New feature:

1. C++ shared object (.so) with Neon SIMD for Python is runnable on Unix (Ventura 13.3) and Linux (Ubuntu Linux 22.04.02) System. Super fast using -O3
2. C++ .so with Pybind11 for Python

Fastest Image Pattern Matching

The best template matching implementation on the Internet.

Using C++/MFC/OpenCV to build a Normalized Cross Corelation-based image alignment algorithm

The result means the similarity of two images, and the formular is as followed:

Improvements

1. rotation invariant, and rotation precision is as high as possible

2. using image pyrimid as a searching strategy to speed up 4~128 times the original NCC method (depending on template size), minimizing the inspection area on the top level of image pyrimid

3. optimizing rotation time comsuming from OpenCV by setting needed "size" and modifying rotation matrix

4. SIMD version of image convolution (especially useful for large templates)

   4.1 update Neon SIMD on MacOS version .so, super fast

5. optimizing the function GetNextMaxLoc () with struct s_BlockMax, for special cases whose template sizes are extremely smaller than source sizes, and for large TargetNumber.

   It gets quite far.

   Test case: Src10 (3648 X 3648) and Dst10 (54 X 54)

   Effect: time consuming reduces from 534 ms to 100 ms. speed up 434%

In Comparison with commercial libraries

Inspection Image : 4024 X 3036

Template Image: 762 X 521

Library	Index	Score	Angle	PosX	PosY	Execution Time
My Tool	0	1	0.046	1725.857	1045.433	76ms 🎖️
My Tool	1	0.998	-119.979	2662.869	1537.446
My Tool	2	0.991	120.150	1768.936	2098.494
Cognex	0	1	0.030	1725.960	1045.470	125ms
Cognex	1	0.989	-119.960	2663.750	1538.040
Cognex	2	0.983	120.090	1769.250	2099.410
Aisys	0	1	0	1726.000	1045.500	202ms
Aisys	1	0.990	-119.935	2663.630	1539.060
Aisys	2	0.979	120.000	1769.63	2099.780

note: if you want to get a best performance, please make sure you are using release verson (both this project and OpenCV dll). That's because O2-related settings significantly affects efficiency, and the difference of Debug and Release can up to 7 times for some cases.

Tests (with I7-10700)

test0 - with user interface

test1 (164ms 80ms (SIMD version), TargetNum=5, Overlap=0.8, Score=0.8, Tolerance Angle=180)

test2 (237 ms, 175ms (SIMD Version))

test3 (152 ms, 100ms (SIMD Version))

test4 (21 ms, Target Number=38, Score=0.8, Tolerance Angle=0, Min Reduced Area=256)

test5 (27 ms)

test6 (1157ms, 657ms (SIMD Version), Target Number=15, Score=0.8, Tolerance Angle=180, Min Reduced Area=256)

test7 (18ms, TargetNum=100, Score=0.5, Tolerance Angle=0, MaxOverlap=0.5, Min Reduced Area=1024)

Steps to build this project

1. Download Visual Studio 2017 or newer versions
2. Check on the option of "x86 and x64 version of C++ MFC"
3. Install
4. Open MatchTool.vcxproj
5. Upgrade if it is required
6. Open this project's property page
7. Modified "General-Output Directory" to the .exe directory you want (usually the directory where your opencv_worldXX.dll locates)
8. Choose the SDK version you have in "General-Windows SDK Version"
9. Choose the right toolset you have in "General-Platform Toolset" (for me, it is Visual Studio 2017 (v141))
10. Go to "VC++ Directories", and type in "Include Directories" for your own OpenCV (e.g. C:\OpenCV3.1\opencv\build\include or C:\OpenCV4.0\opencv\build\include)
11. Type in "Library Directories" for your own OpenCV's library path (the directory where your opencv_worldXX.lib locates)
12. Go to "Linker-Input", and type in library name (e.g. opencv_world310d_vs2017.lib or opencv_world401d.lib)
13. Make sure that your opencv_worldXX.dll and MatchTool.Lang are in the same directory as .exe of this project

Adaptation for OpenCV4.X

1.Select Debug_4.X or Release_4.X in "Solution Configuration"

2.Do step 10~12 in previous section

Usage of this project

1. Select the Language you want
2. Drag Source Image to the Left Area
3. Drag Dst Image to the Right Top Area
4. Push "Execute Button"

Parameters Setting

1. Target Number: possible max objects you want to find in the inspection image
2. Max OverLap Ratio: (the overlap area between two findings) / area of golden sample
3. Score (Similarity): accepted similarity of findings (0~1), lower score causes more execution time
4. Tolerance Angle: possible rotation of targets in the inspection image (180 means search range is from -180~180), higher angle causes more execution time or you can push "↓" button to select 2 angle range
5. Min Reduced Area: the min area of toppest level in image pyrimid (trainning stage)

About outputs

1. results are sorted by score (decreasing order)
2. Angles: inspected rotation of findings
3. PosX, PosY: pixel position of findings

Demonstration Video

youtube link

This project can also be used as Optical Character Recognition (OCR)

youtube link

Special Items

contact information: dennisliu1993@gmail.com

1. C++ shared library (.so) for python (Unix-ARM64, Ubuntu 22.04.02-ARM64)
2. C++/MFC dll for .Net framework (Windows)
3. pure C++ dll for Python (Windows)
4. pybind11 .so

Reference Papers

1. Template Matching using Fast Normalized Cross Correlation
2. computers_and_electrical_engineering_an_accelerating_cpu_based_correlation-based_image_alignment

Special Note:

If you encounter an error(exception) on the constructor of opencv class "RotatedRect", modify the content in types.cpp: this might due to Windows updates

RotatedRect::RotatedRect(const Point2f& _point1, const Point2f& _point2, const Point2f& _point3)
{
    Point2f _center = 0.5f * (_point1 + _point3);
    Vec2f vecs[2];
    vecs[0] = Vec2f(_point1 - _point2);
    vecs[1] = Vec2f(_point2 - _point3);
    double x = std::max(norm(_point1), std::max(norm(_point2), norm(_point3)));
    double a = std::min(norm(vecs[0]), norm(vecs[1]));
    // check that given sides are perpendicular
    // this is the line you need to modify
    CV_Assert( std::fabs(vecs[0].ddot(vecs[1])) * a <= FLT_EPSILON * 9 * x * (norm(vecs[0]) * norm(vecs[1])) );

    // wd_i stores which vector (0,1) or (1,2) will make the width
    // One of them will definitely have slope within -1 to 1
    int wd_i = 0;
    if( std::fabs(vecs[1][1]) < std::fabs(vecs[1][0]) ) wd_i = 1;
    int ht_i = (wd_i + 1) % 2;

    float _angle = std::atan(vecs[wd_i][1] / vecs[wd_i][0]) * 180.0f / (float) CV_PI;
    float _width = (float) norm(vecs[wd_i]);
    float _height = (float) norm(vecs[ht_i]);

    center = _center;
    size = Size2f(_width, _height);
    angle = _angle;
}

modify threshold value of CV_Assert line to a bigger one

then recompile the source code