usb: dwc3: imx8mp: fix software node kernel dump

commit a4faee0 upstream.

When unbind and bind the device again, kernel will dump below warning:

[  173.972130] sysfs: cannot create duplicate filename '/devices/platform/soc/4c010010.usb/software_node'
[  173.981564] CPU: 2 UID: 0 PID: 536 Comm: sh Not tainted 6.12.0-rc6-06344-g2aed7c4a5c56 torvalds#144
[  173.989923] Hardware name: NXP i.MX95 15X15 board (DT)
[  173.995062] Call trace:
[  173.997509]  dump_backtrace+0x90/0xe8
[  174.001196]  show_stack+0x18/0x24
[  174.004524]  dump_stack_lvl+0x74/0x8c
[  174.008198]  dump_stack+0x18/0x24
[  174.011526]  sysfs_warn_dup+0x64/0x80
[  174.015201]  sysfs_do_create_link_sd+0xf0/0xf8
[  174.019656]  sysfs_create_link+0x20/0x40
[  174.023590]  software_node_notify+0x90/0x100
[  174.027872]  device_create_managed_software_node+0xec/0x108
...

The '4c010010.usb' device is a platform device created during the initcall
and is never removed, which causes its associated software node to persist
indefinitely.

The existing device_create_managed_software_node() does not provide a
corresponding removal function.

Replace device_create_managed_software_node() with the
device_add_software_node() and device_remove_software_node() pair to ensure
proper addition and removal of software nodes, addressing this issue.

Fixes: a9400f1 ("usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241126032841.2458338-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc3/dwc3-imx8mp.c

@@ -129,6 +129,16 @@ static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
 	writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
 }
 
+static const struct property_entry dwc3_imx8mp_properties[] = {
+	PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk"),
+	PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk"),
+	{},
+};
+
+static const struct software_node dwc3_imx8mp_swnode = {
+	.properties = dwc3_imx8mp_properties,
+};
+
 static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
 {
 	struct dwc3_imx8mp	*dwc3_imx = _dwc3_imx;
@@ -148,17 +158,6 @@ static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
 	return IRQ_HANDLED;
 }
 
-static int dwc3_imx8mp_set_software_node(struct device *dev)
-{
-	struct property_entry props[3] = { 0 };
-	int prop_idx = 0;
-
-	props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk");
-	props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk");
-
-	return device_create_managed_software_node(dev, props, NULL);
-}
-
 static int dwc3_imx8mp_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
@@ -221,17 +220,17 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
 	if (err < 0)
 		goto disable_rpm;
 
-	err = dwc3_imx8mp_set_software_node(dev);
+	err = device_add_software_node(dev, &dwc3_imx8mp_swnode);
 	if (err) {
 		err = -ENODEV;
-		dev_err(dev, "failed to create software node\n");
+		dev_err(dev, "failed to add software node\n");
 		goto disable_rpm;
 	}
 
 	err = of_platform_populate(node, NULL, NULL, dev);
 	if (err) {
 		dev_err(&pdev->dev, "failed to create dwc3 core\n");
-		goto disable_rpm;
+		goto remove_swnode;
 	}
 
 	dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
@@ -255,6 +254,8 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
 
 depopulate:
 	of_platform_depopulate(dev);
+remove_swnode:
+	device_remove_software_node(dev);
 disable_rpm:
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
@@ -268,6 +269,7 @@ static void dwc3_imx8mp_remove(struct platform_device *pdev)
 
 	pm_runtime_get_sync(dev);
 	of_platform_depopulate(dev);
+	device_remove_software_node(dev);
 
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);