homebridge-enet

Gira/Jung eNet plugin for homebridge: https://github.com/nfarina/homebridge

This plugin can communicate with Jung/Gira Mobile Gateways and their provisioned devices. Currently, the whole setup needs to be done with the respective Jung/Gira eNet app. Then you need to get the channels for your devices. You might guess them - first used channel is 16. Or you use the sampe-gateway.js from the homebridge-enet package to read the config of your gateway.

Installation

1. Install homebridge using: npm install -g homebridge
2. Install this plugin using: npm install -g https://github.com/ChristophFausak/homebridge-enet
3. Update your configuration file. See the sample below.

Configuration

Configuration sample:

    "platforms": [
        {
            "platform": "eNetPlatform",
            "name": "eNet",
            "autodiscover": true,
            "gateways": [{
                "name": "Mobile Gate",
                "mac": null,
                "host": null,
                "accessories": [
                    {
                        "channel": 16,
                        "name": "Kitchen",
                        "type": "Shutter"
                    },
                    {
                        "channel": 17,
                        "name": "Toaster",
                        "type": "Switch",
                        "duration": 120
                    },
                    {
                        "channel": 18,
                        "name": "Main Light",
                        "type": "Light",
                        "dimmable": true
                    }
                ]
            }]
        }
    ]
}

autodiscover is optional. If set to false, no broadcast discovery takes place, all gateways need to have the "host" property set. Default is to autodiscover gateways using broadcasts.

gateways is a list of gateways.

For each gateway, you need to give an identification, which will be used to find the gateway on the network. You have three possibilities:

• host - if you provide a hostname or ip address that is the identification for the gateway.
• mac - you can specify the mac-address of the gateway, e.g. by running sampe-discovery.js from the homebridge-enet package.
• name - identify gateway by its name. You can set this name with the Jung/Gira eNet app. Factory default is "Mobile Gate"

accessories is a list of defined accessories on the gateway. Every accessory has the following properies:

• channel - The eNet channel assigned to the accessory.
• name - The HomeKit name of the accessory.
• type - Type of accessory. Currently supported:
  • Shutter - Window accessory. You can set the target position.
  • Switch - An on/off switch.
  • Light - Same as Switch, but with a Lightbulb icon on Homekit.
• duration - optional When the accessory is switched on, it will be automatically switched off after duration seconds. Only for Switch and Light accessories.
• dimmable - optional Only for Light accessories.

License

Published under the MIT License.