Version 3.5.4

Compatible versions:

• DuetSoftwareFramework 3.5.4
• RepRapFirmware 3.5.4

Bug fixes:

• Fixed minimum value for extrusion factor inputs
• Fixed "Add spindle RPM" functiionality

Version 3.6.0-beta.2

New features:

• Added back wide-band option to IS plugin
• Enable comment toggling with Ctrl+/

Bug fixes:

• Fixed minimum for extrusion factor inputs
• Fixed "Indent Comments" and "GCode Reference" buttons when editing G-code

Version 3.6.0-beta.1

New features:

• Merged tabs for integrated and external plugins into single list
• Moved connector and syntax highlighting files to separate libraries

Changed behaviour:

• DWC should reload itself automatically when a DSF version change is detected

Version 3.5.3

Compatible versions:

• DuetSoftwareFramework 3.5.3
• RepRapFirmware 3.5.3

New features:

• Password for protected machines can be saved (thanks @Infraviored)
• Triggered endstops are displayed in CNC mode as well
• CAN address of expansion boards is shown in the electronics list

Bug fixes:

• tools[].retraction wasn't part of the object model

Version 3.5.3-rc.1

New features:

• CAN address of expansion board is displayed in the electronics panel in the settings

Bug fixes:

• Axes with triggered endstops were not displayed the status panel in CNC mode
• Improved check for incompatible versions

Version 3.5.2

Compatible versions:

• DuetSoftwareFramework 3.5.2
• RepRapFirmware 3.5.2

New features:

• Various improvements in the syntax highlighting files
• Made delay between AJAX retries configurable, reduced default delay from 2s to 200ms, and made standalone mode connecto to retry on CONN_RST

Changed behaviour:

• Modified when G-code reply is queried (only on HTTP status 503) and reworked
• Try to use inofficial location.reload(true) call (might help with DWC reloads after updates)

Bug fixes:

• "Show all layers" wasn't visible after the second layer (only after the 30th layer)
• Fixed version check for prereleases
• Fixed custom precision of Z coordinates
• Map handling in the Object Model Browser wasn't working
• Fixed bad E-STOP animations on msgbox changes
• Warning or error message about incompatible software versions could show up while updating expansion board firmware

Version 3.5.2-rc.1

Compatible versions:

• DuetSoftwareFramework 3.5.2-rc.1
• RepRapFirmware 3.5.2-rc.1

Changed behaviour:

• Try to use inofficial location.reload(true) call when reloading the UI to avoid cache issues
• Retry AJAX requests after delay on CONN_RST in standalone mode

New features:

• Made delay between AJAX retries configurable and reduced default from 2s to 200ms

Bug fixes:

• Fixed bad E-STOP animations on msgbox changes
• Map handling in the Object Model Browser was broken
• Improved G-code syntax highlighting
• "Show all layers" option was only shown after the 30th layer
• Fixed custom precision of Z coordinates
• Fixed version check for prereleases

Version 3.5.1

There have been no changes since v3.5.0, so here the full changelog since v3.4.6:

Compatible versions:

• DuetSoftwareFramework 3.5.1
• RepRapFirmware 3.5.1

Upgrade notes:

• Accelerometer plugin is no longer included, so a warning on first load may show up. Use the Input Shaping plugin instead
• Internet Explorer 11 and probably older iOS/Safari versions are no longer supported
• It is highly improbable that plugins built for DWC v3.4 can be loaded with v3.5 due to an upgrade from Webpack 4 to 5
• All external DWC plugins targeting v3.4 will NOT work with v3.5

API changes:

• Added "auto-major" version placeholder to plugin buidl script to reference e.g. 3.5 instead of 3.5.0
• Internal download action has got an extra parameter to flag if the file may be downloaded from the root web directory
• External plugins in src/plugins are automatically included so they can be added as git submodules (but not when DWC core is built)
• Added automatic import support for dwc-src subdirectory in plugin folders (preferred alternative to src)
• Added new Vuex machine action to perform custom HTTP requests for third-party plugins
• Users can now provide custom translation strings in the format <i18n.key>#arg1(#arg2...)# from RRF (echo, M291, etc)

New features:

• Files ending with .g.bak are now displayed with syntax highlighting
• E-STOP button can now be used even when a message box is open
• Syntax highlighting for menu files and board.txt file used on STM32 (thanks jaysuk)
• Support for HTTP session keys instandalone mode so the G-code reply shows up on all sessions from a single IP address
• Addition of new button to indent comments following G/M/T-codes in G-code files
• Introduced new setting to enable/disable the webcam using a switch
• Added Dutch translations
• Input shaping profiles show damping factor in list if applicable
• Code editor shows ruler at column 255 to indicate maximum G-code length
• Added support for recursive delete operations
• Implemented new dialog informing users about incompatible software versions (may be disabled in the settings)
• Added new context menu action to duplicate filaments (only applicable to config.g, load.g, and unload.g)
• Dark theme and locale is applied depending on system settings on first DWC load
• Warning message is shown if no more than 5% free space is available upon connecting
• All software versions are enumerated on the Machine Settings page
• Ported every component to TypeScript
• Moved over to the new @duet3d/objectmodel TypeScript definition of the object model
• Upgraded all packages except Vue 2 and ChartJS to the latest versions (including Webpack 5)
• Multiple bed heaters can be grouped as a single one using a new machine-specific setting
• Added missing translations where applicable using i18n-ally
• Added new setting to customize auto-switching to the Job Status page on job start (thanks MintyTrebor)
• Added extrusion rate / volumetric flow rate (toggling between is possible by clicking on the label)
• Message boxes with confirmation can be dismissed again globally
• Added build time to the hover title of the Duet Web Control version on the settings page

Changed behaviour:

• Installing DuetWebControl.bin is no longer supported due to incompatibilities with new SBC update code M997 S2 (Bookworm-based DuetPi only)
• When RRF plugins containing daemon.g are updated, that file is renamed to daemon.g.bak instead of deleting it
• Previously reset faulted heaters no longer require a countdown
• Monaco editor is automatically disabled on mobile devices due to touch incompatibilities
• Auto-completion is disabled in the Monaco editor
• Local storage is automatically cleared if full
• Update object cancel dialogs to clearly define the action
• Error dialog is shown if the software versions are incompatible (major/minor version mismatch)
• Warning notification is shown if not all software versions are equal (patch version mismatch)
• Moved plugin menu items to the Plugins category
• Removed M561 option from compensation menu
• Replaced previous code editor with Monaco (same component as in VS Code) including new G-code highlighting
• Tools, beds, and chambers can be grouped as single items
• Added several new icons to the tools panel
• Plugins are loaded asynchronously to improve initial loading speed drastically especially in standalone mode
• In SBC mode dsf-update.zip containing .debs or single .deb files can be uploaded if RootPluginSupport is enabled in config.json
• When a start-up error occurs, it is now displayed as a notification and log item upon (re-)connect
• Volumetric flow is displayed by default in FFF mode
• "Connecting..." dialog is no longer persistent in PWA mode in case third-party plugins offer extra functionality
• When a file has been simulated, instead of simulating the file again the file can be started instead

Bug fixes:

• Fixed spurious JS error messages in the console caused by items in the tool/heater list
• Colons in filenames could result in file operation errors
• File edit dialog no longer asked for confirmation when closing after changes
• Downgraded monaco code editor due to incompatibilities with Chromium on Debian Buster
• Version check was partially broken in the install plugin dialog
• Upload button in mobile view was not round
• Code editor was not focused automatically when the editor opened
• Fixed alignment of axis position label in msgbox
• Fixed rendering bug affecting hangprinter anchors
• Fixed support for boards[].wifiFirmwareFileNameUpdating
• move.axes can be queried sequentially to support up to 30 configured axes
• Refreshing the G-code filelist with only 1-2 files could lead to occasional update stalls
• Object model browser did not display referenced <see cref="..."/> properties
• M291 S4 with too many choices created a button row that did not wrap
• Fixed minor gap between babystep buttons on certain screen sizes
• daemon.g is renamed to daemon.g.bak before it is uploaded
• Added some margin between the print control buttons
• Temperature chart may update only once per second which hopefully addresses unexpected slow-downs
• Input shaping plugin required invisible axes to be homed as well
• DuetAPI.xml (OM browser reference) is downloaded as a plain file from the root web directory
• Added back missing code editor features like Ctrl+F search and F1 overlay
• Fixed syntax highlighting of variable names starting with capital letters
• File lists no longer refresh automatically while multi-file uploads are in progress
• Reset prompt did not show up if the machine remains halted
• Download as CSV/Text wasn't working under certain circumstances
• Fixed sorting in filaments dialog
• Fixed workplace number index in CNC UI
• Automatic saving of G/M/T codes from input fields was not working under certain conditions
• Fixed syntax highlighting for repeated G2/G3 codes (Fanuc-style) and for T-1
• OSK could overlap on the editor
• Filename parsing of damping factor was only partially working in the input shaping plugin (since 3.5.0-beta.3)
• Profile list of IS plugin could become excessively large
• Improved error handling if saving to local storage is not supported
• Fixed minimum of damping factor input in IS plugin
• Pause/Cancel buttons were not disabled when cancelling a print
• Default message box value was not updated correctly
• Minor fixes in the G-code syntax highlighting
• Input shaping selection with multiple boards was not working
• Line numbers could be truncated in very large files
• Thumbnail cache of subdirectories was cleared on refresh
• File list would not load completely if a file was deleted while fileinfo was obtained
• Fixed tool fan on the Job Status page
• Fixed control of bed and chamber heaters with diverging heater/slot numbers
• Fixed spurious G-code hangs in standalone mode
• Fixed display of driver IDs in the object model browser
• Message box for OK-only did not send M292
• Extra sensor options did not relate to correct indices
• default property of message boxes did not allow correct type changes (e.g int -> string)
• Error messages could start with two "Error" prefixes
• CNC movement panel did nnot display correct feedrates
• Fixed axis position display in CNC mode
• It is no longer necessary to run newer NodeJS versions with the --openssl-legacy-provider option
• Changed text color of the selected node in the object model browser to white in dark mode

Version 3.5.0

Compatible versions:

• DuetSoftwareFramework 3.5.0
• RepRapFirmware 3.5.0

Upgrade notes:

• Accelerometer plugin is no longer included, so a warning on first load may show up. Use the Input Shaping plugin instead
• Internet Explorer 11 and probably older iOS/Safari versions are no longer supported
• It is highly improbable that plugins built for DWC v3.4 can be loaded with v3.5 due to an upgrade from Webpack 4 to 5
• All external DWC plugins targeting v3.4 will NOT work with v3.5

API changes:

• Added "auto-major" version placeholder to plugin buidl script to reference e.g. 3.5 instead of 3.5.0
• Internal download action has got an extra parameter to flag if the file may be downloaded from the root web directory
• External plugins in src/plugins are automatically included so they can be added as git submodules (but not when DWC core is built)
• Added automatic import support for dwc-src subdirectory in plugin folders (preferred alternative to src)
• Added new Vuex machine action to perform custom HTTP requests for third-party plugins
• Users can now provide custom translation strings in the format <i18n.key>#arg1(#arg2...)# from RRF (echo, M291, etc)

New features:

• Files ending with .g.bak are now displayed with syntax highlighting
• E-STOP button can now be used even when a message box is open
• Syntax highlighting for menu files and board.txt file used on STM32 (thanks jaysuk)
• Support for HTTP session keys instandalone mode so the G-code reply shows up on all sessions from a single IP address
• Addition of new button to indent comments following G/M/T-codes in G-code files
• Introduced new setting to enable/disable the webcam using a switch
• Added Dutch translations
• Input shaping profiles show damping factor in list if applicable
• Code editor shows ruler at column 255 to indicate maximum G-code length
• Added support for recursive delete operations
• Implemented new dialog informing users about incompatible software versions (may be disabled in the settings)
• Added new context menu action to duplicate filaments (only applicable to config.g, load.g, and unload.g)
• Dark theme and locale is applied depending on system settings on first DWC load
• Warning message is shown if no more than 5% free space is available upon connecting
• All software versions are enumerated on the Machine Settings page
• Ported every component to TypeScript
• Moved over to the new @duet3d/objectmodel TypeScript definition of the object model
• Upgraded all packages except Vue 2 and ChartJS to the latest versions (including Webpack 5)
• Multiple bed heaters can be grouped as a single one using a new machine-specific setting
• Added missing translations where applicable using i18n-ally
• Added new setting to customize auto-switching to the Job Status page on job start (thanks MintyTrebor)
• Added extrusion rate / volumetric flow rate (toggling between is possible by clicking on the label)
• Message boxes with confirmation can be dismissed again globally
• Added build time to the hover title of the Duet Web Control version on the settings page

Changed behaviour:

• Installing DuetWebControl.bin is no longer supported due to incompatibilities with new SBC update code M997 S2 (Bookworm-based DuetPi only)
• When RRF plugins containing daemon.g are updated, that file is renamed to daemon.g.bak instead of deleting it
• Previously reset faulted heaters no longer require a countdown
• Monaco editor is automatically disabled on mobile devices due to touch incompatibilities
• Auto-completion is disabled in the Monaco editor
• Local storage is automatically cleared if full
• Update object cancel dialogs to clearly define the action
• Error dialog is shown if the software versions are incompatible (major/minor version mismatch)
• Warning notification is shown if not all software versions are equal (patch version mismatch)
• Moved plugin menu items to the Plugins category
• Removed M561 option from compensation menu
• Replaced previous code editor with Monaco (same component as in VS Code) including new G-code highlighting
• Tools, beds, and chambers can be grouped as single items
• Added several new icons to the tools panel
• Plugins are loaded asynchronously to improve initial loading speed drastically especially in standalone mode
• In SBC mode dsf-update.zip containing .debs or single .deb files can be uploaded if RootPluginSupport is enabled in config.json
• When a start-up error occurs, it is now displayed as a notification and log item upon (re-)connect
• Volumetric flow is displayed by default in FFF mode
• "Connecting..." dialog is no longer persistent in PWA mode in case third-party plugins offer extra functionality
• When a file has been simulated, instead of simulating the file again the file can be started instead

Bug fixes:

• Fixed spurious JS error messages in the console caused by items in the tool/heater list
• Colons in filenames could result in file operation errors
• File edit dialog no longer asked for confirmation when closing after changes
• Downgraded monaco code editor due to incompatibilities with Chromium on Debian Buster
• Version check was partially broken in the install plugin dialog
• Upload button in mobile view was not round
• Code editor was not focused automatically when the editor opened
• Fixed alignment of axis position label in msgbox
• Fixed rendering bug affecting hangprinter anchors
• Fixed support for boards[].wifiFirmwareFileNameUpdating
• move.axes can be queried sequentially to support up to 30 configured axes
• Refreshing the G-code filelist with only 1-2 files could lead to occasional update stalls
• Object model browser did not display referenced <see cref="..."/> properties
• M291 S4 with too many choices created a button row that did not wrap
• Fixed minor gap between babystep buttons on certain screen sizes
• daemon.g is renamed to daemon.g.bak before it is uploaded
• Added some margin between the print control buttons
• Temperature chart may update only once per second which hopefully addresses unexpected slow-downs
• Input shaping plugin required invisible axes to be homed as well
• DuetAPI.xml (OM browser reference) is downloaded as a plain file from the root web directory
• Added back missing code editor features like Ctrl+F search and F1 overlay
• Fixed syntax highlighting of variable names starting with capital letters
• File lists no longer refresh automatically while multi-file uploads are in progress
• Reset prompt did not show up if the machine remains halted
• Download as CSV/Text wasn't working under certain circumstances
• Fixed sorting in filaments dialog
• Fixed workplace number index in CNC UI
• Automatic saving of G/M/T codes from input fields was not working under certain conditions
• Fixed syntax highlighting for repeated G2/G3 codes (Fanuc-style) and for T-1
• OSK could overlap on the editor
• Filename parsing of damping factor was only partially working in the input shaping plugin (since 3.5.0-beta.3)
• Profile list of IS plugin could become excessively large
• Improved error handling if saving to local storage is not supported
• Fixed minimum of damping factor input in IS plugin
• Pause/Cancel buttons were not disabled when cancelling a print
• Default message box value was not updated correctly
• Minor fixes in the G-code syntax highlighting
• Input shaping selection with multiple boards was not working
• Line numbers could be truncated in very large files
• Thumbnail cache of subdirectories was cleared on refresh
• File list would not load completely if a file was deleted while fileinfo was obtained
• Fixed tool fan on the Job Status page
• Fixed control of bed and chamber heaters with diverging heater/slot numbers
• Fixed spurious G-code hangs in standalone mode
• Fixed display of driver IDs in the object model browser
• Message box for OK-only did not send M292
• Extra sensor options did not relate to correct indices
• default property of message boxes did not allow correct type changes (e.g int -> string)
• Error messages could start with two "Error" prefixes
• CNC movement panel did nnot display correct feedrates
• Fixed axis position display in CNC mode
• It is no longer necessary to run newer NodeJS versions with the --openssl-legacy-provider option
• Changed text color of the selected node in the object model browser to white in dark mode

Version 3.5.0-rc.4

Compatible versions:

• DuetSoftwareFramework 3.5.0-rc.4
• RepRapFirmware 3.5.0-rc.4

API changes:

• Added "auto-major" version placeholder to plugin buidl script to reference e.g. 3.5 instead of 3.5.0

New features:

• Files ending with .g.bak are now displayed with syntax highlighting
• E-STOP button can now be used even when a message box is open

Changed behaviour:

• Installing DuetWebControl.bin is no longer supported due to incompatibilities with new SBC update code M997 S2 (Bookworm-based DuetPi only)

Bug fixes:

• Fixed spurious JS error messages in the console caused by items in the tool/heater list
• Colons in filenames could result in file operation errors
• File edit dialog no longer asked for confirmation when closing after changes
• Downgraded monaco code editor due to incompatibilities with Chromium on Debian Buster
• Version check was partially broken in the install plugin dialog
• Upload button in mobile view was not round
• Code editor was not focused automatically when the editor opened
• Fixed alignment of axis position label in msgbox
• Fixed rendering bug affecting hangprinter anchors
• Fixed support for boards[].wifiFirmwareFileNameUpdating
• move.axes can be queried sequentially to support up to 30 configured axes
• Refreshing the G-code filelist with only 1-2 files could lead to occasional update stalls
• Object model browser did not display referenced <see cref="..."/> properties