---

Overmind is a process manager for Procfile-based applications and tmux. With Overmind, you can easily run several processes from your Procfile in a single terminal.

Procfile is a simple format to specify types of processes your application provides (such as web application server, background queue process, front-end builder) and commands to run those processes. It can significantly simplify process management for developers and is used by popular hosting platforms, such as Heroku and Deis. You can learn more about the Procfile format here.

There are some good Procfile-based process management tools, including foreman by David Dollar, which started it all. The problem with most of those tools is that processes you want to manage start to think they are logging their output into a file, and that can lead to all sorts of problems: severe lagging, and losing or breaking colored output. Tools can also add vanity information (unneeded timestamps in logs). Overmind was created to fix those problems once and for all.

See this article for a good intro and all the juicy details! Introducing Overmind and Hivemind

Overmind features

You may know several Procfile process management tools, but Overmind has some unique, extraterrestrial powers others don't:

• Overmind starts processes in a tmux session, so you can easily connect to any process and gain control over it;
• Overmind can restart a single process on the fly — you don't need to restart the whole stack;
• Overmind allows a specified process to die without interrupting all of the other ones;
• Overmind can restart specified processes automatically when they die;
• Overmind uses tmux's control mode to capture process output — so it won't be clipped, delayed, and it won't break colored output;
• Overmind can read environment variables from a file and use them as parameters so that you can configure Overmind behavior globally and/or per directory.

If a lot of those features seem like overkill for you, especially the tmux integration, you should take a look at Overmind's little sister — Hivemind!

Installation

Note: At the moment, Overmind supports Linux, *BSD, and macOS only.

Overmind works with tmux, so you need to install it first:

# on macOS (with homebrew)
$ brew install tmux

# on Ubuntu
$ apt-get install tmux

Note: You can find installation manuals for other systems here: https://github.com/tmux/tmux

There are three ways to install Overmind:

With Homebrew (macOS)

brew install overmind

With Ruby

gem install overmind

You can read about installing on Ruby On Rails [here] (https://github.com/DarthSim/overmind/blob/master/packaging/rubygems/README.md)

Download the latest Overmind release binary

You can download the latest release here.

Build Overmind from source

You need Go 1.21 or later to build the project.

$ go install github.com/DarthSim/overmind/v2@latest

The Overmind binary will be installed to $(go env GOPATH)/bin. Make sure that you added it to your PATH.

Note: You can update Overmind the same way.

Usage

In short: You can get help by running overmind -h and overmind help [command].

Running processes

Overmind reads the list of processes you want to manage from a file named Procfile. It may look like this:

web: bin/rails server
worker: bundle exec sidekiq
assets: gulp watch

To get started, you just need to run Overmind from your working directory containing a Procfile:

$ overmind start

You can also use the short alias:

$ overmind s

Specifying a Procfile

If a Procfile isn't located in your working directory, you can specify the exact path:

$ overmind start -f path/to/your/Procfile
$ OVERMIND_PROCFILE=path/to/your/Procfile overmind start

Specifying the ports

Overmind sets the environment variable PORT for each process in your Procfile so that you can do things like this:

web: bin/rails server -p $PORT

Overmind assigns the port base (5000 by default) to PORT for the first process and increases PORT by port step (100 by default) for each subsequent one. You can specify the port base and port step like this:

$ overmind start -p 3000 -P 10
$ OVERMIND_PORT=3000 OVERMIND_PORT_STEP=10 overmind start

Disabling PORT

If you don't want Overmind to set the PORT variable, you can disable it:

$ overmind start -N
$ OVERMIND_NO_PORT=1 overmind start

Running only the specified processes

You can specify the names of processes you want to run:

$ overmind start -l web,sidekiq
$ OVERMIND_PROCESSES=web,sidekiq overmind start

Not running the specified processes

Similar to the above, if there are some processes in the Procfile that you do not want to run:

$ overmind start -x web,sidekiq
$ OVERMIND_IGNORED_PROCESSES=web,sidekiq overmind start

This takes precedence over the previous -l flag. i.e. if you:

$ overmind start -l web -x web
$ OVERMIND_IGNORED_PROCESSES=web OVERMIND_PROCESSES=web overmind start

Nothing will start.

Scaling processes (formation)

By default, Overmind starts one instance of each process, but you can set the number of each process instances to run:

$ overmind start -m web=2,worker=5
$ OVERMIND_FORMATION=web=2,worker=5 overmind start

There is a special name all that you can use to scale all processes at once:

$ overmind start -m all=2,worker=5
$ OVERMIND_FORMATION=all=2,worker=5 overmind start

If you set instances number of some process to zero, this process won't be run:

$ overmind start -m some_production_task=0
$ OVERMIND_FORMATION=some_production_task=0 overmind start

Processes that can die

Usually, when a process dies, Overmind will interrupt all other processes. However, you can specify processes that can die without interrupting all other ones:

$ overmind start -c assets,npm_install
$ OVERMIND_CAN_DIE=assets,npm_install overmind start

Also, you can allow all processes to die:

$ overmind start --any-can-die
$ OVERMIND_ANY_CAN_DIE=1 overmind start

Auto-restarting processes

If some of your processes tend to randomly crash, you can tell Overmind to restart them automatically when they die:

$ overmind start -r rails,webpack
$ OVERMIND_AUTO_RESTART=rails,webpack overmind start

The special name all can also be used to restart all processes automatically when they die:

$ overmind start -r all
$ OVERMIND_AUTO_RESTART=all overmind start

Specifying the colors

Overmind colorizes process names with different colors. It may happen that these colors don't match well with your color scheme. In that case, you can specify your own colors using xterm color codes:

$ overmind start -b 123,123,125,126,127
$ OVERMIND_COLORS=123,123,125,126,127 overmind start

If you want Overmind to always use these colors, you can specify them in the environment file located in your home directory.

Show timestamps

By default, Overmind doesn't show timestamps in its output since it expects your processes to add timestamps to their own output. But you can make Overmind to add timestamps to its output:

$ overmind start -T
$ OVERMIND_SHOW_TIMESTAMPS=1 overmind start

Connecting to a process

If you need to gain access to process input, you can connect to its tmux window:

$ overmind connect <process_name>

You can safely disconnect from the window by hitting Ctrl b (or your tmux prefix) and then d.

You can omit the process name to connect to the first process defined in the Procfile.

Restarting a process

You can restart a single process without restarting all the other ones:

$ overmind restart sidekiq

You can restart multiple processes the same way:

$ overmind restart sidekiq assets

It's also possible to use wildcarded process names:

$ overmind restart 'sidekiq*'

When the command is called without any arguments, it will restart all the processes.

Stopping a process

You can stop a single process without stopping all the other ones:

$ overmind stop sidekiq

You can stop multiple processes the same way:

$ overmind stop sidekiq assets

It's also possible to use wildcarded process names:

$ overmind stop 'sidekiq*'

When the command is called without any arguments, it will stop all the processes without stopping Overmind itself.

Killing processes

If something goes wrong, you can kill all running processes:

$ overmind kill

Overmind environment

If you need to set specific environment variables before running a Procfile, you can specify them in the .overmind.env file in the current working directory, your home directory, or/and in the .env file in in the current working directory. The file should contain variable=value pairs, one per line:

PATH=$PATH:/additional/path
OVERMIND_CAN_DIE=npm_install
OVERMIND_PORT=3000

For example, if you want to use a separate Procfile.dev by default on a local environment, create .overmind.env file with OVERMIND_PROCFILE=Procfile.dev. Now, Overmind uses Procfile.dev by default.

You can specify additional env files to load with OVERMIND_ENV variable:

$ OVERMIND_ENV=./.env.local,./.env.development overmind s

The files will be loaded in the following order:

• ~/.overmind.env
• ./.overmind.env
• ./.env
• $OVERMIND_ENV

You can also opt to skip loading the .env file entirely (.overmind.env will still be read) by setting the variable OVERMIND_SKIP_ENV.

Running a command in the Overmind environment

Since you set up an environment with .env files, you may want to run a command inside this environment. You can do this using run command:

$ overmind run yarn install

Run as a daemon

Overmind can be run as a daemon:

$ overmind start -D
$ OVERMIND_DAEMONIZE=1 overmind start

Use the echo command for the logs:

$ overmind echo

You can quit daemonized Overmind with quit:

$ overmind quit

Specifying a socket

Overmind receives commands via a Unix socket. Usually, it opens a socket named .overmind.sock in a working directory, but you can specify the full path:

$ overmind start -s path/to/socket
$ OVERMIND_SOCKET=path/to/socket overmind start

All other commands support the same flag:

$ overmind connect -s path/to/socket web
$ overmind restart -s path/to/socket sidekiq
$ overmind kill -s path/to/socket

Using TCP network

Overmind can bind its command center to a TCP address instead of Unix socket. This is useful when you run it on a remote machine.

$ overmind start -s "0.0.0.0:4321" -S "tcp"
$ OVERMIND_SOCKET="0.0.0.0:4321" OVERMIND_NETWORK="tcp" overmind start

You need to pass the same flags to other commands:

$ overmind connect -s "0.0.0.0:4321" -S "tcp" web

Specifying tmux config

Overmind can use a specified tmux config. This is useful if you want to differentiate from your main tmux window, for example adding a custom status line for Overmind or a different prefix key.

overmind start -F ~/overmind.tmux.conf
OVERMIND_TMUX_CONFIG=~/.overmind.tmux.conf overmind start

Known issues

Overmind uses the system Ruby/Node/etc instead of a custom-defined one

This may happen if your Ruby/Node/etc version manager isn't configured properly. Make sure that the path to your custom binaries is included in your PATH before the system binaries path.

Overmind does not stop the Docker process properly

Unfortunately, this is how Docker works. When you send SIGINT to a docker run ... process, it just detaches container and exits. You can solve this by using named containers and signal traps:

mydocker: trap 'docker stop mydocker' EXIT > /dev/null; docker run --name mydocker ...

Overmind can't start because of a bind: invalid argument error

All operating systems have limits on Unix socket path length. Try to use a shorter socket path.

Overmind exits after pg_ctl --wait start and keeps PostgreSQL server running

Since version 12.0 pg_ctl --wait start exits right after starting the server. Just use the postgres command directly.

Author

Sergey "DarthSim" Aleksandrovich

Highly inspired by Foreman.

Many thanks to @antiflasher for the awesome logo.

License

Overmind is licensed under the MIT license.

See LICENSE for the full license text.