Add files via upload

CMakeLists.txt

@@ -0,0 +1,198 @@
+cmake_minimum_required(VERSION 2.8.3)
+project(flashgo)
+
+## Find catkin macros and libraries
+## if COMPONENTS list like find_package(catkin REQUIRED COMPONENTS xyz)
+## is used, also find other catkin packages
+find_package(catkin REQUIRED COMPONENTS
+  rosconsole
+  roscpp
+  sensor_msgs
+)
+
+## System dependencies are found with CMake's conventions
+# find_package(Boost REQUIRED COMPONENTS system)
+
+
+## Uncomment this if the package has a setup.py. This macro ensures
+## modules and global scripts declared therein get installed
+## See http://ros.org/doc/api/catkin/html/user_guide/setup_dot_py.html
+# catkin_python_setup()
+
+################################################
+## Declare ROS messages, services and actions ##
+################################################
+
+## To declare and build messages, services or actions from within this
+## package, follow these steps:
+## * Let MSG_DEP_SET be the set of packages whose message types you use in
+##   your messages/services/actions (e.g. std_msgs, actionlib_msgs, ...).
+## * In the file package.xml:
+##   * add a build_depend tag for "message_generation"
+##   * add a build_depend and a run_depend tag for each package in MSG_DEP_SET
+##   * If MSG_DEP_SET isn't empty the following dependency has been pulled in
+##     but can be declared for certainty nonetheless:
+##     * add a run_depend tag for "message_runtime"
+## * In this file (CMakeLists.txt):
+##   * add "message_generation" and every package in MSG_DEP_SET to
+##     find_package(catkin REQUIRED COMPONENTS ...)
+##   * add "message_runtime" and every package in MSG_DEP_SET to
+##     catkin_package(CATKIN_DEPENDS ...)
+##   * uncomment the add_*_files sections below as needed
+##     and list every .msg/.srv/.action file to be processed
+##   * uncomment the generate_messages entry below
+##   * add every package in MSG_DEP_SET to generate_messages(DEPENDENCIES ...)
+
+## Generate messages in the 'msg' folder
+# add_message_files(
+#   FILES
+#   Message1.msg
+#   Message2.msg
+# )
+
+## Generate services in the 'srv' folder
+# add_service_files(
+#   FILES
+#   Service1.srv
+#   Service2.srv
+# )
+
+## Generate actions in the 'action' folder
+# add_action_files(
+#   FILES
+#   Action1.action
+#   Action2.action
+# )
+
+## Generate added messages and services with any dependencies listed here
+# generate_messages(
+#   DEPENDENCIES
+#   sensor_msgs
+# )
+
+################################################
+## Declare ROS dynamic reconfigure parameters ##
+################################################
+
+## To declare and build dynamic reconfigure parameters within this
+## package, follow these steps:
+## * In the file package.xml:
+##   * add a build_depend and a run_depend tag for "dynamic_reconfigure"
+## * In this file (CMakeLists.txt):
+##   * add "dynamic_reconfigure" to
+##     find_package(catkin REQUIRED COMPONENTS ...)
+##   * uncomment the "generate_dynamic_reconfigure_options" section below
+##     and list every .cfg file to be processed
+
+## Generate dynamic reconfigure parameters in the 'cfg' folder
+# generate_dynamic_reconfigure_options(
+#   cfg/DynReconf1.cfg
+#   cfg/DynReconf2.cfg
+# )
+
+###################################
+## catkin specific configuration ##
+###################################
+## The catkin_package macro generates cmake config files for your package
+## Declare things to be passed to dependent projects
+## INCLUDE_DIRS: uncomment this if you package contains header files
+## LIBRARIES: libraries you create in this project that dependent projects also need
+## CATKIN_DEPENDS: catkin_packages dependent projects also need
+## DEPENDS: system dependencies of this project that dependent projects also need
+catkin_package(
+#  INCLUDE_DIRS include
+#  LIBRARIES flashgo
+#  CATKIN_DEPENDS rosconsole roscpp sensor_msgs
+#  DEPENDS system_lib
+)
+
+###########
+## Build ##
+###########
+
+## Specify additional locations of header files
+## Your package locations should be listed before other locations
+# include_directories(include)
+include_directories(
+  ${catkin_INCLUDE_DIRS}/src
+)
+
+## Declare a C++ library
+# add_library(flashgo
+#   src/${PROJECT_NAME}/flashgo.cpp
+# )
+
+## Add cmake target dependencies of the library
+## as an example, code may need to be generated before libraries
+## either from message generation or dynamic reconfigure
+# add_dependencies(flashgo ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})
+
+## Declare a C++ executable
+# add_executable(flashgo_node src/flashgo_node.cpp)
+
+add_executable(flashgo_node src/flashgo_node.cpp  src/flashgo.cpp)
+add_executable(flashgo_client src/flashgo_client.cpp)
+
+## Add cmake target dependencies of the executable
+## same as for the library above
+# add_dependencies(flashgo_node ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})
+
+## Specify libraries to link a library or executable target against
+# target_link_libraries(flashgo_node
+#   ${catkin_LIBRARIES}
+# )
+
+target_link_libraries(flashgo_node
+   ${catkin_LIBRARIES}
+ )
+target_link_libraries(flashgo_client
+   ${catkin_LIBRARIES}
+ )
+
+#############
+## Install ##
+#############
+
+# all install targets should use catkin DESTINATION variables
+# See http://ros.org/doc/api/catkin/html/adv_user_guide/variables.html
+
+## Mark executable scripts (Python etc.) for installation
+## in contrast to setup.py, you can choose the destination
+# install(PROGRAMS
+#   scripts/my_python_script
+#   DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+# )
+
+## Mark executables and/or libraries for installation
+# install(TARGETS flashgo flashgo_node
+#   ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+# )
+
+## Mark cpp header files for installation
+# install(DIRECTORY include/${PROJECT_NAME}/
+#   DESTINATION ${CATKIN_PACKAGE_INCLUDE_DESTINATION}
+#   FILES_MATCHING PATTERN "*.h"
+#   PATTERN ".svn" EXCLUDE
+# )
+
+## Mark other files for installation (e.g. launch and bag files, etc.)
+# install(FILES
+#   # myfile1
+#   # myfile2
+#   DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
+# )
+
+#############
+## Testing ##
+#############
+
+## Add gtest based cpp test target and link libraries
+# catkin_add_gtest(${PROJECT_NAME}-test test/test_flashgo.cpp)
+# if(TARGET ${PROJECT_NAME}-test)
+#   target_link_libraries(${PROJECT_NAME}-test ${PROJECT_NAME})
+# endif()
+
+## Add folders to be run by python nosetests
+# catkin_add_nosetests(test)

README.md

@@ -1,2 +1,29 @@
-# flashgo
-The driver of Flash Lidar for ROS
+FLASH LIDAR ROS package
+=====================================================================
+
+ROS node and test application for FLASH LIDAR
+
+Visit EAI Website for more details about FLASH LIDAR.
+
+How to build FLASH LIDAR ros package
+=====================================================================
+    1) Clone this project to your catkin's workspace src folder
+    2) Running catkin_make to build flashgo_node and flashgo_client
+
+How to run FLASH LIDAR ros package
+=====================================================================
+There're two ways to run FLASH LIDAR ros package
+
+1. Run FLASH LIDAR node and view in the rviz
+------------------------------------------------------------
+roslaunch flashgo view_lidar.launch
+
+You should see FLASH LIDAR's scan result in the rviz.
+
+2. Run FLASH LIDAR node and view using test application
+------------------------------------------------------------
+roslaunch flashgo lidar.launch
+
+rosrun flashgo flashgo_client
+
+You should see FLASH LIDAR's scan result in the console

launch/lidar.launch

@@ -0,0 +1,9 @@
+<launch>
+  <node name="flashgo_node"          pkg="flashgo"  type="flashgo_node" output="screen">
+  <param name="serial_port"         type="string" value="/dev/ttyUSB0"/>  
+  <param name="serial_baudrate"     type="int"    value="230400"/>
+  <param name="frame_id"            type="string" value="laser"/>
+  <param name="inverted"            type="bool"   value="false"/>
+  <param name="angle_compensate"    type="bool"   value="true"/>
+  </node>
+</launch>

launch/lidar.rviz

@@ -0,0 +1,128 @@
+Panels:
+  - Class: rviz/Displays
+    Help Height: 78
+    Name: Displays
+    Property Tree Widget:
+      Expanded:
+        - /Global Options1
+        - /Status1
+        - /FlashLidarLaserScan1
+      Splitter Ratio: 0.5
+    Tree Height: 413
+  - Class: rviz/Selection
+    Name: Selection
+  - Class: rviz/Tool Properties
+    Expanded:
+      - /2D Pose Estimate1
+      - /2D Nav Goal1
+    Name: Tool Properties
+    Splitter Ratio: 0.588679
+  - Class: rviz/Views
+    Expanded:
+      - /Current View1
+    Name: Views
+    Splitter Ratio: 0.5
+  - Class: rviz/Time
+    Experimental: false
+    Name: Time
+    SyncMode: 0
+    SyncSource: ""
+Visualization Manager:
+  Class: ""
+  Displays:
+    - Alpha: 0.5
+      Cell Size: 1
+      Class: rviz/Grid
+      Color: 160; 160; 164
+      Enabled: true
+      Line Style:
+        Line Width: 0.03
+        Value: Lines
+      Name: Grid
+      Normal Cell Count: 0
+      Offset:
+        X: 0
+        Y: 0
+        Z: 0
+      Plane: XY
+      Plane Cell Count: 10
+      Reference Frame: <Fixed Frame>
+      Value: true
+    - Alpha: 1
+      Autocompute Intensity Bounds: true
+      Autocompute Value Bounds:
+        Max Value: 0
+        Min Value: 0
+        Value: true
+      Axis: Z
+      Channel Name: intensity
+      Class: rviz/LaserScan
+      Color: 255; 255; 255
+      Color Transformer: AxisColor
+      Decay Time: 0
+      Enabled: true
+      Invert Rainbow: false
+      Max Color: 255; 255; 255
+      Max Intensity: 4096
+      Min Color: 0; 0; 0
+      Min Intensity: 0
+      Name: FlashLidarLaserScan
+      Position Transformer: XYZ
+      Queue Size: 1000
+      Selectable: true
+      Size (Pixels): 5
+      Size (m): 0.03
+      Style: Squares
+      Topic: /scan
+      Use Fixed Frame: true
+      Use rainbow: true
+      Value: true
+  Enabled: true
+  Global Options:
+    Background Color: 48; 48; 48
+    Fixed Frame: laser
+    Frame Rate: 30
+  Name: root
+  Tools:
+    - Class: rviz/MoveCamera
+    - Class: rviz/Interact
+      Hide Inactive Objects: true
+    - Class: rviz/Select
+    - Class: rviz/SetInitialPose
+      Topic: /initialpose
+    - Class: rviz/SetGoal
+      Topic: /move_base_simple/goal
+  Value: true
+  Views:
+    Current:
+      Class: rviz/Orbit
+      Distance: 11.1184
+      Focal Point:
+        X: -0.0344972
+        Y: 0.065886
+        Z: 0.148092
+      Name: Current View
+      Near Clip Distance: 0.01
+      Pitch: 0.615399
+      Target Frame: <Fixed Frame>
+      Value: Orbit (rviz)
+      Yaw: 5.82358
+    Saved: ~
+Window Geometry:
+  Displays:
+    collapsed: false
+  Height: 626
+  Hide Left Dock: false
+  Hide Right Dock: false
+  QMainWindow State: 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
+  Selection:
+    collapsed: false
+  Time:
+    collapsed: false
+  Tool Properties:
+    collapsed: false
+  Views:
+    collapsed: false
+  Width: 1215
+  X: 65
+  Y: 24

launch/view_lidar.launch

@@ -0,0 +1,10 @@
+<!--
+  Used for visualising lidar in action.  
+
+  It requires lidar.launch.
+ -->
+<launch>
+  <include file="$(find flashgo)/launch/lidar.launch" />
+
+  <node name="rviz" pkg="rviz" type="rviz" args="-d $(find flashgo)/launch/lidar.rviz" />
+</launch>