Skip to content

CmdrCody51/OctoPrint-GCodeMacros

 
 

Repository files navigation

OctoPrint Gcode Macros Plugin

Create custom commands you can add anywhere: in your gcode file, OctoPrint's terminal, gcode scripts, or other plugins to run a configured script.

Use macros for preheating your printer, levelling the bed, changing filament... Possibilities are (nearly) endless!

Installation

Install from the plugin repository or manually using this URL:

https://github.com/cp2004/OctoPrint-GCodeMacros/releases/latest/download/release.zip

Warning: This plugin only supports Python 3 installs. To find out more about upgrading your OctoPrint install to Python 3, you can take a look at this post

Warning 2: Don't try installing this plugin from the source code on GitHub, there may be some breakage as the CSS is only built on releases. If you are interested in contributing, please see the Contribution Guidelines

Configuration

Once installed, you can start defining your macros.

Macro Commands

All commands are prefixed with an @, so they don't interfere with standard gcode commands. However, this means that some commands are reserved. OctoPrint uses these specific commands for pausing & resuming prints, but also other plugins can use custom @ commands. For example, OctoLapse uses @OCTOLAPSE TAKE-SNAPSHOT or the WLED plugin uses @WLED ON or @WLED OFF to control some LEDs.

The commands are case-sensitive, and you can have spaces, numbers and punctuation in them!

These commands will not work while printing from the printer's SD card

Macro Content

Macros can contain anything, even other macros!

You can nest macros up to 5 levels deep. For example, you may have a macro @preheat, and one for @bedlevel. Maybe you want to preheat your bed before running the levelling commands!

In addition to nesting commands, you can also use the Jinja2 template syntax to implement some logic in scripts. For example, this one will make the printer move to a random position in X and Y:

@random

G1 X{{ range(200) | random}} Y{{ range(200) | random }} F3000.0;

Or maybe you fancy having a bit of fun, making your printer into a random number generator:

@random-number

M117 Random number... {{ range(100) | random }}!

Should you want to write really, really long macros, the plugin supports including them as templates using Jinja. See the template syntax documentation for more information.

Check out the full Jinja2 Template Designer Documentation for more information about the templates

Sponsors

As well as 2 others supporting me regularly through GitHub Sponsors!

Supporting my efforts

GitHub Sponsors

I created this project in my spare time, and do my best to support the community with issues and help using it. If you have found this useful or enjoyed using it then please consider supporting it's development! ❤️. You can sponsor monthly or one time, for any amount you choose.

Check out my other plugins

You can see all of my published OctoPrint plugins on the OctoPrint Plugin Repository! Or, if you're feeling nosy and want to see what else I'm working on, check out my GitHub profile.

👷

About

Configure custom gcode macros you can use anywhere!

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 94.0%
  • Jinja 2.9%
  • JavaScript 2.1%
  • SCSS 1.0%