Skip to content

This template contains customizable services for building video platforms and content management with Axinom Mosaic.

License

Notifications You must be signed in to change notification settings

Axinom/mosaic-media-template

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Mosaic Media Template Solution

About the Package

This package is part of the Axinom Mosaic development platform. More information can be found at https://portal.axinom.com/mosaic.

License

This mono-repo and all packages contained within it are licensed under the MIT License. Check the LICENSE file for more details.

Introduction

This repository contains the customizable parts of an Axinom Mosaic solution. The code included in that repository can be either used as is or customized to your specific requirements. The Mosaic libraries and services used by that solution will be provided, updated and maintained by Axinom.

Getting Started

To get started with developing your own customized solution based on the Mosaic Media Template, run the following command:

npx -p @axinom/mosaic-cli mosaic create

This process will guide you through the creation of a new Mosaic project based on the Mosaic Media Template.
See the CLI documentation for more details.

Prerequisites

Before using the customizable solution make sure that you have the following software installed:

This solution comes with a 'dockerized' infrastructure for local development. It consists of PostgreSQL and pgAdmin. To start/stop the infrastructure run yarn infra:up and yarn infra:down accordingly. See Prepare the solution section below for additional info on how to start the development infrastructure.

Note for Windows users

You need to configure Docker for Windows to use Linux containers, see Docker documentation.

Note for Linux users

For a better development experience i.e. being able to run docker commands without sudo, please see Docker post-installation steps for Linux.

Prepare and connect the media-template solution

⚠️ This section is describing the steps on how to setup the solution for development purpose. If you're interested in how to prepare the services for production use please continue reading here.

  1. Run yarn to install all package dependencies for the workspace.

  2. Run yarn apply-templates to create local copies of all *.template files in the solution.

  3. Run yarn infra:up to start the development infrastructure.

  4. Run yarn db:reset to create the databases for all services in the solution.

  5. Set the following parameters in the root .env that are specific to your development environment:

    • TENANT_ID
    • ENVIRONMENT_ID
    • RABBITMQ_VHOST
    • RABBITMQ_USER
    • RABBITMQ_PASSWORD
    • DEV_SERVICE_ACCOUNT_CLIENT_ID
    • DEV_SERVICE_ACCOUNT_CLIENT_SECRET

    You will get these values from the 'Environment Connection' station on the Environment Administration Portal. For a description of how to create a new environment and getting the required connection values, please follow the steps described here.

  6. Run yarn setup to initialize all the services in the solution.

Run the solution

⚠️ This section is describing the steps on how to run the solution for development purpose. If you're interested in how to prepare the services for production use please continue reading here.

Start the following commands in parallel (in separate terminals):

  1. Run yarn dev:libs to start the compilation for the media-messages package in watch mode. Wait until this finishes before proceeding to avoid concurrency issues.
  2. Run yarn dev:services to start the media-service, catalog-service, and entitlement-service in watch mode.`
  3. Run yarn dev:workflows to start the media-workflows in watch mode.
  4. Open http://localhost:10053/ in your browser. You should see a grid with different workflow options (Movies, Videos, Images, TV shows, Seasons, Episodes).

Alternatively, use the "...:all" scripts to include also the channel-service and the vod-to-live-service.

Run tests

Note that these steps take several minutes to complete.

  1. Run yarn test:reset:dbs to initialize the testing databases.
  2. Run yarn test to run the unit tests of the solution.

Prepare the developer environment and get connection values

Before running the solution you need to create a Mosaic development environment. In order to do this, go over to https://admin.service.eu.axinom.com and login using the tenant id, username and password provided to you by Axinom.

After successful login, please select the "Environments" tile and then click the '+'-Icon to create a new environment.

Provide a user name and select the "Development" template.

The template will automatically create a management user on environment creation. You can adjust the email and password for that user in the text boxes below the template selection. By default it will match the email address of your Environment Administration user.

The 'Management System Subdomain' is the subdomain under which the management system will be publicly available. For development the management system will primarily be used from 'localhost', so this value is not too important for now and is also possible to be changed later still.

After hitting 'Proceed', the environment will be created and the 'Environment Connection' screen will show up. You can use this screen to retrieve all the information you need for connecting the media-template solution to the created environment.

Package the services for production use

The steps described above define how to setup and run the services on a local development machine. In order to run the services on a server the following procedure should be used.

Generate a production build and docker image of the backend service

The solution comes with a ready-to-use Dockerfile at its root. It requires two ARGs getting passed in:

  • PACKAGE_ROOT - needs to be set to the relative path of the service that should be build. This is usually services/{serviceName}/service (e.g. services/media/service)
  • PACKAGE_BUILD_COMMAND - needs to be set to the npm command that should be used to build the service. THis command needs to be defined on the root package.json. It is usually build:{serviceName}-service:prod (e.g. build:media-service:prod)

The process will then use the service's build script to create a production build of the service and the start script to spin up the server, once the Docker container starts up.

When running the Docker image, please make sure that you provide the expected environment variables to the container, as on a production build it will not use the .env files.

Generate the workflows package

To generate a production build of a workflow package run the following command:

yarn build:{serviceName}-workflows:prod

This script will create a .tgz file on the repository root containing the packaged workflows.

To deploy the workflows into an environment run a command like:

yarn run pilet publish --no-fresh --url "https://frontends.service.eu.axinom.net/v1/pilets/{tenantId}/{environmentId}" --api-key "{serviceAccountCredentials}" {packageFile}

Please note, that you need to provide the 'Base64 Encoded Credentials' of a service account that has the Pilets: Publish permissions as api-key. This value will be shown to you alongside with the other secrets when creating a service account or when generating new secrets for an existing account.

Also make sure that you define all values the pilet expects to receive inside the app.meta.custom by providing them as additional parameters on this command like:

--fields.{key} {value}

You can find these keys and values usually in the .env.template file of the workflow.

Unpublishing a workflow package

If you want to unpublish a previously published workflow package from the Mosaic Micro Frontend Service, the following CLI command provided by the Mosaic CLI can be used. The Service Account used to create the api-key must have Pilets: Delete permission assigned.

yarn mosaic unpublish-pilet -t {tenantId} -e {environmentId} -a {api-key} -n {pilet-name} -m {micro-frontend-service-base-url}

Deploying the services via Mosaic Hosting Service

If you're looking for a quick way to deploy a service in the Axinom Cloud, we offer a Quick Deploy interactive script in the root package.

If you're looking to deploy your customized service in the Axinom Cloud using your CI/CD pipelines, we recommend the Advanced Deploy option that uses the Mosaic CLI where you can control the deployment steps with more precision via the supplied arguments.

A detailed guide on how to deploy services via Mosaic Hosting Service can be found at https://portal.axinom.com/mosaic/documentation/deploy-a-customized-service-with-hosting-service

Quick Deploy

  1. Ensure you've configured the Container Registry for your environment in the Admin Portal under Hosting Service.
  2. Ensure you've run yarn setup:hosting from the root of the mosaic-media-template. This will setup the required service-account for the quick-deploy script.
  3. From the root of the mosaic-media-template, run yarn quick-deploy and follow the on-screen instructions.

Advanced Deploy (using the Mosaic CLI)

The following sections list the individual steps needed to Build & Deploy the customizable services from your CI/CD pipelines.

Note that the following pre-requisites are assumed:

  1. You've configured the Container Registry for your environment in the Admin Portal under Hosting Service.

  2. For each service you wish to host in the Axinom Cloud, you've created a Customized Service entity via the Admin Portal, and that the correct repository name has been set as expected.

  3. You've run yarn setup:hosting from the root of the mosaic-media-template. This will setup the required service-account for using the Mosaic CLI commands shown below with the correct permissions.

    NOTE: yarn util:load-vars is used in the below commands to load values for certain CLI arguments from the .env file. If required, the CLI arguments can also be directly provided as necessary.

    NOTE: The final deployment step (i.e. the mosaic hosting service deploy step) can also be performed via the Admin Portal under Hosting Service.

Deploy Media Service

  1. Build the service using the provided Dockerfile
    • CLI Command
      • docker build -t <username>/<repository_name>:<tag> --build-arg PACKAGE_ROOT=services/media/service --build-arg PACKAGE_BUILD_COMMAND=build:media-service:prod .
      • i.e. docker build -t my-user/media-service:20230927.1 --build-arg PACKAGE_ROOT=services/media/service --build-arg PACKAGE_BUILD_COMMAND=build:media-service:prod .
    • Ensure to use the same <repository_name> you decide on here, also in the Customized Service details station of the Admin Portal.
  2. Push the container image to Docker Hub
    • CLI Command
      • docker push <dockerhub_username>/<repository_name>:<tag>
      • i.e. docker push my-user/media-service:20230927.1
  3. Build the workflows of the media-service
    • CLI Command
      • yarn build:media-workflows:prod
    • This will produce a .tgz pilet artifact on the project root
  4. Register the pilet artifact on the Mosaic Hosting Service
    • CLI Command
      • yarn util:load-vars mosaic hosting pilet register -i <custom-service-id> -p <path-to-workflow-build-artifact>
      • i.e. yarn util:load-vars mosaic hosting pilet register -i media-service -p ./
  5. Upload the deployment manifest to the Mosaic Hosting Service
    • CLI Command
      • yarn util:load-vars mosaic hosting manifest upload -i <custom-service-id> -p <path-to-deployment-manifest-yaml> -n <manifest-name>
      • i.e. yarn util:load-vars mosaic hosting manifest upload -i media-service -p ./services/media/service/mosaic-hosting-deployment-manifest.yaml -n media-service-manifest-20230927
    • Ensure you provide a unique value for the <manifest-name>
  6. Deploy the service with the specific artifacts (i.e. container image tag, pilet artifact, deployment manifest)
    • CLI Command
      • yarn util:load-vars mosaic hosting service deploy -i <custom-service-id> -t <tag> -p <workflow-package@version> -m <manifest-name> -n <deployment-name>
      • i.e. yarn util:load-vars mosaic hosting service deploy -i media-service -t 20230927.1 -p media-workflows@1.0.1 -m media-service-manifest-20230927 -n media-service-deployment-20230927.1
    • Ensure you provide a unique value for the <deployment-name>

Deploy Catalog Service

  1. Build the service using the provided Dockerfile
    • CLI Command
      • docker build -t <username>/<repository_name>:<tag> --build-arg PACKAGE_ROOT=services/catalog/service --build-arg PACKAGE_BUILD_COMMAND=build:catalog-service:prod .
      • i.e. docker build -t my-user/catalog-service:20230927.1 --build-arg PACKAGE_ROOT=services/catalog/service --build-arg PACKAGE_BUILD_COMMAND=build:catalog-service:prod .
    • Ensure to use the same <repository_name> you decide on here, also in the Customized Service details station of the Admin Portal.
  2. Push the container image to Docker Hub
    • CLI Command
      • docker push <dockerhub_username>/<repository_name>:<tag>
      • i.e. docker push my-user/catalog-service:20230927.1
  3. Since this service has no workflows, we do not need to build them nor register them
  4. Upload the deployment manifest to the Mosaic Hosting Service
    • CLI Command
      • yarn util:load-vars mosaic hosting manifest upload -i <custom-service-id> -p <path-to-deployment-manifest-yaml> -n <manifest-name>
      • i.e. yarn util:load-vars mosaic hosting manifest upload -i catalog-service -p ./services/catalog/service/mosaic-hosting-deployment-manifest.yaml -n catalog-service-manifest-20230927
    • Ensure you provide a unique value for the <manifest-name>
  5. Deploy the service with the specific artifacts (i.e. container image tag, deployment manifest)
    • CLI Command
      • yarn util:load-vars mosaic hosting service deploy -i <custom-service-id> -t <tag> -m <manifest-name> -n <deployment-name>
      • i.e. yarn util:load-vars mosaic hosting service deploy -i catalog-service -t 20230927.1 -m catalog-service-manifest-20230927 -n catalog-service-deployment-20230927.1
    • Ensure you provide a unique value for the <deployment-name>

Deploy Entitlement Service

  1. Build the service using the provided Dockerfile
    • CLI Command
      • docker build -t <username>/<repository_name>:<tag> --build-arg PACKAGE_ROOT=services/entitlement/service --build-arg PACKAGE_BUILD_COMMAND=build:entitlement-service:prod .
      • i.e. docker build -t my-user/entitlement-service:20230927.1 --build-arg PACKAGE_ROOT=services/entitlement/service --build-arg PACKAGE_BUILD_COMMAND=build:entitlement-service:prod .
    • Ensure to use the same <repository_name> you decide on here, also in the Customized Service details station of the Admin Portal.
  2. Push the container image to Docker Hub
    • CLI Command
      • docker push <dockerhub_username>/<repository_name>:<tag>
      • i.e. docker push my-user/entitlement-service:20230927.1
  3. Since this service has no workflows, we do not need to build them nor register them
  4. Upload the deployment manifest to the Mosaic Hosting Service
    • CLI Command
      • yarn util:load-vars mosaic hosting manifest upload -i <custom-service-id> -p <path-to-deployment-manifest-yaml> -n <manifest-name>
      • i.e. yarn util:load-vars mosaic hosting manifest upload -i entitlement-service -p ./services/entitlement/service/mosaic-hosting-deployment-manifest.yaml -n entitlement-service-manifest-20230927
    • Ensure you provide a unique value for the <manifest-name>
    • IMPORTANT: The entitlement-service requires certain environment variables to be configured that are user specific (i.e. GEOLITE & DRM Keys). Therefore ensure that you've followed the necessary steps to retrieve these values and have updated the deployment manifest YAML with the correct values.
  5. Deploy the service with the specific artifacts (i.e. container image tag, deployment manifest)
    • CLI Command
      • yarn util:load-vars mosaic hosting service deploy -i <custom-service-id> -t <tag> -m <manifest-name> -n <deployment-name>
      • i.e. yarn util:load-vars mosaic hosting service deploy -i entitlement-service -t 20230927.1 -m entitlement-service-manifest-20230927 -n entitlement-service-deployment-20230927.1
    • Ensure you provide a unique value for the <deployment-name>

Deploy channel Service

  1. Build the service using the provided Dockerfile
    • CLI Command
      • docker build -t <username>/<repository_name>:<tag> --build-arg PACKAGE_ROOT=services/channel/service --build-arg PACKAGE_BUILD_COMMAND=build:channel-service:prod .
      • i.e. docker build -t my-user/channel-service:20230927.1 --build-arg PACKAGE_ROOT=services/channel/service --build-arg PACKAGE_BUILD_COMMAND=build:channel-service:prod .
    • Ensure to use the same <repository_name> you decide on here, also in the Customized Service details station of the Admin Portal.
  2. Push the container image to Docker Hub
    • CLI Command
      • docker push <dockerhub_username>/<repository_name>:<tag>
      • i.e. docker push my-user/channel-service:20230927.1
  3. Build the workflows of the channel-service
    • CLI Command
      • yarn build:channel-workflows:prod
    • This will produce a .tgz pilet artifact on the project root
  4. Register the pilet artifact on the Mosaic Hosting Service
    • CLI Command
      • yarn util:load-vars mosaic hosting pilet register -i <custom-service-id> -p <path-to-workflow-build-artifact>
      • i.e. yarn util:load-vars mosaic hosting pilet register -i channel-service -p ./
  5. Upload the deployment manifest to the Mosaic Hosting Service
    • CLI Command
      • yarn util:load-vars mosaic hosting manifest upload -i <custom-service-id> -p <path-to-deployment-manifest-yaml> -n <manifest-name>
      • i.e. yarn util:load-vars mosaic hosting manifest upload -i channel-service -p ./services/channel/service/mosaic-hosting-deployment-manifest.yaml -n channel-service-manifest-20230927
    • Ensure you provide a unique value for the <manifest-name>
  6. Deploy the service with the specific artifacts (i.e. container image tag, pilet artifact, deployment manifest)
    • CLI Command
      • yarn util:load-vars mosaic hosting service deploy -i <custom-service-id> -t <tag> -p <workflow-package@version> -m <manifest-name> -n <deployment-name>
      • i.e. yarn util:load-vars mosaic hosting service deploy -i channel-service -t 20230927.1 -p channel-workflows@1.0.1 -m channel-service-manifest-20230927 -n channel-service-deployment-20230927.1
    • Ensure you provide a unique value for the <deployment-name>

Development notes

  • zapatos models will be generated after yarn db:commit but you can trigger the generator manually via yarn internal:zapatos.
  • Run yarn test:reset:dbs before running yarn test in case new test files were created or existing ones renamed or moved.
  • To obtain a development-time auth token for a service, run yarn util:token in that service's workspace. There should also be a corresponding permissions file under that service's scripts/resources. For a working example see package.json in the Media Service.

About

This template contains customizable services for building video platforms and content management with Axinom Mosaic.

Resources

License

Code of conduct

Stars

Watchers

Forks