation website.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadBasic, Mail.Read
Delegated (personal Microsoft account)	Mail.ReadBasic, Mail.Read
Application	Mail.ReadBasic.All, Mail.Read

Example

Download a specific email:

$mail:=$office.mail.getMail($mailId)

Office365.mail.getMails()

Office365.mail.getMails( options : Object ) : Object

Parameters

Parameter	Type		Description
options	Object	->	Description of mails to get
Result	Object	<-	Status object that contains mail list and other information

Office365.mail.getMails() allows you to get messages in the signed-in user's mailbox (for detailed information, please refer to the Microsoft's documentation website).

This method returns mail bodies in HTML format only.

In options, pass an object to define the mails to get. The available properties for that object are (all properties are optional):

Property	Type	Description
folderId	text	To get messages in a specific folder. Can be a folder id or a Well-known folder name. If the destination folder is not present or empty, get all the messages in a user's mailbox.
search	text	Restricts the results of a request to match a search criterion. The search syntax rules are available on Microsoft's documentation website.
filter	text	Allows retrieving just a subset of mails. See Microsoft's documentation on filter parameter.
select	text	Set of properties of the Microsoft Mail object to retrieve. Each property must be separated by a comma (,).
top	integer	Defines the page size for a request. Maximum value is 999. If top is not defined, default value is applied (10). When a result set spans multiple pages, you can use the .next() function to ask for the next page. See Microsoft's documentation on paging for more information.
orderBy	text	Defines how returned items are ordered. Default is ascending order. Syntax: "fieldname asc" or "fieldname desc" (replace "fieldname" with the name of the field to be arranged).

Returned object

The method returns a status object containing the following properties:

Property		Type	Description
errors		Collection	Collection of 4D error items (not returned if an Office 365 server response is received)
	[].errcode	Integer	4D error code number
	[].message	Text	Description of the 4D error
	[].componentSignature	Text	Signature of the internal component that returned the error
isLastPage		Boolean	True if the last page is reached
page		Integer	Mail information page number. Starts at 1. By default, each page holds 10 results. Page size limit can be set in the top option.
next()		Function	Function that updates the mails collection with the next mail information page and increases the page property by 1. Returns a boolean value: - If a next page is successfully loaded, returns True - If no next page is returned, the mails collection is not updated and False is returned
previous()		Function	Function that updates the folders collection with the previous mail information page and decreases the page property by 1. Returns a boolean value: - If a previous page is successfully loaded, returns True - If no previous page is returned, the mails collection is not updated and False is returned
statusText		Text	Status message returned by the Office 365 server, or last error returned in the 4D error stack
success		Boolean	True if the Office365.mail.getFolderList() call is successful, False otherwise
mails		Collection	Collection of Microsoft mail objects. If no mail is returned, the collection is empty

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadBasic, Mail.Read, Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadBasic, Mail.Read, Mail.ReadWrite
Application	Mail.ReadBasic.All, Mail.Read, Mail.ReadWrite

Example

You want to retrieve sender and subject properties of all the mails present in the Inbox folder, using its well-known folder name:

$param:=New object
$param.folderId:="inbox"
$param.select:="sender,subject"

$mails:=$office365.mail.getMails($param)

Office365.mail.move()

Office365.mail.move( mailId : Text ; folderId : Text) : Object

Parameters

Parameter	Type		Description
mailId	Text	->	Id of the mail to move
folderId	Text	->	Id of the destination folder. Can be a folder id or a Well-known folder name.
Result	Object	<-	Status object

Description

Office365.mail.move() moves the mailId email to the folderId folder. It actually creates a new copy of the email in the destination folder and removes the original email from its source folder.

Returned object

The method returns a status object.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadWrite
Application	Mail.ReadWrite

Example

To move an email from a folder to another:

$status:=$office365.mail.move($mailId; $folderId)

Office365.mail.renameFolder()

Office365.mail.renameFolder( folderId : Text ; name : Text ) : Object

Parameters

Parameter	Type		Description
folderId	Text	->	ID of the folder to rename
name	Text	->	New display name for the folder
Result	Object	<-	Status object

Description

Office365.mail.renameFolder() renames the folderId mail folder with the provided name.

Note that the renamed folder ID is different from the folderId. You can get it in the returned status object.

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.ReadWrite
Delegated (personal Microsoft account)	Mail.ReadWrite
Application	Mail.ReadWrite

Returned object

The method returns a status object.

Example

You want to rename the the "Backup" folder to "Backup_old":

$status:=$office365.mail.renameFolder($folderId; "Backup_old")

Office365.mail.reply()

Office365.mail.reply( reply : Object ; mailId : Text { ; replyAll : Boolean } ) : Object

Parameters

Parameter		Type		Description
reply		Object	->	reply object
	message	Text | Blob | Object	->	Microsoft message (object) or JMAP (object) or MIME (Blob / Text) that contains the reponse
	comment	Text	->	(only available with Microsoft message object or no message) Message used as body to reply to the email when present. You must specify either a comment or the body property of the message parameter; specifying both will return an HTTP 400 Bad Request error.
mailId		Text	->	Id of the mail to which you reply
replyAll		Boolean	->	True to reply to all recipients of the message. Default=False
Result	Object	<-	Status object

Description

Office365.mail.reply() replies to the sender of mailId message and, optionnally, to all recipients of the message.

Note: Some mails, like drafts, cannot be replied.

If you pass False in replyAll and if the original message specifies a recipient in the replyTo property, the reply is sent to the recipients in replyTo and not to the recipient in the from property.

Returned object

The method returns a status object

Permissions

One of the following permissions is required to call this API. For more information, including how to choose permissions, see the Permissions section on the Microsoft documentation.

Permission type	Permissions (from least to most privileged)
Delegated (work or school account)	Mail.Send
Delegated (personal Microsoft account)	Mail.Send
Application	Mail.Send

Example

To reply to an email and create a conversation:

$reply:=New object
// Text that will be send as reply
$reply.comment:="Thank you for your message"
$status:=$office365.mail.reply($reply; $mails.mailId)

Office365.mail.send()

Office365.mail.send( email : Text ) : Object
Office365.mail.send( email : Object ) : Object
Office365.mail.send( email : Blob ) : Object

Parameters

Parameter	Type		Description
email	Text | Blob | Object	->	Email to be sent
Result	Object	<-	Status object

Description

Office365.mail.send() sends an email using the MIME or JSON formats.

In email, pass the email to be sent. Possible types:

• Text or Blob: the email is sent using the MIME format
• Object: the email is sent using the JSON format, in accordance with either:
  • the Microsoft mail object properties
  • the 4D email object format, which follows the JMAP specification

The data type passed in email must be compatible with the Office365.mail.type property. In the following example, since the mail type is Microsoft, $email must be an object. For the list of available properties, see Microsoft mail object's properties:

$Office365:=New Office365 provider($token; New object("mailType"; "Microsoft"))
$status:=$Office365.mail.send($email)

To avoid authentication errors, make sure your application asks for permission to send emails through the Microsoft Graph API. See Permissions.

Returned object

The method returns a status object.

Office365.mail.update()

Office365.mail.update( mailId : Text ; updatedFields : Object ) : Object

Parameters

Parameter	Type		Description
mailId	Text	->	The ID of the email to update
updatedFields	Object	->	email fields to update
Result	Object	<-	Status object

Description

Office365.mail.update() allows you to update various properties of received or drafted emails.

In updatedFields, you can pass several properties:

Property	Type	Description	Updatable only if isDraft = true
bccRecipients	Recipient	The Bcc recipients for the message.
body	ItemBody	The body of the message.	X
categories	String collection	The categories associated with the message.
ccRecipients	Recipient collection	The Cc recipients for the message.
flag	followupFlag	The flag value that indicates the status, start date, due date, or completion date for the message.
from	Recipient	The mailbox owner and sender of the message. Must correspond to the actual mailbox used.	X
importance	String	The importance of the message. The possible values are: Low, Normal, High.
inferenceClassification	String	The classification of the message for the user, based on inferred relevance or importance, or on an explicit override. The possible values are: focused or other.
internetMessageId	String	The message ID in the format specified by RFC2822.	X
isDeliveryReceiptRequested	Boolean	Indicates whether a read receipt is requested for the message.	X
isRead	Boolean	Indicates whether the message has been read.
isReadReceiptRequested	Boolean	Indicates whether a read receipt is requested for the message.	X
replyTo	Recipient collection	The email addresses to use when replying.	X
sender	Recipient	The account that is actually used to generate the message. Updatable when sending a message from a shared mailbox, or sending a message as a delegate. In any case, the value must correspond to the actual mailbox used.	X
subject	String	The subject of the message.	X
toRecipients	Recipient collection	The To recipients for the message.

Notes:

• Existing properties that are not included in the updatedFields object will maintain their previous values or be recalculated based on changes to other property values.
• Specific properties, such as the body or subject, can only be updated for emails in draft status (isDraft = true).

Returned object

The method returns a status object.

Well-known folder names

Outlook creates certain folders for users by default. Instead of using the corresponding folder id value, for convenience, you can use the well-known folder name when accessing these folders. Well-known names work regardless of the locale of the user's mailbox. For example, you can get the Drafts folder using its well-known name "draft". For more information, please refer to the Microsoft Office documentation.

"Microsoft" mail object properties

When you send an email with the "Microsoft" mail type, you must pass an object to Office365.mail.send(). For a comprehensive list of properties supported by Microsoft mail objects, please refer to the Microsoft Office documentation. Most common properties are listed below:

Property	Type	Description
attachments	attachment collection	The attachments for the email.
bccRecipients	recipient collection	The Bcc: recipients for the message.
body	itemBody object	The body of the message. It can be in HTML or text format.
ccRecipients	recipient collection	The Cc: recipients for the message.
flag	followup flag object	The flag value that indicates the status, start date, due date, or completion date for the message.
from	recipient object	The owner of the mailbox from which the message is sent. In most cases, this value is the same as the sender property, except for sharing or delegation scenarios. The value must correspond to the actual mailbox used.
id	Text	Unique identifier for the message (note that this value may change if a message is moved or altered).
importance	Text	The importance of the message. The possible values are: low, normal, and high.
internetMessageHeaders	internetMessageHeader collection	A collection of message headers defined by RFC5322. The set includes message headers indicating the network path taken by a message from the sender to the recipient.
isDeliveryReceiptRequested	Boolean	Indicates whether a delivery receipt is requested for the message.
isReadReceiptRequested	Boolean	Indicates whether a read receipt is requested for the message.
replyTo	recipient collection	The email addresses to use when replying.
sender	recipient object	The account that is actually used to generate the message. In most cases, this value is the same as the from property. You can set this property to a different value when sending a message from a shared mailbox, for a shared calendar, or as a delegate. In any case, the value must correspond to the actual mailbox used. Find out more about setting the from and sender properties of a message.
subject	Text	The subject of the message.
toRecipients	recipient collection	The To: recipients for the message.

Attachment object

Property	Type	Description
@odata.type	Text	always "#microsoft.graph.fileAttachment" (note that the property name requires that you use the [""] syntax)
contentBytes	Text	The base64-encoded contents of the file (only to send mails)
contentId	Text	The ID of the attachment in the Exchange store.
contentType	Text	The content type of the attachment.
id	Text	The attachment ID. (cid)
isInline	Boolean	Set to true if this is an inline attachment.
name	Text	The name representing the text that is displayed below the icon representing the embedded attachment.This does not need to be the actual file name.
size	Number	The size in bytes of the attachment.
getContent()	Function	Returns the contents of the attachment object in a 4D.Blob object.

itemBody object

Property	Type	Description	Can be null of undefined
content	Text	The content of the item.	No
contentType	Text	The type of the content. Possible values are "text" and "html"	No

recipient object

Property		Type	Description	Can be null of undefined
emailAddress		Object		Yes
	address	Text	The email address of the person or entity.	No
	name	Text	The display name of the person or entity.	Yes

internetMessageHeader object

Property	Type	Description	Can be null of undefined
name	Text	Represents the key in a key-value pair.	No
value	Text	The value in a key-value pair.	No

followup flag object

Property	Type	Description
dueDateTime	dateTime | TimeZone	The date and time that the follow up is to be finished. Note: To set the due date, you must also specify the startDateTime; otherwise, you will get a 400 Bad Request response.
flagStatus	Text	The status for follow-up for an item. Possible values are "notFlagged", "complete", and "flagged".
startDateTime	dateTime | TimeZone	The date and time that the follow-up is to begin.

dateTime and TimeZone

Property	Type	Description
dateTime	Text	A single point of time in a combined date and time representation ({date}T{time}; for example, 2017-08-29T04:00:00.0000000).
timeZone	Text	Represents a time zone, for example, "Pacific Standard Time". See below for more possible values.

In general, the timeZone property can be set to any of the time zones currently supported by Windows, as well as the additional time zones supported by the calendar API:

• Default time zones
• Additional time zones

Example: Create an email with a file attachment and send it

Send an email with an attachment, on behalf of a Microsoft 365 user:

var $oAuth2 : cs.NetKit.OAuth2Provider
var $token; $param; $email; $status : Object

// Set up authentication
$param:=New object()
$param.name:="Microsoft"
$param.permission:="signedIn"
$param.clientId:="your-client-id" // Replace with your client ID
$param.redirectURI:="http://127.0.0.1:50993/authorize/"
// Ask permission to send emails on behalf of the Microsoft user
$param.scope:="https://graph.microsoft.com/Mail.Send"  

$oAuth2:=New OAuth2 provider($param)

$token:=$oAuth2.getToken()

// Create the email, specify the sender and the recipient
$email:=New object()
$email.from:=New object("emailAddress"; New object("address"; "senderAddress@hotmail.fr")) // Replace with sender's email
$email.toRecipients:=New collection(New object("emailAddress"; New object("address"; "recipientAddress@hotmail.fr")))
$email.body:=New object()
$email.body.content:="Hello, World!"
$email.body.contentType:="html"
$email.subject:="Hello, World!"

// Create a text file and attach it to the email
var $attachment : Object
var $attachmentText : Text

$attachmentText:="Simple text file"
BASE64 ENCODE($attachmentText)
$attachment:=New object
$attachment["@odata.type"]:="#microsoft.graph.fileAttachment"
$attachment.name:="attachment.txt"
$attachment.contentBytes:=$attachmentText
$email.attachments:=New collection($attachment)

// Send the email
$Office365:=New Office365 provider($token; New object("mailType"; "Microsoft"))
$status:=$Office365.mail.send($email)

Status object

Several Office365.mail functions return a standard **status object**, containing the following properties:

Property	Type	Description
success	Boolean	True if the operation was successful
statusText	Text	Status message returned by the server or last error returned by the 4D error stack
errors	Collection	Collection of errors. Not returned if the server returns a statusText
id	Text	- copy() and move(): returned id of the mail. - createFolder() and renameFolder(): returned id of the folder

Basically, you can test the success and statusText properties of this object to know if the function was correctly executed.

Error handling

When an error occurs during the execution of an Office365.mail function:

• if the function returns a **status object**, the error is handled by the status object and no error is thrown,
• if the function does not return a status object, an error is thrown that you can intercept with a project method installed with ON ERR CALL.

Office365.user.get()

Office365.user.get( id : Text { ; select : Text }) : Object
Office365.user.get( userPrincipalName : Text { ; select : Text }) : Object

Parameters

Parameter	Type		Description
id	Text	->	Unique identifier of the user to search for
userPrincipalName	Text	->	User principal name (UPN) of the user to search for
select	Text	->	Set of properties to be returned
Result	Object	<-	Object holding information on the user

Description

Office365.user.get() returns information on the user whose ID matches the id parameter, or whose User Principal Name (UPN) matches the userPrincipalName parameter.

The UPN is an Internet-style login name for the user based on the Internet standard RFC 822. By convention, it should correspond to the user's email name.

If the ID or UPN is not found or connection fails, the command returns an object with Null as a value and throws an error.

In select, you can pass a string that contains a specific set of properties you want to retrieve. Each property must be separated by a comma (,). If the select parameter is omitted, the function returns an object with a predefined set of properties (see below).

The list of available properties is available on Microsoft's documentation website.

Returned object

By default, if the select parameter is omitted, the command returns an object with the following properties:

Property	Type	Description
id	Text	Unique identifier for the user
businessPhones	Collection	The user's phone numbers.
displayName	Text	Name displayed in the address book for the user.
givenName	Text	The user's first name.
jobTitle	Text	The user's job title.
mail	Text	The user's email address.
mobilePhone	Text	The user's cellphone number.
officeLocation	Text	The user's physical office location.
preferredLanguage	Text	The user's language of preference.
surname	Text	The user's last name.
userPrincipalName	Text	The user's principal name.

Otherwise, the object contains the properties specified in the select parameter.

For more details on user information, see Microsoft's documentation website.

Office365.user.getCurrent()

Office365.user.getCurrent({select : Text}) : Object

Description

Office365.user.getCurrent() returns information on the current user. In this case, it requires a signed-in user, and therefore a delegated permission.

The command returns a Null object if the session is not a sign-in session.

In select, pass a string that contains a set of properties you want to retrieve. Each property must be separated by a comma (,).

By default, if the select parameter is not defined, the command returns an object with a default set of properties (see the property table).

Example

To retrieve information from the current user:

var $userInfo; $params : Object
var $oAuth2 : cs.NetKit.OAuth2Provider
var $Office365 : cs.NetKit.Office365

// Set up parameters:
$params:=New object
$params.name:="Microsoft"
$params.permission:="signedIn"
$params.clientId:="your-client-id" // Replace with your Microsoft identity platform client ID
$params.redirectURI:="http://127.0.0.1:50993/authorize/"
$param.scope:="https://graph.microsoft.com/.default"

$oAuth2:=New Oauth2 provider($params) //Creates an OAuth2Provider Object

$Office365:=New Office365 provider($oAuth2) // Creates an Office365 object

// Return the properties specified in the parameter.
$userInfo:=$Office365.user.getCurrent("id,userPrincipalName,\
principalName,displayName,givenName,mail")

Office365.user.list()

Office365.user.list({options: Object}) : Object

Parameters

Parameter	Type		Description
options	Object	->	Additional options for the search
result	Object	<-	Object holding a collection of users and additional info on the request

Description

Office365.user.list() returns a list of Office365 users.

In options, you can pass an object to specify additional search options. The following table groups the available search options:

Property	Type	Description
search	Text	Restricts the results of a request to match a search criterion. The search syntax rules are available on Microsoft's documentation website.
filter	Text	Allows retrieving just a subset of users. See Microsoft's documentation on filter parameter.
select	Text	Set of properties to retrieve. Each property must be separated by a comma (,). By default, if select is not defined, the returned user objects have a default set of properties
top	Integer	Defines the page size for a request. Maximum value is 999. If top is not defined, the default value is applied (100). When a result set spans multiple pages, you can use the .next() function to ask for the next page. See Microsoft's documentation on paging for more information.
orderBy	Text	Defines how the returned items are ordered. By default, they are arranged in ascending order. The syntax is "fieldname asc" or "fieldname desc". Replace "fieldname" with the name of the field to be arranged.

Returned object

The returned object holds a collection of users as well as status properties and functions that allow you to navigate between different pages of results.

By default, each user object in the collection has the default set of properties listed in the Office365.user.get() function. This set of properties can be customized using the select parameter.

Property	Type	Description
errors	Collection	Collection of 4D error items (not returned if an Office 365 server response is received): - [].errcode is the 4D error code number - [].message is a description of the 4D error - [].componentSignature is the signature of the internal component that returned the error
isLastPage	Boolean	True if the last page is reached
page	Integer	User information page number. Starts at 1. By default, each page holds 100 results. Page size limit can be set in the top option.
next()	Function	Function that updates the users collection with the next user information page and increases the page property by 1. Returns a boolean value: - If a next page is successfully loaded, returns True - If no next page is returned, the users collection is not updated and False is returned
previous()	Function	Function that updates the users collection with the previous user information page and decreases the page property by 1. Returns a boolean value: - If a previous page is successfully loaded, returns True - If no previous page is returned, the users collection is not updated and False is returned
statusText	Text	Status message returned by the Office 365 server, or last error returned in the 4D error stack
success	Boolean	True if the Office365.user.list() operation is successful, False otherwise
users	Collection	Collection of objects with information on users.

Example

var $oAuth2 : cs.NetKit.OAuth2Provider
var $Office365 : cs.NetKit.Office365
var $userInfo; $params; $userList; $userList2; $userList3; $userList4 : Object
var $col : Collection

// Set up parameters:
$params:=New object
$params.name:="Microsoft"
$params.permission:="signedIn"
$params.clientId:="your-client-id" // Replace with your Microsoft identity platform client ID
$params.redirectURI:="http://127.0.0.1:50993/authorize/"
$params.scope:="https://graph.microsoft.com/.default"

// Create an OAuth2Provider Object
$oAuth2:=New OAuth2 provider($params)

// Create an Office365 object
$Office365:=New Office365 provider($oAuth2)

// Return a list with the first 100 users
$informationList1:=$Office365.user.list()

// Return a list of users whose displayName is Jean
$userList2:=$Office365.user.list(New object("filter"; "startswith(displayName,'Jean')"))

// return a list of users whose display names contain "F" and arrange it in descending order.
$userList3:=$Office365.user.list(New object("search"; "\"displayName:F\""; "orderBy"; "displayName desc"; "select"; "displayName"))

// Create a list filled with all the userPrincipalName

$userList4:=$Office365.user.list(New object("select"; "userPrincipalName"))
$col:=New collection
Repeat
    $col.combine($userList4.users)
Until (Not($userList4.next()))

Google

The Google class allows you to send emails through the Google REST API.

This can be done after a valid token request, (see OAuth2Provider object).

The Google class is instantiated by calling the cs.NetKit.Google.new() function.

cs.NetKit.Google.new()

cs.NetKit.Google.new( oAuth2 : cs.NetKit.OAuth2Provider { ; options : Object } ) : cs.NetKit.Google

Parameters

Parameter	Type		Description
oAuth2	cs.NetKit.OAuth2Provider	->	Object of the OAuth2Provider class
options	Object	->	Additional options
Result	cs.NetKit.Google	<-	Object of the Google class

Description

cs.NetKit.Google.new() instantiates an object of the Google class.

In oAuth2, pass an OAuth2Provider object.

In options, you can pass an object that specifies the following options:

Property	Type	Description
mailType	Text	Indicates the Mail type to use to send and receive emails. Possible types are: - "MIME" - "JMAP"

Returned object

The returned Google object contains the following properties:

Property		Type	Description
mail		Object	Email handling object
	send()	Function	Sends the emails
	type	Text	(read-only) Mail type used to send and receive emails. Can be set using the mailType option
	userId	Text	User identifier, used to identify the user in Service mode. Can be the id or the userPrincipalName

Example

To create the OAuth2 connection object and a Google object:

var $oAuth2 : cs.NetKit.OAuth2Provider
var $google : cs.NetKit.Google

$oAuth2:=New OAuth2 provider($param)
$google:=cs.NetKit.Google.new($oAuth2;New object("mailType"; "MIME"))

Google.mail.append()

Google.mail.append( mail : Text { ; labelIds : Collection } ) : Object
Google.mail.append( mail : Blob { ; labelIds : Collection } ) : Object
Google.mail.append( mail : Object { ; labelIds : Collection } ) : Object

Parameters

Parameter	Type		Description
mail	Text | Blob | Object	->	Email to be append
labelIds	Collection	->	Collection of label IDs to add to messages. By default the DRAFT label is applied
Result	Object	<-	Status object

Description

Google.mail.append() appends mail to the user's mailbox as a DRAFT or with designated labelIds.

If the labelIds parameter is passed and the mail has a "from" or "sender" header, the Gmail server automatically adds the SENT label.

Returned object

The method returns a status object with an additional "id" property:

Property	Type	Description
id	Text	id of the email created on the server
success	Boolean	see Status object
statusText	Text	see Status object
errors	Collection	see Status object

Example

To append an email :

$status:=$google.mail.append($mail)

By default, the mail is created with a DRAFT label. To change the designated label, pass a second parameter:

$status:=$google.mail.append($mail;["INBOX"])

Google.mail.createLabel()

Google.mail.createLabel( labelInfo : Object ) : Object

Parameters

Parameter	Type		Description
labelInfo	Object	->	Label information.
Result	Object	<-	Status object

Description

Google.mail.createLabel() creates a new label.

Returned object

The method returns a status object with an additional "label" property:

Property	Type	Description
label	Object	contains a newly created instance of Label (see labelInfo)
success	Boolean	see Status object
statusText	Text	see Status object
errors	Collection	see Status object

Example

To create a label named 'Backup':

$status:=$google.mail.createLabel({name: "Backup"})
$labelId:=$status.label.id

Google.mail.delete()

Google.mail.delete( mailID : Text { ; permanently : Boolean } ) : Object

Parameters

Parameter	Type		Description
mailID	Text	->	ID of the mail to delete
permanently	Boolean	->	if permanently is true, deletes a message permanently. Otherwise, moves the specified message to the trash
Result	Object	<-	Status object

Description

Google.mail.delete() deletes the specified message from the user's mailbox.

Returned object

The method returns a standard status object.

Permissions

This method requires one of the following OAuth scopes:

https://mail.google.com/
https://www.googleapis.com/auth/gmail.modify

Example

To delete an email permanently:

$status:=$google.mail.delete($mailId; True)

Google.mail.deleteLabel()

Google.mail.deleteLabel( labelId : Text ) : Object

Parameters

Parameter	Type		Description
labelId	Text	->	The ID of the label
Result	Object	<-	Status object

Description

Google.mail.deleteLabel() immediately and permanently deletes the specified label and removes it from any messages and threads that it is applied to.

This method is only available for labels with type="user".

Returned object

The method returns a standard status object.

Example

To delete a label:

$status:=$google.mail.deleteLabel($labelId)

Google.mail.getLabel()

Google.mail.getLabel( labelId : Text ) : Object

Parameters

Parameter	Type		Description
labelId	Text	->	The ID of the label
Result	Object	<-	labelInfo

Description

Google.mail.getLabel() returns the information of a label as a labelInfo object.

Returned object

The returned labelInfo object contains the following additional properties:

Property	Type	Description
messagesTotal	Integer	The total number of messages with the label.
messagesUnread	Integer	The number of unread messages with the label.
threadsTotal	Integer	The total number of threads with the label.
threadsUnread	Integer	The number of unread threads with the label.

Example

To retrieve the label name, total message count, and unread messages:

$info:=$google.mail.getLabel($labelId)
$name:=$info.name
$emailNumber:=$info.messagesTotal
$unread:=$info.messagesUnread

Google.mail.getLabelList()

Google.mail.getLabelList() : Object

Parameters

Parameter	Type		Description
Result	Object	<-	Status object

Description

Google.mail.getLabelList() returns an object containing the collection of all labels in the user's mailbox.

Returned object

The method returns a status object with an additional "labels" property:

Property	Type	Description
labels	Collection	Collection of mailLabel objects
success	Boolean	see Status object
statusText	Text	see Status object
errors	Collection	see Status object

mailLabel object

A mailLabel object contains the following properties (note that additional information can be returned by the server):

Property	Type	Description
name	Text	Display name of the label.
id	Text	Immutable ID of the label.
messageListVisibility	Text	Visibility of messages with this label in the message list in the Gmail web interface. Can be "show" or "hide"
labelListVisibility	Text	Visibility of the label in the label list in the Gmail web interface. Can be: - "labelShow": Show the label in the label list. - "labelShowIfUnread": Show the label if there are any unread messages with that label - "labelHide": Do not show the label in the label list.
type	Text	Owner type for the label: - "user": User labels are created by the user and can be modified and deleted by the user and can be applied to any message or thread. - "system": System labels are internally created and cannot be added, modified, or deleted. System labels may be able to be applied to or removed from messages and threads under some circumstances but this is not guaranteed. For example, users can apply and remove the INBOX and UNREAD labels from messages and threads, but cannot apply or remove the DRAFTS or SENT labels from messages or threads.

Google.mail.getMail()

Google.mail.getMail( mailID : Text { ; options : Object } ) : Object
Google.mail.getMail( mailID : Text { ; options : Object } ) : Blob

Parameters

Parameter	Type		Description
mailID	Text	->	ID of the message to retrieve
options	Object	->	Options
Result	Object | Blob	<-	Downloaded mail

Description

Google.mail.getMail() gets the specified message from the user's mailbox.

In options, you can pass several properties:

Property	Type	Description
format	Text	The format to return the message in. Can be: - "minimal": Returns only email message ID and labels; does not return the email headers, body, or payload. Returns a jmap object. - "raw": Returns the full email message (default) - "metadata": Returns only email message ID, labels, and email headers. Returns a jmap object.
headers	Collection	Collection of strings containing the email headers to be returned. When given and format is "metadata", only include headers specified.
mailType	Text	Only available if format is "raw". By default, the same as the mailType property of the mail (see cs.NetKit.Google.new()). If format="raw", the format can be: - "MIME" - "JMAP"

Returned object

The method returns a mail in one of the following formats, depending on the mailType:

Format	Type	Comment
MIME	Blob
JMAP	Object	Contains an id attribute

Google.mail.getMailIds()

Google.mail.getMailIds( { options : Object } ) : Object

Parameters

Parameter	Type		Description
options	Object	->	Options for messages to get
Result	Object	<-	Status object

Description

Google.mail.getMailIds() returns an object containing a collection of message ids in the user's mailbox.

In options, you can pass several properties:

Property	Type	Description
top	Integer	Maximum number of messages to return (default is 100). The maximum allowed value for this field is 500.
search	Text	Only return messages matching the specified query. Supports the same query format as the Gmail search box. For example, "from:someuser@example.com rfc822msgid:somemsgid@example.com is:unread". See also https://support.google.com/mail/answer/7190.
labelIds	Collection	Only return messages with labels that match all of the specified label IDs. Messages in a thread might have labels that other messages in the same thread don't have. To learn more, see Manage labels on messages and threads in Google documentation.
includeSpamTrash	Boolean	Include messages from SPAM and TRASH in the results. False by default.

Returned object

The method returns a status object with additional properties:

Property	Type	Description
isLastPage	Boolean	True if the last page is reached
page	Integer	Mail information page number. Starts at 1. By default, each page holds 10 results. Page size limit can be set in the top option.
next()	4D.Function object	Function that updates the mail collection with the next mail information page and increases the page property by 1. Returns a boolean value: - If a next page is successfully loaded, returns True - If no next page is returned, the mail collection is not updated and False is returned.
previous()	4D.Function object	Function that updates the mail collection with the previous mail information page and decreases the page property by 1. Returns a boolean value: - If a previous page is successfully loaded, returns True - If no previous page is returned, the mail collection is not updated and False is returned.
mailIds	Collection	Collection of objects, where each object contains: - id : Text : The id of the email - threadId : Text : The id of the thread to which this Email belongs - If no mail is returned, the collection is empty.
success	Boolean	see Status object
statusText	Text	see Status object
errors	Collection	see Status object

Permissions

This method requires one of the following OAuth scopes:

https://www.googleapis.com/auth/gmail.modify
https://www.googleapis.com/auth/gmail.readonly
https://www.googleapis.com/auth/gmail.metadata

Google.mail.getMails()

Google.mail.getMails( mailIDs : Collection { ; options : Object } ) : Collection

Parameters

Parameter	Type		Description
mailIDs	Collection	->	Collection of strings (mail IDs), or a collection of objects (each object contains an ID property)
options	Object	->	Options
Result	Collection	<-	Collection of mails in format depending on mailType: JMAP (collection of objects) or MIME (collection of blobs) If no mail is returned, the collection is empty

Description

Google.mail.getMails() gets a collection of emails based on the specified mailIDs collection.

The maximum number of IDs supported is 100. In order to get more than 100 mails, it's necessary to call the function multiple times; otherwise, the Google.mail.getMails() function returns null and throws an error.

In options, you can pass several properties:

Property	Type	Description
format	Text	The format to return the message in. Can be: - "minimal": Returns only email message ID and labels; does not return the email headers, body, or payload. Returns a jmap object. - "raw": Returns the full email message (default) - "metadata": Returns only email message ID, labels, and email headers. Returns a jmap object.
headers	Collection	Collection of strings containing the email headers to be returned. When given and format is "metadata", only include headers specified.
mailType	Text	Only available if format is "raw". By default, the same as the mailType property of the mail (see cs.NetKit.Google.new()). If format="raw", the format can be: - "MIME" - "JMAP"(Default)

Returned value

The method returns a collection of mails in one of the following formats, depending on the mailType:

Format	Type	Comment
MIME	Blob
JMAP	Object	Contains an id attribute

Google.mail.send()

Google.mail.send( email : Text ) : Object
Google.mail.send( email : Object ) : Object
Google.mail.send( email : Blob ) : Object

Parameters

Parameter	Type		Description
email	Text | Blob | Object	->	Email to be sent
Result	Object	<-	Status object

Description

Google.mail.send() sends an email using the MIME or JMAP formats.

In email, pass the email to be sent. Possible types:

• Text or Blob: the email is sent using the MIME format
• Object: the email is sent using the JSON format, in accordance with the 4D email object format, which follows the JMAP specification.

The data type passed in email must be compatible with the Google.mail.type property. In the following example, since the mail type is JMAP, $email must be an object:

$Google:=cs.NetKit.Google.new($token;{mailType:"JMAP"})
$status:=$Google.mail.send($email)

To avoid authentication errors, make sure your application has appropriate authorizations to send emails. One of the following OAuth scopes is required: modify, compose, or send. For more information, see the Authorization guide.

Returned object

The method returns a standard status object.

Google.mail.untrash()

Google.mail.untrash( mailID : Text ) : Object

Parameters

Parameter	Type		Description
mailID	Text	->	The ID of the message to remove from Trash
Result	Object	<-	Status object

Description

Google.mail.untrash() removes the specified message from the trash.

Returned object

The method returns a standard status object.

Permissions

This method requires one of the following OAuth scopes:

https://mail.google.com/
https://www.googleapis.com/auth/gmail.modify

Google.mail.update()

Google.mail.update( mailIDs : Collection ; options : Object) : Object

Parameters

Parameter	Type		Description
mailIDs	Collection	->	Collection of strings (mail IDs), or collection of objects (each object contains an ID property)
options	Object	->	Options
Result	Object	<-	Status object

There is a limit of 1000 IDs per request.

Description

Google.mail.update() adds or removes labels on the specified messages to help categorizing emails. The label can be a system label (e.g., NBOX, SPAM, TRASH, UNREAD, STARRED, IMPORTANT) or a custom label. Multiple labels could be applied simultaneously.

For more information check out the label management documentation.

In options, you can pass the following two properties:

Property	Type	Description
addLabelIds	Collection	A collection of label IDs to add to messages.
removeLabelIds	Collection	A collection of label IDs to remove from messages.

Returned object

The method returns a standard status object.

Example

To mark a collection of emails as "unread":

$result:=$google.mail.update($mailIds; {addLabelIds: ["UNREAD"]})

Google.mail.updateLabel()

Google.mail.updateLabel( labelId : Text ; labelInfo : Object ) : Object

Parameters

Parameter	Type		Description
labelId	Text	->	The ID of the label
labelInfo	Object	->	Label information to update
Result	Object	<-	Status object

Description

Google.mail.updateLabel() updates the specified label.

This method is only available for labels with type="user".

Returned object

The method returns a status object with an additional "label" property:

Property	Type	Description
label	Object	contains an instance of Label (see labelInfo)
success	Boolean	see Status object
statusText	Text	see Status object
errors	Collection	see Status object

Example

To update a previously created label to 'Backup January':

$status:=$google.mail.updateLabel($labelId; {name:"Backup January"})

Google.user.get()

Google.user.get( id : Text {; select : Text } ) : Object
Google.user.get( id : Text {; select : Collection } ) : Object

Parameters

Parameter	Type		Description
id	Text	->	The resourceName of the person to provide information about. Use the resourceName field returned by Google.user.list() to specify the person.
select	Text | Collection	->	Text: A comma-separated list of specific fields that you want to retrieve from each person (e.g., "names, phoneNumbers"). Collection: Collection of the specific fields.
Result	Object	<-	Represents user's details, like names, emails, and phone numbers based on the selected fields.

Description

Google.user.get() provides information about a user based on the resourceName provided in id and fields optionally specified in select.

Supported fields include addresses, ageRanges, biographies, birthdays, calendarUrls, clientData, coverPhotos, emailAddresses, events, externalIds, genders, imClients, interests, locales, locations, memberships, metadata, miscKeywords, names, nicknames, occupations, organizations, phoneNumbers, photos, relations, sipAddresses, skills, urls, userDefined.

Returned object

The returned user object contains values for the specified field(s).

If no fields have been specified in select, Google.user.get() returns emailAddresses and names. Otherwise, it returns only the specified field(s).

Permissions

No authorization required to access public data. For private data, one of the following OAuth scopes is required:

https://www.googleapis.com/auth/contacts
https://www.googleapis.com/auth/contacts.readonly
https://www.googleapis.com/auth/contacts.other.readonly
https://www.googleapis.com/auth/directory.readonly
https://www.googleapis.com/auth/profile.agerange.read
https://www.googleapis.com/auth/profile.emails.read
https://www.googleapis.com/auth/profile.language.read
https://www.googleapis.com/auth/user.addresses.read
https://www.googleapis.com/auth/user.birthday.read
https://www.googleapis.com/auth/user.emails.read
https://www.googleapis.com/auth/user.gender.read
https://www.googleapis.com/auth/user.organization.read
https://www.googleapis.com/auth/user.phonenumbers.read
https://www.googleapis.com/auth/userinfo.email
https://www.googleapis.com/auth/userinfo.profile
https://www.googleapis.com/auth/profile.language.read

Google.user.getCurrent()

Google.user.getCurrent( { select : Text } ) : Object
Google.user.getCurrent( { select : Collection } ) : Object

Parameters

Parameter	Type		Description
select	Text | Collection	->	Text: A comma-separated list of specific fields that you want to retrieve from each person (e.g., "names, phoneNumbers"). Collection: Collection of the specific fields.
Result	Object	<-	Represents user's details, like names, emails, and phone numbers based on the selected fields.

Description

Google.user.getCurrent() provides information about the authenticated user based on fields specified in select.

Supported fields include addresses, ageRanges, biographies, birthdays, calendarUrls, clientData, coverPhotos, emailAddresses, events, externalIds, genders, imClients, interests, locales, locations, memberships, metadata, miscKeywords, names, nicknames, occupations, organizations, phoneNumbers, photos, relations, sipAddresses, skills, urls, userDefined.

Returned object

The returned user object contains values for the specific field(s).

If no fields have been specified in select, Google.user.getCurrent() returns emailAddresses and names. Otherwise, it returns only the specified field(s).

Permissions

Requires the same OAuth scope package as Google.user.get().

Example

To retrieve information from the current user:

var $google : cs.NetKit.Google
var $oauth2 : cs.NetKit.OAuth2Provider
var $param : Object

// Set up parameters:
$param:={}
$param.name:="google"
$param.permission:="signedIn"
$param.clientId:="your-client-id" // Replace with your Google identity platform client ID
$param.clientSecret:="xxxxxxxxx"
$param.redirectURI:="http://127.0.0.1:50993/authorize/"
$param.scope:=[]
$param.scope.push("https://mail.google.com/")

$param.scope.push("https://www.googleapis.com/auth/contacts")
$param.scope.push("https://www.googleapis.com/auth/contacts.other.readonly")
$param.scope.push("https://www.googleapis.com/auth/contacts.readonly")
$param.scope.push("https://www.googleapis.com/auth/directory.readonly")
$param.scope.push("https://www.googleapis.com/auth/user.addresses.read")
$param.scope.push("https://www.googleapis.com/auth/user.birthday.read")
$param.scope.push("https://www.googleapis.com/auth/user.emails.read")
$param.scope.push("https://www.googleapis.com/auth/user.gender.read")
$param.scope.push("https://www.googleapis.com/auth/user.organization.read")
$param.scope.push("https://www.googleapis.com/auth/user.phonenumbers.read")
$param.scope.push("https://www.googleapis.com/auth/userinfo.email")
$param.scope.push("https://www.googleapis.com/auth/userinfo.profile")


$oauth2:=New OAuth2 provider($param)

$google:=cs.NetKit.Google.new($oauth2)

var $currentUser1:=$google.user.getCurrent()
//without parameters, returns by default "emailAddresses" and "names" 

var $currentUser2:=$google.user.getCurrent("phoneNumbers")
//returns the field "phoneNumbers" 

Google.user.list()

Google.user.list( { options : Object } ) : Object

Parameters

Parameter	Type		Description
options	Object	->	A set of options defining how to retrieve and filter user data
Result	Object	<-	An object containing a structured collection of user data organized into pages

Description

Google.user.list() provides a list of domain profiles or domain contacts in the authenticated user's domain directory.

If the contact sharing or the External Directory sharing is not allowed in the Google admin, the returned users collection is empty.

In options, you can pass the following properties:

Property	Type	Description
select	Text | Collection	Text: A comma-separated list of specific fields that you want to retrieve from each person (e.g., "names, phoneNumbers"). Collection: Collection of the specific fields. If omitted, defaults to returning emailAddresses and names.
sources	Text | Collection	Specifies the directory source to return. Values: - DIRECTORY_SOURCE_TYPE_UNSPECIFIED (Unspecified), - DIRECTORY_SOURCE_TYPE_DOMAIN_CONTACT (Google Workspace domain shared contact), - DIRECTORY_SOURCE_TYPE_DOMAIN_PROFILE (default, Workspace domain profile).
mergeSources	Text | Collection	Adds related data if linked by verified join keys such as email addresses or phone numbers. - DIRECTORY_MERGE_SOURCE_TYPE_UNSPECIFIED (Unspecified), - DIRECTORY_MERGE_SOURCE_TYPE_CONTACT (User owned contact).
top	Integer	Sets the maximum number of people to retrieve per page, between 1 and 1000 (default is 100).

Returned object

The returned object holds a collection of users objects as well as status object properties and functions that allow you to navigate between different pages of results.

Property	Type	Description
users	Collection	A collection of user objects, each containing detailed information about individual users
isLastPage	Boolean	Indicates whether the current page is the last one in the collection of user data.
page	Integer	Represents the current page number of user information, starting from 1. By default, each page contains 100 results, but the page size limit can be adjusted using the top option.
next()	Function	A function that retrieves the next page of user information. Returns True if successful; otherwise, returns False if there is no next page and the users collection is not updated.
previous()	Function	A function that retrieves the previous page of user information. Returns True if successful; otherwise, returns False if there is no previous page and the users collection is not updated.
success	Boolean	see Status object
statusText	Text	see Status object
errors	Collection	see Status object

Permissions

Requires the same OAuth scope package as Google.user.get().

Example

To retrieve user data in a structured collection organized into pages with a maximum of top users per page:

var $google : cs.NetKit.Google
var $oauth2 : cs.NetKit.OAuth2Provider
var $param : Object

$param:={}
$param.name:="google"
$param.permission:="signedIn"
$param.clientId:="your-client-id" // Replace with your Google identity platform client ID
$param.clientSecret:="xxxxxxxxx"
$param.redirectURI:="http://127.0.0.1:50993/authorize/"
$param.scope:=[]
$param.scope.push("https://mail.google.com/")

$param.scope.push("https://www.googleapis.com/auth/contacts")
$param.scope.push("https://www.googleapis.com/auth/contacts.other.readonly")
$param.scope.push("https://www.googleapis.com/auth/contacts.readonly")
$param.scope.push("https://www.googleapis.com/auth/directory.readonly")
$param.scope.push("https://www.googleapis.com/auth/user.addresses.read")
$param.scope.push("https://www.googleapis.com/auth/user.birthday.read")
$param.scope.push("https://www.googleapis.com/auth/user.emails.read")
$param.scope.push("https://www.googleapis.com/auth/user.gender.read")
$param.scope.push("https://www.googleapis.com/auth/user.organization.read")
$param.scope.push("https://www.googleapis.com/auth/user.phonenumbers.read")
$param.scope.push("https://www.googleapis.com/auth/userinfo.email")
$param.scope.push("https://www.googleapis.com/auth/userinfo.profile")


$oauth2:=New OAuth2 provider($param)

$google:=cs.NetKit.Google.new($oauth2)

var $userList:=$google.user.list({top:10})

labelInfo object

Several Google.mail label management methods use a labelInfo object, containing the following properties:

Property	Type	Description
id	Text	The ID of the label.
name	Text	The display name of the label. (mandatory)
messageListVisibility	Text	The visibility of messages with this label in the message list. Can be: - "show": Show the label in the message list. < - "hide": Do not show the label in the message list.
labelListVisibility	Text	The visibility of the label in the label list. Can be: - "labelShow": Show the label in the label list. - "labelShowIfUnread" : Show the label if there are any unread messages with that label. - "labelHide": Do not show the label in the label list.
color	Object	The color to assign to the label (color is only available for labels that have their type set to user). The color object has 2 attributes : - textColor: text: The text color of the label, represented as hex string. This field is required in order to set the color of a label. - backgroundColor: text: The background color represented as hex string #RRGGBB (ex for black: #000000). This field is required in order to set the color of a label.
type	Text	The owner type for the label. Can be: - "system": Labels created by Gmail. - "user": Custom labels created by the user or application. System labels are internally created and cannot be added, modified, or deleted. They're may be able to be applied to or removed from messages and threads under some circumstances but this is not guaranteed. For example, users can apply and remove the INBOX and UNREAD labels from messages and threads, but cannot apply or remove the DRAFTS or SENT labels from messages or threads. User labels are created by the user and can be modified and deleted by the user and can be applied to any message or thread.

Status object (Google class)

Several Google.mail functions return a status object, containing the following properties:

Property	Type	Description
success	Boolean	True if the operation was successful
statusText	Text	Status message returned by the Gmail server or last error returned by the 4D error stack
errors	Collection	Collection of 4D error items (not returned if a Gmail server response is received): - [].errcode is the 4D error code number - [].message is a description of the 4D error - [].componentSignature is the signature of the internal component that returned the error

Basically, you can test the success and statusText properties of this object to know if the function was correctly executed.

Some functions adds specific properties to the status object, properties are described with the functions.

Tutorials

Authenticate to the Microsoft Graph API in service mode

Objectives

Establish a connection to the Microsoft Graph API in service mode.

Prerequisites

• You have registered an application with the Microsoft identity platform and obtained your application ID (also called client ID) and client secret.

Here, the term "application" does not refer to an application built in 4D. It refers to an entry point you create on the Azure portal. You use the generated client ID to tell your 4D application to trust the Microsoft identity platform.

Steps

Once you have your client ID and client secret, you're ready to establish a connection to your Azure application.

1. Open your 4D application, create a method and insert the following code:

var $oAuth2 : cs.NetKit.OAuth2Provider
var $office365 : cs.NetKit.Office365

var $credential:={}
$credential.name:="Microsoft"
$credential.permission:="service"

$credential.clientId:="your-client-id" //Replace with your Microsoft identity platform client ID
$credential.clientSecret:="your-client-secret" //Replace with your client secret
$credential.tenant:="your-tenant-id" // Replace with your tenant ID
$credential.scope:="https://graph.microsoft.com/.default"

$oAuth2:=New OAuth2 provider($credential)

$office365:=$cs.NetKit.Office365.new($oAuth2; {mailType: "MIME"})
// In service mode, you need to indicate on behalf of which user you are sending the request:
$office365.mail.userId:="MyUserPrincipalName"
// Get mails of MyUserPrincipalName account
$mailList:=$office365.mail.getMails()

2. Execute the method to establish the connection.

(Archived) Authenticate to the Microsoft Graph API in signedIn mode and send an email with SMTP

This tutorial has been archived. We recommend using the Office365.mail.send() method to send emails.

Objectives

Establish a connection to the Microsoft Graph API in signedIn mode, and send an email using the SMTP Transporter class.

In this example, we get access on behalf of a user.

Prerequisites

• You have registered an application with the Microsoft identity platform and obtained your application ID (also called client ID).

Here, the term "application" does not refer to an application built in 4D. It refers to an entry point you create on the Azure portal. You use the generated client ID to tell your 4D application to trust the Microsoft identity platform.

• You have a Microsoft e-mail account. For example, you signed up for an e-mail account with Microsoft's webmail services designated domains (@hotmail.com, @outlook.com, etc.).

Steps

Once you have your client ID, you're ready to establish a connection to your Azure application and send an email:

1. Open your 4D application, create a method and insert the following code:

var $token; $param; $email : Object
var $oAuth2 : cs.NetKit.OAuth2Provider
var $address : Text

// Configure authentication


$param:=New object
$param.name:="Microsoft"
$param.permission:="signedIn"
$param.clientId:="your-client-id" // Replace with your Microsoft identity platform client ID
$param.redirectURI:="http://127.0.0.1:50993/authorize/"
$param.scope:="https://outlook.office.com/SMTP.Send" // Get consent for sending an smtp email

// Instantiate an object of the OAuth2Provider class
$oAuth2:=New OAuth2 provider($param)

// Request a token using the class function

// Send a token request and start the a web server on the port specified in $param.redirectURI
//to intercept the authorization response
$token:=$oAuth2.getToken()

// Set the email address for SMTP configuration
$address:= "email-sender-address@outlook.fr" // Replace with your Microsoft email account address

// Set the email's content and metadata
$email:=New object
$email.subject:="My first mail"
$email.from:=$address
$email.to:="email-recipient-address@outlook.fr" // Replace with the recipient's email address
$email.textBody:="Test mail \r\n This is just a test e-mail \r\n Please ignore it"

// Configure the SMTP connection
$parameters:=New object
$parameters.accessTokenOAuth2:=$token

$parameters.authenticationMode:=SMTP authentication OAUTH2
$parameters.host:="smtp.office365.com"
$parameters.user:=$address

// Send the email

$smtp:=SMTP New transporter($parameters)
$statusSend:=$smtp.send($email)

2. Execute the method. Your browser opens a page that allows you to authenticate.

3. Log in to your Microsoft Outlook account and check that you've received the email.

Copyrights

(c) Microsoft, Microsoft Office, Microsoft 365, Microsoft Graph are trademarks of the Microsoft group of companies.

(c) Google, Gmail are trademarks of the Alphabet, Inc.