Skip to content

1A. Kasa File Installation

Jump to bottom
David Gutheinz edited this page Dec 5, 2021 · 3 revisions

Installing the Application and Driver Files into Hubitat Environment

  1. Install the Kasa Devices. Install the devices using the Manufacturer's instructions and the Kasa Application.

  2. Assign Static IP Address: For each device, assign a Static (or Reserved) IP address on your LAN. This precludes the IP from being changed and causing communications problems.

Installing the files

  1. **File Installation into Hubitat": See the following section of this Wiki: https://github.com/DaveGut/HubitatActive/wiki/Hubitat-App-and-Driver-File-Installation

  2. Device Drivers: The driver file links are contained below:

  3. Application File: https://raw.githubusercontent.com/DaveGut/HubitatActive/master/KasaDevices/Application/KasaIntegrationApp.groovy

Next: Installing the Devices through the Application:
Application Description:

Clone this wiki locally