Fix typing mistake

BEEmod · Oct 9, 2017 · 825c206 · 825c206
1 parent 563eaed
commit 825c206
Show file tree

Hide file tree

Showing 6 changed files with 18 additions and 18 deletions.
diff --git a/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler/vbsp_config.cfg b/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler/vbsp_config.cfg
@@ -112,7 +112,7 @@
 
 		"Condition"
 			{
-			"BlockType" //    This goes for the Right side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Right side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 1 1" //    X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" //     The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -144,7 +144,7 @@
 		}	
 		"Condition" 
 			{
-			"BlockType" //    This goes for the Left side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Left side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 -1 1" //    X, Y, and Z Axis order - The offset is in block increments, with 0 0 0 equal to the mounting.
 				"Type" "VOID AIR PIT GOO" //    The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -177,7 +177,7 @@
 
 		"Condition"
 			{
-			"BlockType" // This goes for the Right side. If the pillar is within a block a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
+			"BlockType" // This goes for the Right side. If the pillar is within a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
 				{
 				"Offset" "0 1 1" // X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" // The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).

diff --git a/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_50s/vbsp_config.cfg b/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_50s/vbsp_config.cfg
@@ -75,7 +75,7 @@
 
 		"Condition"
 			{
-			"BlockType" //    This goes for the Right side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Right side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 1 1" //    X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" //     The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -107,7 +107,7 @@
 		}	
 		"Condition" 
 			{
-			"BlockType" //    This goes for the Left side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Left side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 -1 1" //    X, Y, and Z Axis order - The offset is in block increments, with 0 0 0 equal to the mounting.
 				"Type" "VOID AIR PIT GOO" //    The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -140,7 +140,7 @@
 
 		"Condition"
 			{
-			"BlockType" // This goes for the Right side. If the pillar is within a block a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
+			"BlockType" // This goes for the Right side. If the pillar is within a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
 				{
 				"Offset" "0 1 1" // X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" // The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).

diff --git a/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_80s/vbsp_config.cfg b/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_80s/vbsp_config.cfg
@@ -75,7 +75,7 @@
 
 		"Condition"
 			{
-			"BlockType" //    This goes for the Right side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Right side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 1 1" //    X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" //     The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -107,7 +107,7 @@
 		}	
 		"Condition" 
 			{
-			"BlockType" //    This goes for the Left side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Left side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 -1 1" //    X, Y, and Z Axis order - The offset is in block increments, with 0 0 0 equal to the mounting.
 				"Type" "VOID AIR PIT GOO" //    The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -140,7 +140,7 @@
 
 		"Condition"
 			{
-			"BlockType" // This goes for the Right side. If the pillar is within a block a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
+			"BlockType" // This goes for the Right side. If the pillar is within a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
 				{
 				"Offset" "0 1 1" // X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" // The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).

diff --git a/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_bts/vbsp_config.cfg b/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_bts/vbsp_config.cfg
@@ -106,7 +106,7 @@
 
 		"Condition"
 			{
-			"BlockType" //    This goes for the Right side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Right side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 1 1" //    X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" //     The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -138,7 +138,7 @@
 		}	
 		"Condition" 
 			{
-			"BlockType" //    This goes for the Left side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Left side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 -1 1" //    X, Y, and Z Axis order - The offset is in block increments, with 0 0 0 equal to the mounting.
 				"Type" "VOID AIR PIT GOO" //    The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -171,7 +171,7 @@
 
 		"Condition"
 			{
-			"BlockType" // This goes for the Right side. If the pillar is within a block a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
+			"BlockType" // This goes for the Right side. If the pillar is within a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
 				{
 				"Offset" "0 1 1" // X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" // The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).

diff --git a/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_over/vbsp_config.cfg b/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_over/vbsp_config.cfg
@@ -112,7 +112,7 @@
 
 		"Condition"
 			{
-			"BlockType" //    This goes for the Right side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Right side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 1 1" //    X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" //     The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -144,7 +144,7 @@
 		}	
 		"Condition" 
 			{
-			"BlockType" //    This goes for the Left side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Left side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 -1 1" //    X, Y, and Z Axis order - The offset is in block increments, with 0 0 0 equal to the mounting.
 				"Type" "VOID AIR PIT GOO" //    The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -177,7 +177,7 @@
 
 		"Condition"
 			{
-			"BlockType" // This goes for the Right side. If the pillar is within a block a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
+			"BlockType" // This goes for the Right side. If the pillar is within a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
 				{
 				"Offset" "0 1 1" // X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" // The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).

diff --git a/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_p1/vbsp_config.cfg b/packages/Lautaro/standing_reclined_fizzlers/items/standing_fizzler_p1/vbsp_config.cfg
@@ -75,7 +75,7 @@
 
 		"Condition"
 			{
-			"BlockType" //    This goes for the Right side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Right side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 1 1" //    X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" //     The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -107,7 +107,7 @@
 		}	
 		"Condition" 
 			{
-			"BlockType" //    This goes for the Left side. If the pillar is within a block a block, don't generate a gridded surface for the lower part of the pillar.
+			"BlockType" //    This goes for the Left side. If the pillar is within a block, don't generate a gridded surface for the lower part of the pillar.
 				{
 				"Offset" "0 -1 1" //    X, Y, and Z Axis order - The offset is in block increments, with 0 0 0 equal to the mounting.
 				"Type" "VOID AIR PIT GOO" //    The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).
@@ -140,7 +140,7 @@
 
 		"Condition"
 			{
-			"BlockType" // This goes for the Right side. If the pillar is within a block a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
+			"BlockType" // This goes for the Right side. If the pillar is within a block, don't add the "pos" and "pos_lower" visgroup brushes, also don´t generate a 4x4 gridded surface on the embeded wall where the lower part of the pillar would be attached.
 				{
 				"Offset" "0 1 1" // X, Y, and Z Axis order.
 				"Type" "VOID AIR PIT GOO" // The exeption´s list where the visgroup brush must be generated (See https://github.com/BEEmod/BEE2-items/wiki/vbsp_config_conditions#blocktype).