flake8 dependency issue with pyflakes #540
Comments
|
Hi @cschindlbeck, |
|
Hi @cschindlbeck I created #543 to address this issue. I used pipenv to update to the same versions as per the included Pipfile and afterwards ran pip freeze to update the requirements.txt file. |
|
is resolved via #543 |
bors bot
added a commit
that referenced
this issue
Apr 8, 2022
543: requirements.txt: solve dependency issues with flake8 r=ChrisRBe a=ChrisRBe dependabot update at some point updated parts of the requirements.txt file but did not update flake8 accordingly. This change should fix this oversight. Hopefully. This is only a temporary solution until such a time where the requirements.txt is removed completely in favor of the pipfile. Should solve issues reported in #540 and #490 Co-authored-by: ChrisRBe <chrisrbe@outlook.com> Co-authored-by: ChrisRBe <31167512+ChrisRBe@users.noreply.github.com>
bors bot
added a commit
that referenced
this issue
Dec 2, 2022
622: build(deps): bump pytest-cov from 3.0.0 to 4.0.0 r=ChrisRBe a=dependabot[bot] [//]: # (dependabot-start)⚠️ **Dependabot is rebasing this PR**⚠️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li> <p><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_.</p> </li> <li> <p>Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow.</p> <p>There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>::</p> <p>[run] concurrency = multiprocessing parallel = true sigterm = true</p> </li> <li> <p>Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_.</p> </li> <li> <p>Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_.</p> </li> <li> <p>Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_.</p> </li> <li> <p>Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_.</p> </li> <li> <p>Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_.</p> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting ``@dependabot` rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - ``@dependabot` rebase` will rebase this PR - ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it - ``@dependabot` merge` will merge this PR after your CI passes on it - ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it - ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging - ``@dependabot` reopen` will reopen this PR if it is closed - ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
bors bot
added a commit
that referenced
this issue
Dec 2, 2022
622: build(deps): bump pytest-cov from 3.0.0 to 4.0.0 r=ChrisRBe a=dependabot[bot] Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li> <p><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_.</p> </li> <li> <p>Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow.</p> <p>There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>::</p> <p>[run] concurrency = multiprocessing parallel = true sigterm = true</p> </li> <li> <p>Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_.</p> </li> <li> <p>Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_.</p> </li> <li> <p>Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_.</p> </li> <li> <p>Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_.</p> </li> <li> <p>Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_.</p> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting ``@dependabot` rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - ``@dependabot` rebase` will rebase this PR - ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it - ``@dependabot` merge` will merge this PR after your CI passes on it - ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it - ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging - ``@dependabot` reopen` will reopen this PR if it is closed - ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Dependency issue when installing via Python 3.8.13 via
pip install -r requirements.txtresults in
I have manually fixed the dependecies in https://github.com/cschindlbeck/PP-P2P-Parser/tree/fix-python-3.8.13-dependencies
This could also be related to #490
The text was updated successfully, but these errors were encountered: