Remove unused key/value pairs

Note that the generated `.h` files are unchanged, confirming non-use.

translation/bs-ba.json

@@ -170,14 +170,12 @@
   "T_HELP_1_6": "Odloži 1 us/MS (d:4 za ponavljanje)",
   "T_HELP_1_7": "Postavi IO.x stanje (low/HI/READ)",
   "T_HELP_COMMAND_AUX": "Postavi IO x stanje (low/HI/READ)",
-  "T_HELP_1_8": "-\\t\\t\\t",
   "T_HELP_1_9": "Konfiguracijski izbornik\\t",
   "T_HELP_1_22": "Prikaži napon na IOx (jednom/CONT)",
   "T_HELP_1_10": "Prikaži napon na svim IO (jednom/CONT)",
   "T_HELP_1_11": "Izmjeri frekvenciju na IOx (jednom/CONT)",
   "T_HELP_1_23": "Prati frekvenciju (off/ON)\\t",
   "T_HELP_1_12": "Generiši frekvenciju (off/ON)",
-  "T_HELP_1_13": "Pomoć (opšta/PROTOKOL)\\t",
   "T_HELP_1_14": "Versioninfo/statusinfo\\t",
   "T_HELP_1_15": "Bitorder (msb/LSB)\\t",
   "T_HELP_1_16": "Promjeni mod\\t\\t",
@@ -189,19 +187,11 @@
   "T_HELP_2_1": "Makro mod x/prikaži sve\\t",
   "T_HELP_2_3": "Start",
   "T_HELP_2_4": "Stop",
-  "T_HELP_2_5": "Start čitanje",
-  "T_HELP_2_6": "Stop",
   "T_HELP_2_7": "Pošalji string",
   "T_HELP_2_8": "",
   "T_HELP_2_9": "",
   "T_HELP_2_10": "Pošalji vrijednost",
   "T_HELP_2_11": "Čitaj",
-  "T_HELP_2_12": "CLK hi",
-  "T_HELP_2_13": "CLK lo",
-  "T_HELP_2_14": "CLK tick",
-  "T_HELP_2_15": "DAT hi",
-  "T_HELP_2_16": "DAT lo",
-  "T_HELP_2_17": "DAT read",
   "T_HELP_2_18": "Čitaj bit",
   "T_HELP_2_19": "Ponovi npr. r:10",
   "T_HELP_2_20": "Pročitaj/zapiši bita npr. 0x55.2",

translation/pl-pl.json

@@ -170,14 +170,12 @@
     "T_HELP_1_6": "Opóźnij 1 us/MS (d:4 aby powtórzyć)",
     "T_HELP_1_7": "Ustaw stan pinu IO.x (low/HI/READ)",
     "T_HELP_COMMAND_AUX": "Ustaw stan pinu IO x (low/HI/READ)",
-    "T_HELP_1_8": "-\\t\\t\\t",
     "T_HELP_1_9": "Menu konfiguracyjne\\t",
     "T_HELP_1_22": "Pokaż wolty na pinie IOx (jednorazowo/CIĄGLE)",
     "T_HELP_1_10": "Pokaż wolty na wszystkich pinach IOs (jednorazowo/CIĄGLE)",
     "T_HELP_1_11": "Zmierz częstotliwość na pinie IOx (jednorazowo/CIĄGLE)",
     "T_HELP_1_23": "Monitoruj częstotliwość (wył./WŁ.)\\t",
     "T_HELP_1_12": "Generuj częstotliwość (wył./WŁ.)",
-    "T_HELP_1_13": "Pomoc (ogólna/PROTOKOŁU)\\t",
     "T_HELP_1_14": "Wersja/Status\\t",
     "T_HELP_1_15": "Kolejność bitów (msb/LSB)\\t",
     "T_HELP_1_16": "Zmień tryb\\t\\t",
@@ -189,19 +187,11 @@
     "T_HELP_2_1": "Mode macro x/list all\\t",
     "T_HELP_2_3": "Uruchom",
     "T_HELP_2_4": "Zatrzymaj",
-    "T_HELP_2_5": "Uruchom z odczytem",
-    "T_HELP_2_6": "Zatrzymaj",
     "T_HELP_2_7": "Wyślij stringa",
     "T_HELP_2_8": "",
     "T_HELP_2_9": "",
     "T_HELP_2_10": "Wyślij wartość",
     "T_HELP_2_11": "Przeczytaj",
-    "T_HELP_2_12": "CLK hi",
-    "T_HELP_2_13": "CLK lo",
-    "T_HELP_2_14": "CLK tick",
-    "T_HELP_2_15": "DAT hi",
-    "T_HELP_2_16": "DAT lo",
-    "T_HELP_2_17": "DAT przeczytany",
     "T_HELP_2_18": "Bit przeczytany",
     "T_HELP_2_19": "Powtórz np. r:10",
     "T_HELP_2_20": "Ilość bitów do zapisu/odczytu np. 0x55.2",

translation/zh-cn.json

@@ -75,14 +75,12 @@
     "T_HELP_1_5": "切换到系统启动加载器\\t",
     "T_HELP_1_6": "Delay 1 us/ms\\t\\t",
     "T_HELP_1_7": "AUXPIN (low/HI/READ)\\t",
-    "T_HELP_1_8": "-\\t\\t\\t",
     "T_HELP_1_9": "AUX assignment (aux/CS)\\t",
     "T_HELP_1_22": "Show volts on IOx (once/CONT)",
     "T_HELP_1_10": "Show volts all IOs (once/CONT)",
     "T_HELP_1_11": "Measure freq on IOx (once/CONT)",
     "T_HELP_1_23": "Monitor freq (off/ON)\\t",
     "T_HELP_1_12": "生成频率（关/开）",
-    "T_HELP_1_13": "Help (general/PROTOCOL)\\t",
     "T_HELP_1_14": "版本详情/statusinfo\\t",
     "T_HELP_1_15": "Bitorder (msb/LSB)\\t",
     "T_HELP_1_16": "切换模式\\t\\t",
@@ -94,19 +92,11 @@
     "T_HELP_2_1": "Mode macro x/list all",
     "T_HELP_2_3": "Start",
     "T_HELP_2_4": "Stop",
-    "T_HELP_2_5": "Start with read",
-    "T_HELP_2_6": "Stop",
     "T_HELP_2_7": "Send string",
     "T_HELP_2_8": "",
     "T_HELP_2_9": "",
     "T_HELP_2_10": "Send value",
     "T_HELP_2_11": "Read",
-    "T_HELP_2_12": "CLK hi",
-    "T_HELP_2_13": "CLK lo",
-    "T_HELP_2_14": "CLK tick",
-    "T_HELP_2_15": "DAT hi",
-    "T_HELP_2_16": "DAT lo",
-    "T_HELP_2_17": "DAT read",
     "T_HELP_2_18": "Bit read",
     "T_HELP_2_19": "Repeat e.g. r:10",
     "T_HELP_2_20": "Bits to read/write e.g. 0x55.2",