V0.2.2 Cura 5.4

Update For Cura 5.4

V0.2.2

• Add Translation
• Update for 5.4

UniversalCuraSettings-2023-09-18.curapackage -> Cura 4.10-Cura 5.4

Drop the curapackage in the 3d viewport in Cura as if you were opening a 3d model. You will then be prompted to restart Cura.

V0.1.11 Cura 5.2

Update For Cura 5.2

V0.1.10 & V0.1.11

• Reset General Settings option on model change
• Possibility to specify Nozzle Size 0.3,0.5,0.7

UniversalCuraSettings-2022-11-29T21_48_36Z.curapackage -> Cura 4.10-Cura 5.2

Drop the curapackage according in the 3d viewport in Cura as if you were opening a 3d model. You will then be prompted to restart Cura.

V0.1.10 Cura 5.0

Update For Cura 5.2

Bug correction

UniversalCuraSettings-2022-11-15T22_23_03Z.curapackage -> Cura 4.10-Cura 5.2

Drop the curapackage according in the 3d viewport in Cura as if you were opening a 3d model. You will then be prompted to restart Cura.

V1.0.7 Cura 5.X

Update For Cura 5.1
Add new intent profile : Small Details

UniversalCuraSettings-v8.0.0-2022-09-15T09_41_55Z.curapackage -> Cura 5.0-Cura 5.1
UniversalCuraSettings-v7.0.0-2022-09-15T09_41_55Z.curapackage -> Cura 4.10-Cura 4.13

Drop the curapackage according to your Cura release in the 3d viewport in Cura as if you were opening a 3d model. You will then be prompted to restart Cura.

V0.1.5 Cura 5.0

Update For Cura 5.0
Add new option : Set Standard Settings ( Not checked the gloabl settings are not applied to your profile)
Add link via small button to the Wiki page concerning the settings

UniversalCuraSettings-v8.0.0-2022-05-20T12_45_37Z.curapackage -> Cura 5.0
UniversalCuraSettings-v7.9.0-2022-05-20T12_45_37Z.curapackage-> Cura 4.10-Cura 4.13

Drop the curapackage according to your Cura release in the 3d viewport in Cura as if you were opening a 3d model. You will then be prompted to restart Cura.

V0.1.1 Cura 5.0

Update For Cura 5.0
Not fully tested

UniversalCuraSettings-v8.0.0-2022-05-15T14_23_37Z.curapackage -> Cura 5.0
UniversalCuraSettings-v7.9.0-2022-05-15T14_23_37Z.curapackage-> Cura 4.10-Cura 4.13

Drop the curapackage according to your Cura release in the 3d viewport in Cura as if you were opening a 3d model. You will then be prompted to restart Cura.

V0.0.18 Cura 4.12 / 4.13

Minor Modification on Support Intent
New Save Material Intent settings

V0.0.17 Cura 4.12

Modification of parameters and correction in the default position of the Parameters Dialog Box.

#25

V0.0.15 Cura 4.12

Can define Material as unknow
Can define Extruder mode as unknow

In this case material and retracttion are not modified

V0.0.12 Cura 4.11

Monotonic modification
Cura 4.11