Skip to content

CQBinh/ruby-style-guide

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 

Repository files navigation

Prelude

Role models are important.
-- Officer Alex J. Murphy / RoboCop

One thing has always bothered me as a Ruby developer - Python developers have a great programming style reference (PEP-8) and we never got an official guide, documenting Ruby coding style and best practices. And I do believe that style matters. I also believe that a great hacker community, such as Ruby has, should be quite capable of producing this coveted document.

This guide started its life as our internal company Ruby coding guidelines (written by yours truly). At some point I decided that the work I was doing might be interesting to members of the Ruby community in general and that the world had little need for another internal company guideline. But the world could certainly benefit from a community-driven and community-sanctioned set of practices, idioms and style prescriptions for Ruby programming.

Since the inception of the guide I've received a lot of feedback from members of the exceptional Ruby community around the world. Thanks for all the suggestions and the support! Together we can make a resource beneficial to each and every Ruby developer out there.

By the way, if you're into Rails you might want to check out the complementary Ruby on Rails Style Guide.

The Ruby Style Guide

This Ruby style guide recommends best practices so that real-world Ruby programmers can write code that can be maintained by other real-world Ruby programmers. A style guide that reflects real-world usage gets used, and a style guide that holds to an ideal that has been rejected by the people it is supposed to help risks not getting used at all – no matter how good it is.

The guide is separated into several sections of related rules. I've tried to add the rationale behind the rules (if it's omitted I've assumed it's pretty obvious).

I didn't come up with all the rules out of nowhere - they are mostly based on my extensive career as a professional software engineer, feedback and suggestions from members of the Ruby community and various highly regarded Ruby programming resources, such as "Programming Ruby" and "The Ruby Programming Language".

There are some areas in which there is no clear consensus in the Ruby community regarding a particular style (like string literal quoting, spacing inside hash literals, dot position in multi-line method chaining, etc.). In such scenarios all popular styles are acknowledged and it's up to you to pick one and apply it consistently.

This style guide evolves over time as additional conventions are identified and past conventions are rendered obsolete by changes in Ruby itself.

Many projects have their own coding style guidelines (often derived from this guide). In the event of any conflicts, such project-specific guides take precedence for that project.

You can generate a PDF or an HTML copy of this guide using Pandoc.

RuboCop is a code analyzer, based on this style guide.

Translations of the guide are available in the following languages:

Table of Contents

Source Code Layout

Nearly everybody is convinced that every style but their own is ugly and unreadable. Leave out the "but their own" and they're probably right...
-- Jerry Coffin (on indentation)

  • Use UTF-8 as the source file encoding. [link]

  • Use two spaces per indentation level (aka soft tabs). No hard tabs. [link]

    # bad - four spaces
    def some_method
        do_something
    end
    
    # good
    def some_method
      do_something
    end
  • Use Unix-style line endings. (*BSD/Solaris/Linux/OS X users are covered by default, Windows users have to be extra careful.) [link]

    • If you're using Git you might want to add the following configuration setting to protect your project from Windows line endings creeping in:

      $ git config --global core.autocrlf true
  • Don't use ; to separate statements and expressions. As a corollary - use one expression per line. [link]

    # bad
    puts 'foobar'; # superfluous semicolon
    
    puts 'foo'; puts 'bar' # two expressions on the same line
    
    # good
    puts 'foobar'
    
    puts 'foo'
    puts 'bar'
    
    puts 'foo', 'bar' # this applies to puts in particular
  • Prefer a single-line format for class definitions with no body. [link]

    # bad
    class FooError < StandardError
    end
    
    # okish
    class FooError < StandardError; end
    
    # good
    FooError = Class.new(StandardError)
  • Avoid single-line methods. Although they are somewhat popular in the wild, there are a few peculiarities about their definition syntax that make their use undesirable. At any rate - there should be no more than one expression in a single-line method. [link]

    # bad
    def too_much; something; something_else; end
    
    # okish - notice that the first ; is required
    def no_braces_method; body end
    
    # okish - notice that the second ; is optional
    def no_braces_method; body; end
    
    # okish - valid syntax, but no ; makes it kind of hard to read
    def some_method() body end
    
    # good
    def some_method
      body
    end

    One exception to the rule are empty-body methods.

    # good
    def no_op; end
  • Use spaces around operators, after commas, colons and semicolons. Whitespace might be (mostly) irrelevant to the Ruby interpreter, but its proper use is the key to writing easily readable code. [link]

    sum = 1 + 2
    a, b = 1, 2
    class FooError < StandardError; end

    The only exception, regarding operators, is the exponent operator:

    # bad
    e = M * c ** 2
    
    # good
    e = M * c**2
  • No spaces after (, [ or before ], ). Use spaces around { and before }. [link]

    # bad
    some( arg ).other
    [ 1, 2, 3 ].each{|e| puts e}
    
    # good
    some(arg).other
    [1, 2, 3].each { |e| puts e }

    { and } deserve a bit of clarification, since they are used for block and hash literals, as well as string interpolation.

    For hash literals two styles are considered acceptable. The first variant is slightly more readable (and arguably more popular in the Ruby community in general). The second variant has the advantage of adding visual difference between block and hash literals. Whichever one you pick - apply it consistently.

    # good - space after { and before }
    { one: 1, two: 2 }
    
    # good - no space after { and before }
    {one: 1, two: 2}

    With interpolated expressions, there should be no padded-spacing inside the braces.

    # bad
    "From: #{ user.first_name }, #{ user.last_name }"
    
    # good
    "From: #{user.first_name}, #{user.last_name}"
  • No space after !. [link]

    # bad
    ! something
    
    # good
    !something
  • No space inside range literals. [link]

    # bad
    1 .. 3
    'a' ... 'z'
    
    # good
    1..3
    'a'...'z'
  • Indent when as deep as case. This is the style established in both "The Ruby Programming Language" and "Programming Ruby". [link]

    # bad
    case
      when song.name == 'Misty'
        puts 'Not again!'
      when song.duration > 120
        puts 'Too long!'
      when Time.now.hour > 21
        puts "It's too late"
      else
        song.play
    end
    
    # good
    case
    when song.name == 'Misty'
      puts 'Not again!'
    when song.duration > 120
      puts 'Too long!'
    when Time.now.hour > 21
      puts "It's too late"
    else
      song.play
    end
  • When assigning the result of a conditional expression to a variable, preserve the usual alignment of its branches. [link]

    # bad - pretty convoluted
    kind = case year
    when 1850..1889 then 'Blues'
    when 1890..1909 then 'Ragtime'
    when 1910..1929 then 'New Orleans Jazz'
    when 1930..1939 then 'Swing'
    when 1940..1950 then 'Bebop'
    else 'Jazz'
    end
    
    result = if some_cond
      calc_something
    else
      calc_something_else
    end
    
    # good - it's apparent what's going on
    kind = case year
           when 1850..1889 then 'Blues'
           when 1890..1909 then 'Ragtime'
           when 1910..1929 then 'New Orleans Jazz'
           when 1930..1939 then 'Swing'
           when 1940..1950 then 'Bebop'
           else 'Jazz'
           end
    
    result = if some_cond
               calc_something
             else
               calc_something_else
             end
    
    # good (and a bit more width efficient)
    kind =
      case year
      when 1850..1889 then 'Blues'
      when 1890..1909 then 'Ragtime'
      when 1910..1929 then 'New Orleans Jazz'
      when 1930..1939 then 'Swing'
      when 1940..1950 then 'Bebop'
      else 'Jazz'
      end
    
    result =
      if some_cond
        calc_something
      else
        calc_something_else
      end
  • Use empty lines between method definitions and also to break up methods into logical paragraphs internally. [link]

    def some_method
      data = initialize(options)
    
      data.manipulate!
    
      data.result
    end
    
    def some_method
      result
    end
  • Avoid comma after the last parameter in a method call, especially when the parameters are not on separate lines. [link]

    # bad - easier to move/add/remove parameters, but still not preferred
    some_method(
                 size,
                 count,
                 color,
               )
    
    # bad
    some_method(size, count, color, )
    
    # good
    some_method(size, count, color)
  • Use spaces around the = operator when assigning default values to method parameters: [link]

    # bad
    def some_method(arg1=:default, arg2=nil, arg3=[])
      # do something...
    end
    
    # good
    def some_method(arg1 = :default, arg2 = nil, arg3 = [])
      # do something...
    end

    While several Ruby books suggest the first style, the second is much more prominent in practice (and arguably a bit more readable).

  • Avoid line continuation \ where not required. In practice, avoid using line continuations for anything but string concatenation. [link]

    # bad
    result = 1 - \
             2
    
    # good (but still ugly as hell)
    result = 1 \
             - 2
    
    long_string = 'First part of the long string' \
                  ' and second part of the long string'
  • Adopt a consistent multi-line method chaining style. There are two popular styles in the Ruby community, both of which are considered good - leading . (Option A) and trailing . (Option B). [link]

    • (Option A) When continuing a chained method invocation on another line keep the . on the second line.

      # bad - need to consult first line to understand second line
      one.two.three.
        four
      
      # good - it's immediately clear what's going on the second line
      one.two.three
        .four
    • (Option B) When continuing a chained method invocation on another line, include the . on the first line to indicate that the expression continues.

      # bad - need to read ahead to the second line to know that the chain continues
      one.two.three
        .four
      
      # good - it's immediately clear that the expression continues beyond the first line
      one.two.three.
        four

    A discussion on the merits of both alternative styles can be found here.

  • Align the parameters of a method call if they span more than one line. When aligning parameters is not appropriate due to line-length constraints, single indent for the lines after the first is also acceptable. [link]

    # starting point (line is too long)
    def send_mail(source)
      Mailer.deliver(to: 'bob@example.com', from: 'us@example.com', subject: 'Important message', body: source.text)
    end
    
    # bad (double indent)
    def send_mail(source)
      Mailer.deliver(
          to: 'bob@example.com',
          from: 'us@example.com',
          subject: 'Important message',
          body: source.text)
    end
    
    # good
    def send_mail(source)
      Mailer.deliver(to: 'bob@example.com',
                     from: 'us@example.com',
                     subject: 'Important message',
                     body: source.text)
    end
    
    # good (normal indent)
    def send_mail(source)
      Mailer.deliver(
        to: 'bob@example.com',
        from: 'us@example.com',
        subject: 'Important message',
        body: source.text
      )
    end
  • Align the elements of array literals spanning multiple lines. [link]

    # bad - single indent
    menu_item = ['Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam',
      'Baked beans', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam']
    
    # good
    menu_item = [
      'Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam',
      'Baked beans', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam'
    ]
    
    # good
    menu_item =
      ['Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam',
       'Baked beans', 'Spam', 'Spam', 'Spam', 'Spam', 'Spam']
  • Add underscores to large numeric literals to improve their readability. [link]

    # bad - how many 0s are there?
    num = 1000000
    
    # good - much easier to parse for the human brain
    num = 1_000_000
  • Use Rdoc and its conventions for API documentation. Don't put an empty line between the comment block and the def. [link]

  • Limit lines to 80 characters. [link]

  • Avoid trailing whitespace. [link]

  • End each file with a newline. [link]

  • Don't use block comments. They cannot be preceded by whitespace and are not as easy to spot as regular comments. [link]

    # bad
    =begin
    comment line
    another comment line
    =end
    
    # good
    # comment line
    # another comment line

Syntax

  • Use :: only to reference constants(this includes classes and modules) and constructors (like Array() or Nokogiri::HTML()). Do not use :: for regular method invocation. [link]

    # bad
    SomeClass::some_method
    some_object::some_method
    
    # good
    SomeClass.some_method
    some_object.some_method
    SomeModule::SomeClass::SOME_CONST
    SomeModule::SomeClass()
  • Use def with parentheses when there are parameters. Omit the parentheses when the method doesn't accept any parameters. [link]

    # bad
    def some_method()
      # body omitted
    end
    
    # good
    def some_method
      # body omitted
    end
    
    # bad
    def some_method_with_parameters param1, param2
      # body omitted
    end
    
    # good
    def some_method_with_parameters(param1, param2)
      # body omitted
    end
  • Define optional arguments at the end of the list of arguments. Ruby has some unexpected results when calling methods that have optional arguments at the front of the list. [link]

    # bad
    def some_method(a = 1, b = 2, c, d)
      puts "#{a}, #{b}, #{c}, #{d}"
    end
    
    some_method('w', 'x') # => '1, 2, w, x'
    some_method('w', 'x', 'y') # => 'w, 2, x, y'
    some_method('w', 'x', 'y', 'z') # => 'w, x, y, z'
    
    # good
    def some_method(c, d, a = 1, b = 2)
      puts "#{a}, #{b}, #{c}, #{d}"
    end
    
    some_method('w', 'x') # => '1, 2, w, x'
    some_method('w', 'x', 'y') # => 'y, 2, w, x'
    some_method('w', 'x', 'y', 'z') # => 'y, z, w, x'
  • Avoid the use of parallel assignment for defining variables. Parallel assignment is allowed when it is the return of a method call, used with the splat operator, or when used to swap variable assignment. Parallel assignment is less readable than separate assignment. [link]

    # bad
    a, b, c, d = 'foo', 'bar', 'baz', 'foobar'
    
    # good
    a = 'foo'
    b = 'bar'
    c = 'baz'
    d = 'foobar'
    
    # good - swapping variable assignment
    # Swapping variable assignment is a special case because it will allow you to
    # swap the values that are assigned to each variable.
    a = 'foo'
    b = 'bar'
    
    a, b = b, a
    puts a # => 'bar'
    puts b # => 'foo'
    
    # good - method return
    def multi_return
      [1, 2]
    end
    
    first, second = multi_return
    
    # good - use with splat
    first, *list = [1, 2, 3, 4] # first => 1, list => [2, 3, 4]
    
    hello_array = *'Hello' # => ["Hello"]
    
    a = *(1..3) # => [1, 2, 3]
  • Avoid the use of unnecessary trailing underscore variables during parallel assignment. Named underscore variables are to be preferred over underscore variables because of the context that they provide. Trailing underscore variables are necessary when there is a splat variable defined on the left side of the assignment, and the splat variable is not an underscore. [link]

    # bad
    foo = 'one,two,three,four,five'
    # Unnecessary assignment that does not provide useful information
    first, second, _ = foo.split(',')
    first, _, _ = foo.split(',')
    first, *_ = foo.split(',')
    
    
    # good
    foo = 'one,two,three,four,five'
    # The underscores are needed to show that you want all elements
    # except for the last number of underscore elements
    *beginning, _ = foo.split(',')
    *beginning, something, _ = foo.split(',')
    
    a, = foo.split(',')
    a, b, = foo.split(',')
    # Unnecessary assignment to an unused variable, but the assignment
    # provides us with useful information.
    first, _second = foo.split(',')
    first, _second, = foo.split(',')
    first, *_ending = foo.split(',')
  • Do not use for, unless you know exactly why. Most of the time iterators should be used instead. for is implemented in terms of each (so you're adding a level of indirection), but with a twist - for doesn't introduce a new scope (unlike each) and variables defined in its block will be visible outside it. [link]

    arr = [1, 2, 3]
    
    # bad
    for elem in arr do
      puts elem
    end
    
    # note that elem is accessible outside of the for loop
    elem # => 3
    
    # good
    arr.each { |elem| puts elem }
    
    # elem is not accessible outside each's block
    elem # => NameError: undefined local variable or method `elem'
  • Do not use then for multi-line if/unless. [link]

    # bad
    if some_condition then
      # body omitted
    end
    
    # good
    if some_condition
      # body omitted
    end
  • Always put the condition on the same line as the if/unless in a multi-line conditional. [link]

    # bad
    if
      some_condition
      do_something
      do_something_else
    end
    
    # good
    if some_condition
      do_something
      do_something_else
    end
  • Favor the ternary operator(?:) over if/then/else/end constructs. It's more common and obviously more concise. [link]

    # bad
    result = if some_condition then something else something_else end
    
    # good
    result = some_condition ? something : something_else
  • Use one expression per branch in a ternary operator. This also means that ternary operators must not be nested. Prefer if/else constructs in these cases. [link]

    # bad
    some_condition ? (nested_condition ? nested_something : nested_something_else) : something_else
    
    # good
    if some_condition
      nested_condition ? nested_something : nested_something_else
    else
      something_else
    end
  • Do not use if x; .... Use the ternary operator instead. [link]

    # bad
    result = if some_condition; something else something_else end
    
    # good
    result = some_condition ? something : something_else
  • Leverage the fact that if and case are expressions which return a result. [link]

    # bad
    if condition
      result = x
    else
      result = y
    end
    
    # good
    result =
      if condition
        x
      else
        y
      end
  • Use when x then ... for one-line cases. The alternative syntax when x: ... has been removed as of Ruby 1.9. [link]

  • Do not use when x; .... See the previous rule. [link]

  • Use ! instead of not. [link]

    # bad - parentheses are required because of op precedence
    x = (not something)
    
    # good
    x = !something
  • Avoid the use of !!. [link]

    # bad
    x = 'test'
    # obscure nil check
    if !!x
      # body omitted
    end
    
    x = false
    # double negation is useless on booleans
    !!x # => false
    
    # good
    x = 'test'
    unless x.nil?
      # body omitted
    end
  • The and and or keywords are banned. It's just not worth it. Always use && and || instead. [link]

    # bad
    # boolean expression
    if some_condition and some_other_condition
      do_something
    end
    
    # control flow
    document.saved? or document.save!
    
    # good
    # boolean expression
    if some_condition && some_other_condition
      do_something
    end
    
    # control flow
    document.saved? || document.save!
  • Avoid multi-line ?: (the ternary operator); use if/unless instead. [link]

  • Favor modifier if/unless usage when you have a single-line body. Another good alternative is the usage of control flow &&/||. [link]

    # bad
    if some_condition
      do_something
    end
    
    # good
    do_something if some_condition
    
    # another good option
    some_condition && do_something
  • Avoid modifier if/unless usage at the end of a non-trivial multi-line block. [link]

    # bad
    10.times do
      # multi-line body omitted
    end if some_condition
    
    # good
    if some_condition
      10.times do
        # multi-line body omitted
      end
    end
  • Avoid nested modifier if/unless/while/until usage. Favor &&/|| if appropriate. [link]

    # bad
    do_something if other_condition if some_condition
    
    # good
    do_something if some_condition && other_condition
  • Favor unless over if for negative conditions (or control flow ||). [link]

    # bad
    do_something if !some_condition
    
    # bad
    do_something if not some_condition
    
    # good
    do_something unless some_condition
    
    # another good option
    some_condition || do_something
  • Do not use unless with else. Rewrite these with the positive case first. [link]

    # bad
    unless success?
      puts 'failure'
    else
      puts 'success'
    end
    
    # good
    if success?
      puts 'success'
    else
      puts 'failure'
    end
  • Don't use parentheses around the condition of an if/unless/while/until. [link]

    # bad
    if (x > 10)
      # body omitted
    end
    
    # good
    if x > 10
      # body omitted
    end

Note that there is an exception to this rule, namely safe assignment in condition.

  • Do not use while/until condition do for multi-line while/until. [link]

    # bad
    while x > 5 do
      # body omitted
    end
    
    until x > 5 do
      # body omitted
    end
    
    # good
    while x > 5
      # body omitted
    end
    
    until x > 5
      # body omitted
    end
  • Favor modifier while/until usage when you have a single-line body. [link]

    # bad
    while some_condition
      do_something
    end
    
    # good
    do_something while some_condition
  • Favor until over while for negative conditions. [link]

    # bad
    do_something while !some_condition
    
    # good
    do_something until some_condition
  • Use Kernel#loop instead of while/until when you need an infinite loop. [link]

    # bad
    while true
      do_something
    end
    
    until false
      do_something
    end
    
    # good
    loop do
      do_something
    end
  • Use Kernel#loop with break rather than begin/end/until or begin/end/while for post-loop tests. [link]

    # bad
    begin
      puts val
      val += 1
    end while val < 0
    
    # good
    loop do
      puts val
      val += 1
      break unless val < 0
    end
  • Omit parentheses around parameters for methods that are part of an internal DSL (e.g. Rake, Rails, RSpec), methods that have "keyword" status in Ruby (e.g. attr_reader, puts) and attribute access methods. Use parentheses around the arguments of all other method invocations. [link]

    class Person
      # bad
      attr_reader(:name, :age)
      # good
      attr_reader :name, :age
    
      # body omitted
    end
    
    # bad
    temperance = Person.new 'Temperance', 30
    # good
    temperance = Person.new('Temperance', 30)
    
    # bad
    puts(temperance.age)
    # good
    puts temperance.age
    
    # bad
    x = Math.sin y
    # good
    x = Math.sin(y)
    
    # bad
    array.delete e
    # good
    array.delete(e)
    
    # bad
    expect(bowling.score).to eq 0
    # good
    expect(bowling.score).to eq(0)
  • Omit the outer braces around an implicit options hash. [link]

    # bad
    user.set({ name: 'John', age: 45, permissions: { read: true } })
    
    # good
    user.set(name: 'John', age: 45, permissions: { read: true })
  • Omit both the outer braces and parentheses for methods that are part of an internal DSL. [link]

    class Person < ActiveRecord::Base
      # bad
      validates(:name, { presence: true, length: { within: 1..10 } })
    
      # good
      validates :name, presence: true, length: { within: 1..10 }
    end
  • Omit parentheses for method calls with no arguments. [link]

    # bad
    Kernel.exit!()
    2.even?()
    fork()
    'test'.upcase()
    
    # good
    Kernel.exit!
    2.even?
    fork
    'test'.upcase
  • Use the proc invocation shorthand when the invoked method is the only operation of a block. [link]

    # bad
    names.map { |name| name.upcase }
    
    # good
    names.map(&:upcase)
  • Prefer {...} over do...end for single-line blocks. Avoid using {...} for multi-line blocks (multi-line chaining is always ugly). Always use do...end for "control flow" and "method definitions" (e.g. in Rakefiles and certain DSLs). Avoid do...end when chaining. [link]

    names = %w(Bozhidar Steve Sarah)
    
    # bad
    names.each do |name|
      puts name
    end
    
    # good
    names.each { |name| puts name }
    
    # bad
    names.select do |name|
      name.start_with?('S')
    end.map { |name| name.upcase }
    
    # good
    names.select { |name| name.start_with?('S') }.map(&:upcase)

    Some will argue that multi-line chaining would look OK with the use of {...}, but they should ask themselves - is this code really readable and can the blocks' contents be extracted into nifty methods?

  • Consider using explicit block argument to avoid writing block literal that just passes its arguments to another block. Beware of the performance impact, though, as the block gets converted to a Proc. [link]

    require 'tempfile'
    
    # bad
    def with_tmp_dir
      Dir.mktmpdir do |tmp_dir|
        Dir.chdir(tmp_dir) { |dir| yield dir }  # block just passes arguments
      end
    end
    
    # good
    def with_tmp_dir(&block)
      Dir.mktmpdir do |tmp_dir|
        Dir.chdir(tmp_dir, &block)
      end
    end
    
    with_tmp_dir do |dir|
      puts "dir is accessible as a parameter and pwd is set: #{dir}"
    end
  • Avoid return where not required for flow of control. [link]

    # bad
    def some_method(some_arr)
      return some_arr.size
    end
    
    # good
    def some_method(some_arr)
      some_arr.size
    end
  • Avoid self where not required. (It is only required when calling a self write accessor.) [link]

    # bad
    def ready?
      if self.last_reviewed_at > self.last_updated_at
        self.worker.update(self.content, self.options)
        self.status = :in_progress
      end
      self.status == :verified
    end
    
    # good
    def ready?
      if last_reviewed_at > last_updated_at
        worker.update(content, options)
        self.status = :in_progress
      end
      status == :verified
    end
  • As a corollary, avoid shadowing methods with local variables unless they are both equivalent. [link]

    class Foo
      attr_accessor :options
    
      # ok
      def initialize(options)
        self.options = options
        # both options and self.options are equivalent here
      end
    
      # bad
      def do_something(options = {})
        unless options[:when] == :later
          output(self.options[:message])
        end
      end
    
      # good
      def do_something(params = {})
        unless params[:when] == :later
          output(options[:message])
        end
      end
    end
  • Don't use the return value of = (an assignment) in conditional expressions unless the assignment is wrapped in parentheses. This is a fairly popular idiom among Rubyists that's sometimes referred to as safe assignment in condition. [link]

    # bad (+ a warning)
    if v = array.grep(/foo/)
      do_something(v)
      # some code
    end
    
    # good (MRI would still complain, but RuboCop won't)
    if (v = array.grep(/foo/))
      do_something(v)
      # some code
    end
    
    # good
    v = array.grep(/foo/)
    if v
      do_something(v)
      # some code
    end
  • Use shorthand self assignment operators whenever applicable. [link]

    # bad
    x = x + y
    x = x * y
    x = x**y
    x = x / y
    x = x || y
    x = x && y
    
    # good
    x += y
    x *= y
    x **= y
    x /= y
    x ||= y
    x &&= y
  • Use ||= to initialize variables only if they're not already initialized. [link]

    # bad
    name = name ? name : 'Bozhidar'
    
    # bad
    name = 'Bozhidar' unless name
    
    # good - set name to 'Bozhidar', only if it's nil or false
    name ||= 'Bozhidar'
  • Don't use ||= to initialize boolean variables. (Consider what would happen if the current value happened to be false.) [link]

    # bad - would set enabled to true even if it was false
    enabled ||= true
    
    # good
    enabled = true if enabled.nil?
  • Use &&= to preprocess variables that may or may not exist. Using &&= will change the value only if it exists, removing the need to check its existence with if. [link]

    # bad
    if something
      something = something.downcase
    end
    
    # bad
    something = something ? something.downcase : nil
    
    # ok
    something = something.downcase if something
    
    # good
    something = something && something.downcase
    
    # better
    something &&= something.downcase
  • Avoid explicit use of the case equality operator ===. As its name implies it is meant to be used implicitly by case expressions and outside of them it yields some pretty confusing code. [link]

    # bad
    Array === something
    (1..100) === 7
    /something/ === some_string
    
    # good
    something.is_a?(Array)
    (1..100).include?(7)
    some_string =~ /something/
  • Do not use eql? when using == will do. The stricter comparison semantics provided by eql? are rarely needed in practice. [link]

    # bad - eql? is the same as == for strings
    'ruby'.eql? some_str
    
    # good
    'ruby' == some_str
    1.0.eql? x # eql? makes sense here if want to differentiate between Integer and Float 1
  • Avoid using Perl-style special variables (like $:, $;, etc. ). They are quite cryptic and their use in anything but one-liner scripts is discouraged. Use the human-friendly aliases provided by the English library. [link]

    # bad
    $:.unshift File.dirname(__FILE__)
    
    # good
    require 'English'
    $LOAD_PATH.unshift File.dirname(__FILE__)
  • Do not put a space between a method name and the opening parenthesis. [link]

    # bad
    f (3 + 2) + 1
    
    # good
    f(3 + 2) + 1
  • If the first argument to a method begins with an open parenthesis, always use parentheses in the method invocation. For example, write f((3 + 2) + 1). [link]

  • Always run the Ruby interpreter with the -w option so it will warn you if you forget either of the rules above! [link]

  • Do not use nested method definitions, use lambda instead. Nested method definitions actually produce methods in the same scope (e.g. class) as the outer method. Furthermore, the "nested method" will be redefined every time the method containing its definition is invoked. [link]

    # bad
    def foo(x)
      def bar(y)
        # body omitted
      end
    
      bar(x)
    end
    
    # good - the same as the previous, but no bar redefinition on every foo call
    def bar(y)
      # body omitted
    end
    
    def foo(x)
      bar(x)
    end
    
    # also good
    def foo(x)
      bar = ->(y) { ... }
      bar.call(x)
    end
  • Use the new lambda literal syntax for single line body blocks. Use the lambda method for multi-line blocks. [link]

    # bad
    l = lambda { |a, b| a + b }
    l.call(1, 2)
    
    # correct, but looks extremely awkward
    l = ->(a, b) do
      tmp = a * 7
      tmp * b / 50
    end
    
    # good
    l = ->(a, b) { a + b }
    l.call(1, 2)
    
    l = lambda do |a, b|
      tmp = a * 7
      tmp * b / 50
    end
  • Don't omit the parameter parentheses when defining a stabby lambda with parameters. [link]

    # bad
    l = ->x, y { something(x, y) }
    
    # good
    l = ->(x, y) { something(x, y) }
  • Omit the parameter parentheses when defining a stabby lambda with no parameters. [link]

    # bad
    l = ->() { something }
    
    # good
    l = -> { something }
  • Prefer proc over Proc.new. [link]

    # bad
    p = Proc.new { |n| puts n }
    
    # good
    p = proc { |n| puts n }
  • Prefer proc.call() over proc[] or proc.() for both lambdas and procs. [link]

    # bad - looks similar to Enumeration access
    l = ->(v) { puts v }
    l[1]
    
    # also bad - uncommon syntax
    l = ->(v) { puts v }
    l.(1)
    
    # good
    l = ->(v) { puts v }
    l.call(1)
  • Prefix with _ unused block parameters and local variables. It's also acceptable to use just _ (although it's a bit less descriptive). This convention is recognized by the Ruby interpreter and tools like RuboCop and will suppress their unused variable warnings. [link]

    # bad
    result = hash.map { |k, v| v + 1 }
    
    def something(x)
      unused_var, used_var = something_else(x)
      # some code
    end
    
    # good
    result = hash.map { |_k, v| v + 1 }
    
    def something(x)
      _unused_var, used_var = something_else(x)
      # some code
    end
    
    # good
    result = hash.map { |_, v| v + 1 }
    
    def something(x)
      _, used_var = something_else(x)
      # some code
    end
  • Use $stdout/$stderr/$stdin instead of STDOUT/STDERR/STDIN. STDOUT/STDERR/STDIN are constants, and while you can actually reassign (possibly to redirect some stream) constants in Ruby, you'll get an interpreter warning if you do so. [link]

  • Use warn instead of $stderr.puts. Apart from being more concise and clear, warn allows you to suppress warnings if you need to (by setting the warn level to 0 via -W0). [link]

  • Favor the use of sprintf and its alias format over the fairly cryptic String#% method. [link]

    # bad
    '%d %d' % [20, 10]
    # => '20 10'
    
    # good
    sprintf('%d %d', 20, 10)
    # => '20 10'
    
    # good
    sprintf('%{first} %{second}', first: 20, second: 10)
    # => '20 10'
    
    format('%d %d', 20, 10)
    # => '20 10'
    
    # good
    format('%{first} %{second}', first: 20, second: 10)
    # => '20 10'
  • Favor the use of Array#join over the fairly cryptic Array#* with a string argument. [link]

    # bad
    %w(one two three) * ', '
    # => 'one, two, three'
    
    # good
    %w(one two three).join(', ')
    # => 'one, two, three'
  • Use Array() instead of explicit Array check or [*var], when dealing with a variable you want to treat as an Array, but you're not certain it's an array. [link]

    # bad
    paths = [paths] unless paths.is_a? Array
    paths.each { |path| do_something(path) }
    
    # bad (always creates a new Array instance)
    [*paths].each { |path| do_something(path) }
    
    # good (and a bit more readable)
    Array(paths).each { |path| do_something(path) }
  • Use ranges or Comparable#between? instead of complex comparison logic when possible. [link]

    # bad
    do_something if x >= 1000 && x <= 2000
    
    # good
    do_something if (1000..2000).include?(x)
    
    # good
    do_something if x.between?(1000, 2000)
  • Favor the use of predicate methods to explicit comparisons with ==. Numeric comparisons are OK. [link]

    # bad
    if x % 2 == 0
    end
    
    if x % 2 == 1
    end
    
    if x == nil
    end
    
    # good
    if x.even?
    end
    
    if x.odd?
    end
    
    if x.nil?
    end
    
    if x.zero?
    end
    
    if x == 0
    end
  • Don't do explicit non-nil checks unless you're dealing with boolean values. [link]

    # bad
    do_something if !something.nil?
    do_something if something != nil
    
    # good
    do_something if something
    
    # good - dealing with a boolean
    def value_set?
      !@some_boolean.nil?
    end
  • Avoid the use of BEGIN blocks. [link]

  • Do not use END blocks. Use Kernel#at_exit instead. [link]

    # bad
    END { puts 'Goodbye!' }
    
    # good
    at_exit { puts 'Goodbye!' }
  • Avoid the use of flip-flops. [link]

  • Avoid use of nested conditionals for flow of control. [link]

    Prefer a guard clause when you can assert invalid data. A guard clause is a conditional statement at the top of a function that bails out as soon as it can.

    # bad
    def compute_thing(thing)
      if thing[:foo]
        update_with_bar(thing)
        if thing[:foo][:bar]
          partial_compute(thing)
        else
          re_compute(thing)
        end
      end
    end
    
    # good
    def compute_thing(thing)
      return unless thing[:foo]
      update_with_bar(thing[:foo])
      return re_compute(thing) unless thing[:foo][:bar]
      partial_compute(thing)
    end

    Prefer next in loops instead of conditional blocks.

    # bad
    [0, 1, 2, 3].each do |item|
      if item > 1
        puts item
      end
    end
    
    # good
    [0, 1, 2, 3].each do |item|
      next unless item > 1
      puts item
    end
  • Prefer map over collect, find over detect, select over find_all, reduce over inject and size over length. This is not a hard requirement; if the use of the alias enhances readability, it's ok to use it. The rhyming methods are inherited from Smalltalk and are not common in other programming languages. The reason the use of select is encouraged over find_all is that it goes together nicely with reject and its name is pretty self-explanatory. [link]

  • Don't use count as a substitute for size. For Enumerable objects other than Array it will iterate the entire collection in order to determine its size. [link]

    # bad
    some_hash.count
    
    # good
    some_hash.size
  • Use flat_map instead of map + flatten. This does not apply for arrays with a depth greater than 2, i.e. if users.first.songs == ['a', ['b','c']], then use map + flatten rather than flat_map. flat_map flattens the array by 1, whereas flatten flattens it all the way. [link]

    # bad
    all_songs = users.map(&:songs).flatten.uniq
    
    # good
    all_songs = users.flat_map(&:songs).uniq
  • Prefer reverse_each to reverse.each because some classes that include Enumerable will provide an efficient implementation. Even in the worst case where a class does not provide a specialized implementation, the general implementation inherited from Enumerable will be at least as efficient as using reverse.each. [link]

    # bad
    array.reverse.each { ... }
    
    # good
    array.reverse_each { ... }

Naming

The only real difficulties in programming are cache invalidation and naming things.
-- Phil Karlton

  • Name identifiers in English. [link]

    # bad - identifier using non-ascii characters
    заплата = 1_000
    
    # bad - identifier is a Bulgarian word, written with Latin letters (instead of Cyrillic)
    zaplata = 1_000
    
    # good
    salary = 1_000
  • Use snake_case for symbols, methods and variables. [link]

    # bad
    :'some symbol'
    :SomeSymbol
    :someSymbol
    
    someVar = 5
    
    def someMethod
      # some code
    end
    
    def SomeMethod
      # some code
    end
    
    # good
    :some_symbol
    
    def some_method
      # some code
    end
  • Use CamelCase for classes and modules. (Keep acronyms like HTTP, RFC, XML uppercase.) [link]

    # bad
    class Someclass
      # some code
    end
    
    class Some_Class
      # some code
    end
    
    class SomeXml
      # some code
    end
    
    class XmlSomething
      # some code
    end
    
    # good
    class SomeClass
      # some code
    end
    
    class SomeXML
      # some code
    end
    
    class XMLSomething
      # some code
    end
  • Use snake_case for naming files, e.g. hello_world.rb. [link]

  • Use snake_case for naming directories, e.g. lib/hello_world/hello_world.rb. [link]

  • Aim to have just a single class/module per source file. Name the file name as the class/module, but replacing CamelCase with snake_case. [link]

  • Use SCREAMING_SNAKE_CASE for other constants. [link]

    # bad
    SomeConst = 5
    
    # good
    SOME_CONST = 5
  • The names of predicate methods (methods that return a boolean value) should end in a question mark. (i.e. Array#empty?). Methods that don't return a boolean, shouldn't end in a question mark. [link]

  • Avoid prefixing predicate methods with the auxiliary verbs such as is, does, or can. These words are redundant and inconsistent with the style of boolean methods in the Ruby core library, such as empty? and include?. [link]

    # bad
    class Person
      def is_tall?
        true
      end
    
      def can_play_basketball?
        false
      end
    
      def does_like_candy?
        true
      end
    end
    
    # good
    class Person
      def tall?
        true
      end
    
      def basketball_player?
        false
      end
    
      def likes_candy?
        true
      end
    end
  • The names of potentially dangerous methods (i.e. methods that modify self or the arguments, exit! (doesn't run the finalizers like exit does), etc.) should end with an exclamation mark if there exists a safe version of that dangerous method. [link]

    # bad - there is no matching 'safe' method
    class Person
      def update!
      end
    end
    
    # good
    class Person
      def update
      end
    end
    
    # good
    class Person
      def update!
      end
    
      def update
      end
    end
  • Define the non-bang (safe) method in terms of the bang (dangerous) one if possible. [link]

    class Array
      def flatten_once!
        res = []
    
        each do |e|
          [*e].each { |f| res << f }
        end
    
        replace(res)
      end
    
      def flatten_once
        dup.flatten_once!
      end
    end
  • When using reduce with short blocks, name the arguments |a, e| (accumulator, element). [link]

  • When defining binary operators, name the parameter other(<< and [] are exceptions to the rule, since their semantics are different). [link]

    def +(other)
      # body omitted
    end

Comments

Good code is its own best documentation. As you're about to add a comment, ask yourself, "How can I improve the code so that this comment isn't needed?" Improve the code and then document it to make it even clearer.
-- Steve McConnell

  • Write self-documenting code and ignore the rest of this section. Seriously! [link]

  • Write comments in English. [link]

  • Use one space between the leading # character of the comment and the text of the comment. [link]

  • Comments longer than a word are capitalized and use punctuation. Use one space after periods. [link]

  • Avoid superfluous comments. [link]

    # bad
    counter += 1 # Increments counter by one.
  • Keep existing comments up-to-date. An outdated comment is worse than no comment at all. [link]

Good code is like a good joke - it needs no explanation.
-- Russ Olsen

  • Avoid writing comments to explain bad code. Refactor the code to make it self-explanatory. (Do or do not - there is no try. --Yoda) [link]

Comment Annotations

  • Annotations should usually be written on the line immediately above the relevant code. [link]

  • The annotation keyword is followed by a colon and a space, then a note describing the problem. [link]

  • If multiple lines are required to describe the problem, subsequent lines should be indented three spaces after the # (one general plus two for indentation purpose). [link]

    def bar
      # FIXME: This has crashed occasionally since v3.2.1. It may
      #   be related to the BarBazUtil upgrade.
      baz(:quux)
    end
  • In cases where the problem is so obvious that any documentation would be redundant, annotations may be left at the end of the offending line with no note. This usage should be the exception and not the rule. [link]

    def bar
      sleep 100 # OPTIMIZE
    end
  • Use TODO to note missing features or functionality that should be added at a later date. [link]

  • Use FIXME to note broken code that needs to be fixed. [link]

  • Use OPTIMIZE to note slow or inefficient code that may cause performance problems. [link]

  • Use HACK to note code smells where questionable coding practices were used and should be refactored away. [link]

  • Use REVIEW to note anything that should be looked at to confirm it is working as intended. For example: REVIEW: Are we sure this is how the client does X currently? [link]

  • Use other custom annotation keywords if it feels appropriate, but be sure to document them in your project's README or similar. [link]

Classes & Modules

  • Use a consistent structure in your class definitions. [link]

    class Person
      # extend and include go first
      extend SomeModule
      include AnotherModule
    
      # inner classes
      CustomErrorKlass = Class.new(StandardError)
    
      # constants are next
      SOME_CONSTANT = 20
    
      # afterwards we have attribute macros
      attr_reader :name
    
      # followed by other macros (if any)
      validates :name
    
      # public class methods are next in line
      def self.some_method
      end
    
      # initialization goes between class methods and other instance methods
      def initialize
      end
    
      # followed by other public instance methods
      def some_method
      end
    
      # protected and private methods are grouped near the end
      protected
    
      def some_protected_method
      end
    
      private
    
      def some_private_method
      end
    end
  • Don't nest multi-line classes within classes. Try to have such nested classes each in their own file in a folder named like the containing class. [link]

    # bad
    
    # foo.rb
    class Foo
      class Bar
        # 30 methods inside
      end
    
      class Car
        # 20 methods inside
      end
    
      # 30 methods inside
    end
    
    # good
    
    # foo.rb
    class Foo
      # 30 methods inside
    end
    
    # foo/bar.rb
    class Foo
      class Bar
        # 30 methods inside
      end
    end
    
    # foo/car.rb
    class Foo
      class Car
        # 20 methods inside
      end
    end
  • Prefer modules to classes with only class methods. Classes should be used only when it makes sense to create instances out of them. [link]

    # bad
    class SomeClass
      def self.some_method
        # body omitted
      end
    
      def self.some_other_method
        # body omitted
      end
    end
    
    # good
    module SomeModule
      module_function
    
      def some_method
        # body omitted
      end
    
      def some_other_method
        # body omitted
      end
    end
  • Favor the use of module_function over extend self when you want to turn a module's instance methods into class methods. [link]

    # bad
    module Utilities
      extend self
    
      def parse_something(string)
        # do stuff here
      end
    
      def other_utility_method(number, string)
        # do some more stuff
      end
    end
    
    # good
    module Utilities
      module_function
    
      def parse_something(string)
        # do stuff here
      end
    
      def other_utility_method(number, string)
        # do some more stuff
      end
    end
  • When designing class hierarchies make sure that they conform to the Liskov Substitution Principle. [link]

  • Try to make your classes as SOLID as possible. [link]

  • Always supply a proper to_s method for classes that represent domain objects. [link]

    class Person
      attr_reader :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    
      def to_s
        "#{@first_name} #{@last_name}"
      end
    end
  • Use the attr family of functions to define trivial accessors or mutators. [link]

    # bad
    class Person
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    
      def first_name
        @first_name
      end
    
      def last_name
        @last_name
      end
    end
    
    # good
    class Person
      attr_reader :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    end
  • Avoid the use of attr. Use attr_reader and attr_accessor instead. [link]

    # bad - creates a single attribute accessor (deprecated in Ruby 1.9)
    attr :something, true
    attr :one, :two, :three # behaves as attr_reader
    
    # good
    attr_accessor :something
    attr_reader :one, :two, :three
  • Consider using Struct.new, which defines the trivial accessors, constructor and comparison operators for you. [link]

    # good
    class Person
      attr_accessor :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    end
    
    # better
    Person = Struct.new(:first_name, :last_name) do
    end
  • Don't extend an instance initialized by Struct.new. Extending it introduces a superfluous class level and may also introduce weird errors if the file is required multiple times. [link]

    # bad
    class Person < Struct.new(:first_name, :last_name)
    end
    
    # good
    Person = Struct.new(:first_name, :last_name)
  • Consider adding factory methods to provide additional sensible ways to create instances of a particular class. [link]

    class Person
      def self.create(options_hash)
        # body omitted
      end
    end
  • Prefer duck-typing over inheritance. [link]

    # bad
    class Animal
      # abstract method
      def speak
      end
    end
    
    # extend superclass
    class Duck < Animal
      def speak
        puts 'Quack! Quack'
      end
    end
    
    # extend superclass
    class Dog < Animal
      def speak
        puts 'Bau! Bau!'
      end
    end
    
    # good
    class Duck
      def speak
        puts 'Quack! Quack'
      end
    end
    
    class Dog
      def speak
        puts 'Bau! Bau!'
      end
    end
  • Avoid the usage of class (@@) variables due to their "nasty" behavior in inheritance. [link]

    class Parent
      @@class_var = 'parent'
    
      def self.print_class_var
        puts @@class_var
      end
    end
    
    class Child < Parent
      @@class_var = 'child'
    end
    
    Parent.print_class_var # => will print 'child'

    As you can see all the classes in a class hierarchy actually share one class variable. Class instance variables should usually be preferred over class variables.

  • Assign proper visibility levels to methods (private, protected) in accordance with their intended usage. Don't go off leaving everything public (which is the default). After all we're coding in Ruby now, not in Python. [link]

  • Indent the public, protected, and private methods as much as the method definitions they apply to. Leave one blank line above the visibility modifier and one blank line below in order to emphasize that it applies to all methods below it. [link]

    class SomeClass
      def public_method
        # some code
      end
    
      private
    
      def private_method
        # some code
      end
    
      def another_private_method
        # some code
      end
    end
  • Use def self.method to define class methods. This makes the code easier to refactor since the class name is not repeated. [link]

    class TestClass
      # bad
      def TestClass.some_method
        # body omitted
      end
    
      # good
      def self.some_other_method
        # body omitted
      end
    
      # Also possible and convenient when you
      # have to define many class methods.
      class << self
        def first_method
          # body omitted
        end
    
        def second_method_etc
          # body omitted
        end
      end
    end
  • Prefer alias when aliasing methods in lexical class scope as the resolution of self in this context is also lexical, and it communicates clearly to the user that the indirection of your alias will not be altered at runtime or by any subclass unless made explicit. [link]

    class Westerner
      def first_name
        @names.first
      end
    
      alias given_name first_name
    end

    Since alias, like def, is a keyword, prefer bareword arguments over symbols or strings. In other words, do alias foo bar, not alias :foo :bar.

    Also be aware of how Ruby handles aliases and inheritance: an alias references the method that was resolved at the time the alias was defined; it is not dispatched dynamically.

    class Fugitive < Westerner
      def first_name
        'Nobody'
      end
    end

    In this example, Fugitive#given_name would still call the original Westerner#first_name method, not Fugitive#first_name. To override the behavior of Fugitive#given_name as well, you'd have to redefine it in the derived class.

    class Fugitive < Westerner
      def first_name
        'Nobody'
      end
    
      alias given_name first_name
    end
  • Always use alias_method when aliasing methods of modules, classes, or singleton classes at runtime, as the lexical scope of alias leads to unpredictability in these cases. [link]

    module Mononymous
      def self.included(other)
        other.class_eval { alias_method :full_name, :given_name }
      end
    end
    
    class Sting < Westerner
      include Mononymous
    end

Exceptions

  • Prefer raise over fail for exceptions. [link]

    # bad
    fail SomeException, 'message'
    
    # good
    raise SomeException, 'message'
  • Don't specify RuntimeError explicitly in the two argument version of raise. [link]

    # bad
    raise RuntimeError, 'message'
    
    # good - signals a RuntimeError by default
    raise 'message'
  • Prefer supplying an exception class and a message as two separate arguments to raise, instead of an exception instance. [link]

    # bad
    raise SomeException.new('message')
    # Note that there is no way to do `raise SomeException.new('message'), backtrace`.
    
    # good
    raise SomeException, 'message'
    # Consistent with `raise SomeException, 'message', backtrace`.
  • Do not return from an ensure block. If you explicitly return from a method inside an ensure block, the return will take precedence over any exception being raised, and the method will return as if no exception had been raised at all. In effect, the exception will be silently thrown away. [link]

    # bad
    def foo
      raise
    ensure
      return 'very bad idea'
    end
  • Use implicit begin blocks where possible. [link]

    # bad
    def foo
      begin
        # main logic goes here
      rescue
        # failure handling goes here
      end
    end
    
    # good
    def foo
      # main logic goes here
    rescue
      # failure handling goes here
    end
  • Mitigate the proliferation of begin blocks by using contingency methods (a term coined by Avdi Grimm). [link]

    # bad
    begin
      something_that_might_fail
    rescue IOError
      # handle IOError
    end
    
    begin
      something_else_that_might_fail
    rescue IOError
      # handle IOError
    end
    
    # good
    def with_io_error_handling
       yield
    rescue IOError
      # handle IOError
    end
    
    with_io_error_handling { something_that_might_fail }
    
    with_io_error_handling { something_else_that_might_fail }
  • Don't suppress exceptions. [link]

    # bad
    begin
      # an exception occurs here
    rescue SomeError
      # the rescue clause does absolutely nothing
    end
    
    # bad
    do_something rescue nil
  • Avoid using rescue in its modifier form. [link]

    # bad - this catches exceptions of StandardError class and its descendant classes
    read_file rescue handle_error($!)
    
    # good - this catches only the exceptions of Errno::ENOENT class and its descendant classes
    def foo
      read_file
    rescue Errno::ENOENT => ex
      handle_error(ex)
    end
  • Don't use exceptions for flow of control. [link]

    # bad
    begin
      n / d
    rescue ZeroDivisionError
      puts 'Cannot divide by 0!'
    end
    
    # good
    if d.zero?
      puts 'Cannot divide by 0!'
    else
      n / d
    end
  • Avoid rescuing the Exception class. This will trap signals and calls to exit, requiring you to kill -9 the process. [link]

    # bad
    begin
      # calls to exit and kill signals will be caught (except kill -9)
      exit
    rescue Exception
      puts "you didn't really want to exit, right?"
      # exception handling
    end
    
    # good
    begin
      # a blind rescue rescues from StandardError, not Exception as many
      # programmers assume.
    rescue => e
      # exception handling
    end
    
    # also good
    begin
      # an exception occurs here
    rescue StandardError => e
      # exception handling
    end
  • Put more specific exceptions higher up the rescue chain, otherwise they'll never be rescued from. [link]

    # bad
    begin
      # some code
    rescue StandardError => e
      # some handling
    rescue IOError => e
      # some handling that will never be executed
    end
    
    # good
    begin
      # some code
    rescue IOError => e
      # some handling
    rescue StandardError => e
      # some handling
    end
  • Release external resources obtained by your program in an ensure block. [link]

    f = File.open('testfile')
    begin
      # .. process
    rescue
      # .. handle error
    ensure
      f.close if f
    end
  • Use versions of resource obtaining methods that do automatic resource cleanup when possible. [link]

    # bad - you need to close the file descriptor explicitly
    f = File.open('testfile')
    # some action on the file
    f.close
    
    # good - the file descriptor is closed automatically
    File.open('testfile') do |f|
      # some action on the file
    end
  • Favor the use of exceptions from the standard library over introducing new exception classes. [link]

Collections

  • Prefer literal array and hash creation notation (unless you need to pass parameters to their constructors, that is). [link]

    # bad
    arr = Array.new
    hash = Hash.new
    
    # good
    arr = []
    hash = {}
  • Prefer %w to the literal array syntax when you need an array of words (non-empty strings without spaces and special characters in them). Apply this rule only to arrays with two or more elements. [link]

    # bad
    STATES = ['draft', 'open', 'closed']
    
    # good
    STATES = %w(draft open closed)
  • Prefer %i to the literal array syntax when you need an array of symbols (and you don't need to maintain Ruby 1.9 compatibility). Apply this rule only to arrays with two or more elements. [link]

    # bad
    STATES = [:draft, :open, :closed]
    
    # good
    STATES = %i(draft open closed)
  • Avoid comma after the last item of an Array or Hash literal, especially when the items are not on separate lines. [link]

    # bad - easier to move/add/remove items, but still not preferred
    VALUES = [
               1001,
               2020,
               3333,
             ]
    
    # bad
    VALUES = [1001, 2020, 3333, ]
    
    # good
    VALUES = [1001, 2020, 3333]
  • Avoid the creation of huge gaps in arrays. [link]

    arr = []
    arr[100] = 1 # now you have an array with lots of nils
  • When accessing the first or last element from an array, prefer first or last over [0] or [-1]. [link]

  • Use Set instead of Array when dealing with unique elements. Set implements a collection of unordered values with no duplicates. This is a hybrid of Array's intuitive inter-operation facilities and Hash's fast lookup. [link]

  • Prefer symbols instead of strings as hash keys. [link]

    # bad
    hash = { 'one' => 1, 'two' => 2, 'three' => 3 }
    
    # good
    hash = { one: 1, two: 2, three: 3 }
  • Avoid the use of mutable objects as hash keys. [link]

  • Use the Ruby 1.9 hash literal syntax when your hash keys are symbols. [link]

    # bad
    hash = { :one => 1, :two => 2, :three => 3 }
    
    # good
    hash = { one: 1, two: 2, three: 3 }
  • Don't mix the Ruby 1.9 hash syntax with hash rockets in the same hash literal. When you've got keys that are not symbols stick to the hash rockets syntax. [link]

    # bad
    { a: 1, 'b' => 2 }
    
    # good
    { :a => 1, 'b' => 2 }
  • Use Hash#key? instead of Hash#has_key? and Hash#value? instead of Hash#has_value?. As noted here by Matz, the longer forms are considered deprecated. [link]

    # bad
    hash.has_key?(:test)
    hash.has_value?(value)
    
    # good
    hash.key?(:test)
    hash.value?(value)
  • Use Hash#each_key instead of Hash#keys.each and Hash#each_value instead of Hash#values.each. [link]

    # bad
    hash.keys.each { |k| p k }
    hash.values.each { |v| p v }
    hash.each { |k, _v| p k }
    hash.each { |_k, v| p v }
    
    # good
    hash.each_key { |k| p k }
    hash.each_value { |v| p v }
  • Use Hash#fetch when dealing with hash keys that should be present. [link]

    heroes = { batman: 'Bruce Wayne', superman: 'Clark Kent' }
    # bad - if we make a mistake we might not spot it right away
    heroes[:batman] # => 'Bruce Wayne'
    heroes[:supermann] # => nil
    
    # good - fetch raises a KeyError making the problem obvious
    heroes.fetch(:supermann)
  • Introduce default values for hash keys via Hash#fetch as opposed to using custom logic. [link]

    batman = { name: 'Bruce Wayne', is_evil: false }
    
    # bad - if we just use || operator with falsy value we won't get the expected result
    batman[:is_evil] || true # => true
    
    # good - fetch work correctly with falsy values
    batman.fetch(:is_evil, true) # => false
  • Prefer the use of the block instead of the default value in Hash#fetch if the code that has to be evaluated may have side effects or be expensive. [link]

    batman = { name: 'Bruce Wayne' }
    
    # bad - if we use the default value, we eager evaluate it
    # so it can slow the program down if done multiple times
    batman.fetch(:powers, obtain_batman_powers) # obtain_batman_powers is an expensive call
    
    # good - blocks are lazy evaluated, so only triggered in case of KeyError exception
    batman.fetch(:powers) { obtain_batman_powers }
  • Use Hash#values_at when you need to retrieve several values consecutively from a hash. [link]

    # bad
    email = data['email']
    username = data['nickname']
    
    # good
    email, username = data.values_at('email', 'nickname')
  • Rely on the fact that as of Ruby 1.9 hashes are ordered. [link]

  • Do not modify a collection while traversing it. [link]

  • When accessing elements of a collection, avoid direct access via [n] by using an alternate form of the reader method if it is supplied. This guards you from calling [] on nil. [link]

    # bad
    Regexp.last_match[1]
    
    # good
    Regexp.last_match(1)
  • When providing an accessor for a collection, provide an alternate form to save users from checking for nil before accessing an element in the collection. [link]

    # bad
    def awesome_things
      @awesome_things
    end
    
    # good
    def awesome_things(index = nil)
      if index && @awesome_things
        @awesome_things[index]
      else
        @awesome_things
      end
    end

Numbers

  • Use Integer check type of an integer number. Since Fixnum is platform-dependent, checking against it will return different results on 32-bit and 64-bit machines. [link]

    timestamp = Time.now.to_i
    
    # bad
    timestamp.is_a? Fixnum
    timestamp.is_a? Bignum
    
    # good
    timestamp.is_a? Integer

Strings

  • Prefer string interpolation and string formatting instead of string concatenation: [link]

    # bad
    email_with_name = user.name + ' <' + user.email + '>'
    
    # good
    email_with_name = "#{user.name} <#{user.email}>"
    
    # good
    email_with_name = format('%s <%s>', user.name, user.email)
  • Adopt a consistent string literal quoting style. There are two popular styles in the Ruby community, both of which are considered good - single quotes by default (Option A) and double quotes by default (Option B). [link]

    • (Option A) Prefer single-quoted strings when you don't need string interpolation or special symbols such as \t, \n, ', etc.

      # bad
      name = "Bozhidar"
      
      # good
      name = 'Bozhidar'
    • (Option B) Prefer double-quotes unless your string literal contains " or escape characters you want to suppress.

      # bad
      name = 'Bozhidar'
      
      # good
      name = "Bozhidar"

    The string literals in this guide are aligned with the first style.

  • Don't use the character literal syntax ?x. Since Ruby 1.9 it's basically redundant - ?x would interpreted as 'x' (a string with a single character in it). [link]

    # bad
    char = ?c
    
    # good
    char = 'c'
  • Don't leave out {} around instance and global variables being interpolated into a string. [link]

    class Person
      attr_reader :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    
      # bad - valid, but awkward
      def to_s
        "#@first_name #@last_name"
      end
    
      # good
      def to_s
        "#{@first_name} #{@last_name}"
      end
    end
    
    $global = 0
    # bad
    puts "$global = #$global"
    
    # good
    puts "$global = #{$global}"
  • Don't use Object#to_s on interpolated objects. It's invoked on them automatically. [link]

    # bad
    message = "This is the #{result.to_s}."
    
    # good
    message = "This is the #{result}."
  • Avoid using String#+ when you need to construct large data chunks. Instead, use String#<<. Concatenation mutates the string instance in-place and is always faster than String#+, which creates a bunch of new string objects. [link]

    # bad
    html = ''
    html += '<h1>Page title</h1>'
    
    paragraphs.each do |paragraph|
      html += "<p>#{paragraph}</p>"
    end
    
    # good and also fast
    html = ''
    html << '<h1>Page title</h1>'
    
    paragraphs.each do |paragraph|
      html << "<p>#{paragraph}</p>"
    end
  • Don't use String#gsub in scenarios in which you can use a faster more specialized alternative. [link]

    url = 'http://example.com'
    str = 'lisp-case-rules'
    
    # bad
    url.gsub('http://', 'https://')
    str.gsub('-', '_')
    
    # good
    url.sub('http://', 'https://')
    str.tr('-', '_')
  • When using heredocs for multi-line strings keep in mind the fact that they preserve leading whitespace. It's a good practice to employ some margin based on which to trim the excessive whitespace. [link]

    code = <<-END.gsub(/^\s+\|/, '')
      |def test
      |  some_method
      |  other_method
      |end
    END
    # => "def test\n  some_method\n  other_method\nend\n"
  • Use Ruby 2.3's squiggly heredocs for nicely indented multi-line strings. [link]

    # bad - using Powerpack String#strip_margin
    code = <<-END.strip_margin('|')
      |def test
      |  some_method
      |  other_method
      |end
    END
    
    # also bad
    code = <<-END
    def test
      some_method
      other_method
    end
    END
    
    # good
    code = <<~END
      def test
        some_method
        other_method
      end
    END

Regular Expressions

Some people, when confronted with a problem, think "I know, I'll use regular expressions." Now they have two problems.
-- Jamie Zawinski

  • Don't use regular expressions if you just need plain text search in string: string['text'] [link]

  • For simple constructions you can use regexp directly through string index. [link]

    match = string[/regexp/]             # get content of matched regexp
    first_group = string[/text(grp)/, 1] # get content of captured group
    string[/text (grp)/, 1] = 'replace'  # string => 'text replace'
  • Use non-capturing groups when you don't use the captured result. [link]

    # bad
    /(first|second)/
    
    # good
    /(?:first|second)/
  • Don't use the cryptic Perl-legacy variables denoting last regexp group matches ($1, $2, etc). Use Regexp.last_match(n) instead. [link]

    /(regexp)/ =~ string
    ...
    
    # bad
    process $1
    
    # good
    process Regexp.last_match(1)
  • Avoid using numbered groups as it can be hard to track what they contain. Named groups can be used instead. [link]

    # bad
    /(regexp)/ =~ string
    # some code
    process Regexp.last_match(1)
    
    # good
    /(?<meaningful_var>regexp)/ =~ string
    # some code
    process meaningful_var
  • Character classes have only a few special characters you should care about: ^, -, \, ], so don't escape . or brackets in []. [link]

  • Be careful with ^ and $ as they match start/end of line, not string endings. If you want to match the whole string use: \A and \z (not to be confused with \Z which is the equivalent of /\n?\z/). [link]

    string = "some injection\nusername"
    string[/^username$/]   # matches
    string[/\Ausername\z/] # doesn't match
  • Use x modifier for complex regexps. This makes them more readable and you can add some useful comments. Just be careful as spaces are ignored. [link]

    regexp = /
      start         # some text
      \s            # white space char
      (group)       # first group
      (?:alt1|alt2) # some alternation
      end
    /x
  • For complex replacements sub/gsub can be used with a block or a hash. [link]

    words = 'foo bar'
    words.sub(/f/, 'f' => 'F') # => 'Foo bar'
    words.gsub(/\w+/) { |word| word.capitalize } # => 'Foo Bar'

Percent Literals

  • Use %()(it's a shorthand for %Q) for single-line strings which require both interpolation and embedded double-quotes. For multi-line strings, prefer heredocs. [link]

    # bad (no interpolation needed)
    %(<div class="text">Some text</div>)
    # should be '<div class="text">Some text</div>'
    
    # bad (no double-quotes)
    %(This is #{quality} style)
    # should be "This is #{quality} style"
    
    # bad (multiple lines)
    %(<div>\n<span class="big">#{exclamation}</span>\n</div>)
    # should be a heredoc.
    
    # good (requires interpolation, has quotes, single line)
    %(<tr><td class="name">#{name}</td>)
  • Avoid %q unless you have a string with both ' and " in it. Regular string literals are more readable and should be preferred unless a lot of characters would have to be escaped in them. [link]

    # bad
    name = %q(Bruce Wayne)
    time = %q(8 o'clock)
    question = %q("What did you say?")
    
    # good
    name = 'Bruce Wayne'
    time = "8 o'clock"
    question = '"What did you say?"'
    quote = %q(<p class='quote'>"What did you say?"</p>)
  • Use %r only for regular expressions matching at least one '/' character. [link]

    # bad
    %r{\s+}
    
    # good
    %r{^/(.*)$}
    %r{^/blog/2011/(.*)$}
  • Avoid the use of %x unless you're going to invoke a command with backquotes in it(which is rather unlikely). [link]

    # bad
    date = %x(date)
    
    # good
    date = `date`
    echo = %x(echo `date`)
  • Avoid the use of %s. It seems that the community has decided :"some string" is the preferred way to create a symbol with spaces in it. [link]

  • Prefer () as delimiters for all % literals, except %r. Since parentheses often appear inside regular expressions in many scenarios a less common character like { might be a better choice for a delimiter, depending on the regexp's content. [link]

    # bad
    %w[one two three]
    %q{"Test's king!", John said.}
    
    # good
    %w(one two three)
    %q("Test's king!", John said.)

Metaprogramming

  • Avoid needless metaprogramming. [link]

  • Do not mess around in core classes when writing libraries. (Do not monkey-patch them.) [link]

  • The block form of class_eval is preferable to the string-interpolated form. [link]

    • when you use the string-interpolated form, always supply __FILE__ and __LINE__, so that your backtraces make sense:

      class_eval 'def use_relative_model_naming?; true; end', __FILE__, __LINE__
    • define_method is preferable to class_eval{ def ... }

  • When using class_eval (or other eval) with string interpolation, add a comment block showing its appearance if interpolated (a practice used in Rails code): [link]

    # from activesupport/lib/active_support/core_ext/string/output_safety.rb
    UNSAFE_STRING_METHODS.each do |unsafe_method|
      if 'String'.respond_to?(unsafe_method)
        class_eval <<-EOT, __FILE__, __LINE__ + 1
          def #{unsafe_method}(*params, &block)       # def capitalize(*params, &block)
            to_str.#{unsafe_method}(*params, &block)  #   to_str.capitalize(*params, &block)
          end                                       # end
    
          def #{unsafe_method}!(*params)              # def capitalize!(*params)
            @dirty = true                           #   @dirty = true
            super                                   #   super
          end                                       # end
        EOT
      end
    end
  • Avoid using method_missing for metaprogramming because backtraces become messy, the behavior is not listed in #methods, and misspelled method calls might silently work, e.g. nukes.launch_state = false. Consider using delegation, proxy, or define_method instead. If you must use method_missing: [link]

    • Be sure to also define respond_to_missing?

    • Only catch methods with a well-defined prefix, such as find_by_* -- make your code as assertive as possible.

    • Call super at the end of your statement

    • Delegate to assertive, non-magical methods:

      # bad
      def method_missing?(meth, *params, &block)
        if /^find_by_(?<prop>.*)/ =~ meth
          # ... lots of code to do a find_by
        else
          super
        end
      end
      
      # good
      def method_missing?(meth, *params, &block)
        if /^find_by_(?<prop>.*)/ =~ meth
          find_by(prop, *params, &block)
        else
          super
        end
      end
      
      # best of all, though, would to define_method as each findable attribute is declared
  • Prefer public_send over send so as not to circumvent private/protected visibility. [link]

    # We have  an ActiveModel Organization that includes concern Activatable
    module Activatable
      extend ActiveSupport::Concern
    
      included do
        before_create :create_token
      end
    
      private
    
      def reset_token
        # some code
      end
    
      def create_token
        # some code
      end
    
      def activate!
        # some code
      end
    end
    
    class Organization < ActiveRecord::Base
      include Activatable
    end
    
    linux_organization = Organization.find(...)
    # BAD - violates privacy
    linux_organization.send(:reset_token)
    # GOOD - should throw an exception
    linux_organization.public_send(:reset_token)
  • Prefer __send__ over send, as send may overlap with existing methods. [link]

    require 'socket'
    
    u1 = UDPSocket.new
    u1.bind('127.0.0.1', 4913)
    u2 = UDPSocket.new
    u2.connect('127.0.0.1', 4913)
    # Won't send a message to the receiver obj.
    # Instead it will send a message via UDP socket.
    u2.send :sleep, 0
    # Will actually send a message to the receiver obj.
    u2.__send__ ...

Misc

  • Write ruby -w safe code. [link]

  • Avoid hashes as optional parameters. Does the method do too much? (Object initializers are exceptions for this rule). [link]

  • Avoid methods longer than 10 LOC (lines of code). Ideally, most methods will be shorter than 5 LOC. Empty lines do not contribute to the relevant LOC. [link]

  • Avoid parameter lists longer than three or four parameters. [link]

  • If you really need "global" methods, add them to Kernel and make them private. [link]

  • Use module instance variables instead of global variables. [link]

    # bad
    $foo_bar = 1
    
    # good
    module Foo
      class << self
        attr_accessor :bar
      end
    end
    
    Foo.bar = 1
  • Use OptionParser for parsing complex command line options and ruby -s for trivial command line options. [link]

  • Prefer Time.now over Time.new when retrieving the current system time. [link]

  • Code in a functional way, avoiding mutation when that makes sense. [link]

  • Do not mutate parameters unless that is the purpose of the method. [link]

  • Avoid more than three levels of block nesting. [link]

  • Be consistent. In an ideal world, be consistent with these guidelines. [link]

  • Use common sense. [link]

Tools

Here are some tools to help you automatically check Ruby code against this guide.

RuboCop

RuboCop is a Ruby code style checker based on this style guide. RuboCop already covers a significant portion of the Guide, supports both MRI 1.9 and MRI 2.0 and has good Emacs integration.

RubyMine

RubyMine's code inspections are partially based on this guide.

Contributing

The guide is still a work in progress - some rules are lacking examples, some rules don't have examples that illustrate them clearly enough. Improving such rules is a great (and simple way) to help the Ruby community!

In due time these issues will (hopefully) be addressed - just keep them in mind for now.

Nothing written in this guide is set in stone. It's my desire to work together with everyone interested in Ruby coding style, so that we could ultimately create a resource that will be beneficial to the entire Ruby community.

Feel free to open tickets or send pull requests with improvements. Thanks in advance for your help!

You can also support the project (and RuboCop) with financial contributions via Gratipay.

Support via Gratipay

How to Contribute?

It's easy, just follow the contribution guidelines.

License

Creative Commons License This work is licensed under a Creative Commons Attribution 3.0 Unported License

Spread the Word

A community-driven style guide is of little use to a community that doesn't know about its existence. Tweet about the guide, share it with your friends and colleagues. Every comment, suggestion or opinion we get makes the guide just a little bit better. And we want to have the best possible guide, don't we?

Cheers,
Bozhidar

About

A community-driven Ruby coding style guide

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published