Introduction

This is a fork of the awesome Ethernet stack: https://github.com/UIPEthernet/UIPEthernet.


The original project only supports a single Ethernet interface, which may be too little in some specific applications.
This fork adds support for multiple instances of Ethernet interfaces based on multiple ENC28J60 network chips.

Tested on ESP8266 with two ENC28J60 ethernet controller chips.

Original UIPEthernet docs follow :)

UIPEthernet

UIPEthernet library for Arduinos (Atmel AVR-s,Atmel SAM3X8E ARM Cortex-M3,STM32F series,ESP8266,Intel ARC32(Genuino101),Nordic nRF51(RFduino),Teensy boards,Realtek Ameba(RTL8195A,RTL8710)), ENC28j60 network chip compatible with Wiznet W5100 API

Original UIPEthernet writed by Norbert Truchsess.

You can find wiring diagram for more board in the hardware directory.

Modifications:

• Replaced import to include, because gcc say 'import is deprecated'.

• Added support for STM32F, and ESP8266 MCU-s.

• Merged martinayotte's modification (Correct s_dhcp ~40K more memory usage with STM32F MCU-s.)

• Moved htons,ntohs,htonl,ntohl definitions to uip.h.

• Corrected infinite loops.

• Set the version to 2.0.3

• Corrected ESP8266 exception(28).

• Added watchdog reset calls in functions for stable running on ESP8266.

• Added geterevid function to get ENC28j60 chip erevid (revision information).

• Changed linkStatus to static for outside call.

• Added functions bypass, if can't communicate with ethernet device.

• Changed debuging/logging. Remove individual debuging. Add global and scalable debuging feature. You can setup debuging/logging level in utility/logging.h You can use this header file in Your scetch too. Add "LogObject" define for serial logging/debuging with board specific default setting.

• Added support to MBED/SMeshStudio IDE. (Compiled and tested on Nucleo-F302R8. (STM32F302R8))

• Added Abstract Print class to MBED for full compatibility (Can use print, println with uip objects.)

• Errata#12 corrected (by seydamir).

• Created v2.0.2 release.

If You use NodeMCU please check wiring first: https://github.com/UIPEthernet/UIPEthernet/blob/master/hardware/NodeMCU_enc28j60_wiring.PNG

• You can save 5K flash if you disable UDP support.

• Correction code of Errata#12 modified.

• Added support for Intel ARC32(Genuino101), Nordic nRF51(RFduino), Teensy boards

• Issue#4 corrected

• Added support for Realtek Ameba(RTL8195A,RTL8710)

• Added direct broadcast support

• Issue#5 corrected: You can save 5K flash memory with disable UDP support.

• Issue#6 corrected: Added support Eclipse with arduino plugin

• Issue#8, and Issue#9 corrected: Modified DHCP code: Moved timeouts define to dhcp.h

• Issue#11 corrected: Changed ENC28J60_CONTROL_CS pin to 10 on Arduino Due

• New release:2.0.4

• Added support for Arduino_Core_STM32.

• Endianness configuration/detection changed.

• Added support for adafruit wiced feather.

• Arduino Mega2560 upload error (3 !!!) corrected.

• Added setup SS pin to output.

• New release:2.0.5

• Added support ESP32 and SAMD

• New release:2.0.6

• bug fixes (jandrassy)

• Ethernet lib compatibility: init(cs_pin) (by phd) and linkStatus

• ARP Table improvement by dimitar-kunchev

• UIPServer esp32 core 1.0.1 compilation compatibility (jandrassy)

• uipethernet-conf.h options can be specified as -D (jandrassy)

• New release:2.0.7

• Fix local UDP broadcast address evaluation with ~ operator on 32bit systems (pknoe3lh)

• Re-fix Errata 14 (Bigpet)

• ENC28J60_USE_SPILIB for ARDUINO_ARCH_AVR and ARDUINO_ARCH_MEGAAVR (jandrassy)

• Add support for Teensy4 boards (IMXRT1062) (rjongeneelen)

• EthernetServer.accept() implementation (jandrassy)

• compilation with logging enabled fixes for megaavr core (jandrassy)

• stm32 blue pill wiring picture corrected (jandrassy)

• New release:2.0.8