An RN4871 based usb dongle. The usb interface is implemented by a CP2102N USB-to-UART device.
- Bluetooth 5 Certified
- Easy to use ASCII command interface
- Module certified for use in USA, Canada, Brazil, Europe, Japan, Korea, Taiwan and China
- Supports LE Secure Connections levels 1-3
- Supports up to 151 byte payloads with Data Length Extensions
- Scripting features to allow for operation without a host microcontroller
- White list for determining connections
- MLDP compatibility with RN4020
- Remote configuration capability
- RX Sensitivity: -90 dBm
- TX Power: 0 dBm
- RSSI Monitor
| Pin Number | Pin | Column C |
|---|---|---|
| 1 | P0_2 | AD2,LED0: Provides indication whether the module is in On/Off mode. |
| 2 | P1_2 | GPIO; default: Input; pulled high,AD10; I2C SCL pin |
| 3 | P1_3 | GPIO; default: Input; pulled high,AD11; I2C SDA pin |
| 4 | P1_6 | Configurable pin |
| 5 | P1_7 | Configurable pin |
| 6 | P2_0 | System configuration input; 1: Application mode 0: Test mode/Flash update/EEPROM configuration Default: Input; pulled high. |
| 7 | P2_7 | UART_TX_IND output pin. Provides indication if RN4870 is transmitting to host MCU over UART. Pulled low before UART TX begins and pulled high after UART TX is over |
| 8 | +5 Volts | Connected to the Usb Vbus |
| 9 | Ground | COnnected to Usb Ground |