STATUX

Statux is a Python library for Linux that provides methods to get hardware and system information. Useful for monitoring tasks.

Battery

Method	Returns
battery_info()	Manufacturer, model and s/n
status()	Full, Charging or Discharging
is_present()	True if battery is present
voltage()	battery voltage (mV)
current()	battery current (mA)
energy()	battery energy (mWh)
power()	battery power (mW)
charge()	battery charge (mAh)
capacity()	current capacity percent
capacity_level()	Full, Normal, Low or Critical
low_level()	value set for low battery level
critical_level()	value set for critical level
action_level()	value set for critical action
critical_power_action()	PowerOff, Hibernate or HybridSleep
remaining_time()	Remaining battery life
wear_level()	Battery health level
technology()	Chemistry of battery
supply_type()	Battery, Mains, UPS, etc
lid_state()	Open or Close
ac_adapter_online()	True if AC adapter is online

CPU

Method	Returns
next_value()	CPU Load percentage. Note: Needs to instantiate Load() class
logical_cpus()	Number of logical processors
physical_cpus()	Number of physical processor
frequency()	Current CPU frequency
max_frequency()	CPU max frequency
frequency_percent()	Current CPU frequency percent
is_x86_64()	True if CPU is AMD64 or Intel64 i.e. 64 bit capable
model_name()	CPU model name

DISKS

Method	Returns
block_devices()	sda, sdb, nvmen1, hda, hdb, etc
partitions()	sda1,sda2, sdb1, nvmen1p1, hda1, hdb2, etc
is_rotational()	If block device is rotational
is_removable()	If block device is removable
model()	Model name of the given device (sda, hdb..)
disk_naming()	a namedtuple with persistent names of a disk or a partition (id, label, path, uuid partlabel and partuuid)
mounts_info()	A dict with mounted partitions as key and a namedtuple with mount point, filesystem and mount options as value
mounted_partitions()	mounted partitions and mount points
total_size()	Total size of a partition
free_space()	Free space of a partition
used_space()	Used space of a partition
used_space_percent()	Used space percent of a partition
bytes_read()	Bytes read in a partition
bytes_write()	Bytes written in a partition
bytes_read_write()	Bytes read and wirtten in a partition
bytes_read_write_multi()	Bytes read and writen in several partitions

NETWORK

Method	Returns
get_interfaces()	All network interfaces
get_address()	MAC address os a interface
get_state()	Operational state of a interface
download_bytes()	total bytes downloaded in a interface
upload_bytes()	total bytes uploaded in a interface
down_up_bytes()	total bytes up-downloaded in a interface
download_bytes()	average download speed per second
upload_speed()	average download speed per second
down_up_speed()	average up-download speed per second

RAM

Method	Returns
total()	Total RAM size
free()	Free RAM
free_percent()	Free RAM percent
available()	Available RAM
available_percent()	Available RAM percent
buff_cache()	Buffer, cached and slab memory
used()	Used RAM
used_percent()	Used RAM percent

SYSTEM

Method	Returns
boot_time()	Time at which the system booted
uptime()	Time elapsed since system boot time
init()	Init system name
hostame()	Hostname
user()	User name
display_protocol()	Display protocol (x11 or wayland)
kernel_release()	Kernel release
kernel version()	Kernel version
architecture()	Machine type
session_id()	Current session id
distro_name()	Distro short name
distro_full_name()	Full distro description
distro_version()	Distro version
distro_url()	Distro url
linux_distribution()	Distro info (id, version, codename)

TEMP

Method	Returns
cores()	temperature of each core
cpu()	CPU temp
max_val()	maximum value of the temp sensors obtained

Note:

These methods are based on the proc and sys filesystems and are tested in Linux 4.15. It is possible that some methods are not available in previous kernel versions

Install:

By pip (It may not be the latest version):

pip install statux

Cloning this repo :

git clone https://github.com/Arg0s1080/statux.git
cd statux
sudo python3 setup.py install