chore: remove mempool.postCheck

mempool/cache_test.go

@@ -67,7 +67,7 @@ func TestCacheAfterUpdate(t *testing.T) {
 			tx := types.Tx{byte(v)}
 			updateTxs = append(updateTxs, tx)
 		}
-		mempool.Update(int64(tcIndex), updateTxs, abciResponses(len(updateTxs), abci.CodeTypeOK), nil, nil)
+		mempool.Update(int64(tcIndex), updateTxs, abciResponses(len(updateTxs), abci.CodeTypeOK), nil)
 
 		for _, v := range tc.reAddIndices {
 			tx := types.Tx{byte(v)}

mempool/clist_mempool.go

@@ -33,6 +33,10 @@ type CListMempool struct {
 	height   int64 // the last block Update()'d to
 	txsBytes int64 // total size of mempool, in bytes
 
+	reserved      int   // the number of checking tx and it should be considered when checking mempool full
+	reservedBytes int64 // size of checking tx and it should be considered when checking mempool full
+	reservedMtx   sync.Mutex
+
 	// notify listeners (ie. consensus) when txs are available
 	notifiedTxsAvailable bool
 	txsAvailable         chan struct{} // fires once for each height, when the mempool is not empty
@@ -43,7 +47,6 @@ type CListMempool struct {
 	// CheckTx or ReapMaxBytesMaxGas(ReapMaxTxs) methods.
 	updateMtx sync.RWMutex
 	preCheck  PreCheckFunc
-	postCheck PostCheckFunc
 
 	wal          *auto.AutoFile // a log of mempool txs
 	txs          *clist.CList   // concurrent linked-list of good txs
@@ -118,12 +121,6 @@ func WithPreCheck(f PreCheckFunc) CListMempoolOption {
 	return func(mem *CListMempool) { mem.preCheck = f }
 }
 
-// WithPostCheck sets a filter for the mempool to reject a tx if f(tx) returns
-// false. This is ran after CheckTx.
-func WithPostCheck(f PostCheckFunc) CListMempoolOption {
-	return func(mem *CListMempool) { mem.postCheck = f }
-}
-
 // WithMetrics sets the metrics.
 func WithMetrics(metrics *Metrics) CListMempoolOption {
 	return func(mem *CListMempool) { mem.metrics = metrics }
@@ -283,9 +280,19 @@ func (mem *CListMempool) CheckTx(tx types.Tx, cb func(*abci.Response), txInfo Tx
 
 	// NOTE: proxyAppConn may error if tx buffer is full
 	if err := mem.proxyAppConn.Error(); err != nil {
+		// remove from cache
+		mem.cache.Remove(tx)
+		return err
+	}
+
+	// reserve mempool that should be called just before calling `mem.proxyAppConn.CheckTxAsync()`
+	if err := mem.reserve(int64(txSize)); err != nil {
+		// remove from cache
+		mem.cache.Remove(tx)
 		return err
 	}
 
+	// CONTRACT: `app.CheckTxAsync()` should check whether `GasWanted` is valid (0 <= GasWanted <= block.masGas)
 	reqRes := mem.proxyAppConn.CheckTxAsync(abci.RequestCheckTx{Tx: tx})
 	reqRes.SetCallback(mem.reqResCb(tx, txInfo.SenderID, txInfo.SenderP2PID, cb))
 
@@ -385,6 +392,35 @@ func (mem *CListMempool) isFull(txSize int) error {
 	return nil
 }
 
+func (mem *CListMempool) reserve(txSize int64) error {
+	mem.reservedMtx.Lock()
+	defer mem.reservedMtx.Unlock()
+
+	var (
+		memSize  = mem.Size()
+		txsBytes = mem.TxsBytes()
+	)
+
+	if memSize+mem.reserved >= mem.config.Size || txSize+mem.reservedBytes+txsBytes > mem.config.MaxTxsBytes {
+		return ErrMempoolIsFull{
+			memSize + mem.reserved, mem.config.Size,
+			txsBytes + mem.reservedBytes, mem.config.MaxTxsBytes,
+		}
+	}
+
+	mem.reserved++
+	mem.reservedBytes += txSize
+	return nil
+}
+
+func (mem *CListMempool) releaseReserve(txSize int64) {
+	mem.reservedMtx.Lock()
+	defer mem.reservedMtx.Unlock()
+
+	mem.reserved--
+	mem.reservedBytes -= txSize
+}
+
 // callback, which is called after the app checked the tx for the first time.
 //
 // The case where the app checks the tx for the second and subsequent times is
@@ -397,20 +433,7 @@ func (mem *CListMempool) resCbFirstTime(
 ) {
 	switch r := res.Value.(type) {
 	case *abci.Response_CheckTx:
-		var postCheckErr error
-		if mem.postCheck != nil {
-			postCheckErr = mem.postCheck(tx, r.CheckTx)
-		}
-		if (r.CheckTx.Code == abci.CodeTypeOK) && postCheckErr == nil {
-			// Check mempool isn't full again to reduce the chance of exceeding the
-			// limits.
-			if err := mem.isFull(len(tx)); err != nil {
-				// remove from cache (mempool might have a space later)
-				mem.cache.Remove(tx)
-				mem.logger.Error(err.Error())
-				return
-			}
-
+		if r.CheckTx.Code == abci.CodeTypeOK {
 			memTx := &mempoolTx{
 				height:    mem.height,
 				gasWanted: r.CheckTx.GasWanted,
@@ -428,11 +451,14 @@ func (mem *CListMempool) resCbFirstTime(
 		} else {
 			// ignore bad transaction
 			mem.logger.Info("Rejected bad transaction",
-				"tx", txID(tx), "peerID", peerP2PID, "res", r, "err", postCheckErr)
+				"tx", txID(tx), "peerID", peerP2PID, "res", r)
 			mem.metrics.FailedTxs.Add(1)
 			// remove from cache (it might be good later)
 			mem.cache.Remove(tx)
 		}
+
+		// release `reserve` regardless it's OK or not (it might be good later)
+		mem.releaseReserve(int64(len(tx)))
 	default:
 		// ignore other messages
 	}
@@ -453,15 +479,11 @@ func (mem *CListMempool) resCbRecheck(req *abci.Request, res *abci.Response) {
 				memTx.tx,
 				tx))
 		}
-		var postCheckErr error
-		if mem.postCheck != nil {
-			postCheckErr = mem.postCheck(tx, r.CheckTx)
-		}
-		if (r.CheckTx.Code == abci.CodeTypeOK) && postCheckErr == nil {
+		if r.CheckTx.Code == abci.CodeTypeOK {
 			// Good, nothing to do.
 		} else {
 			// Tx became invalidated due to newly committed block.
-			mem.logger.Info("Tx is no longer valid", "tx", txID(tx), "res", r, "err", postCheckErr)
+			mem.logger.Info("Tx is no longer valid", "tx", txID(tx), "res", r)
 			// NOTE: we remove tx from the cache because it might be good later
 			mem.removeTx(tx, mem.recheckCursor, true)
 		}
@@ -555,13 +577,12 @@ func (mem *CListMempool) ReapMaxTxs(max int) types.Txs {
 	return txs
 }
 
-// Lock() must be help by the caller during execution.
+// Lock() must be held by the caller during execution.
 func (mem *CListMempool) Update(
 	height int64,
 	txs types.Txs,
 	deliverTxResponses []*abci.ResponseDeliverTx,
 	preCheck PreCheckFunc,
-	postCheck PostCheckFunc,
 ) error {
 	// Set height
 	mem.height = height
@@ -570,9 +591,6 @@ func (mem *CListMempool) Update(
 	if preCheck != nil {
 		mem.preCheck = preCheck
 	}
-	if postCheck != nil {
-		mem.postCheck = postCheck
-	}
 
 	for i, tx := range txs {
 		if deliverTxResponses[i].Code == abci.CodeTypeOK {

mempool/clist_mempool_test.go

@@ -147,31 +147,22 @@ func TestMempoolFilters(t *testing.T) {
 	emptyTxArr := []types.Tx{[]byte{}}
 
 	nopPreFilter := func(tx types.Tx) error { return nil }
-	nopPostFilter := func(tx types.Tx, res *abci.ResponseCheckTx) error { return nil }
 
 	// each table driven test creates numTxsToCreate txs with checkTx, and at the end clears all remaining txs.
 	// each tx has 20 bytes + amino overhead = 21 bytes, 1 gas
 	tests := []struct {
 		numTxsToCreate int
 		preFilter      PreCheckFunc
-		postFilter     PostCheckFunc
 		expectedNumTxs int
 	}{
-		{10, nopPreFilter, nopPostFilter, 10},
-		{10, PreCheckAminoMaxBytes(10), nopPostFilter, 0},
-		{10, PreCheckAminoMaxBytes(20), nopPostFilter, 0},
-		{10, PreCheckAminoMaxBytes(22), nopPostFilter, 10},
-		{10, nopPreFilter, PostCheckMaxGas(-1), 10},
-		{10, nopPreFilter, PostCheckMaxGas(0), 0},
-		{10, nopPreFilter, PostCheckMaxGas(1), 10},
-		{10, nopPreFilter, PostCheckMaxGas(3000), 10},
-		{10, PreCheckAminoMaxBytes(10), PostCheckMaxGas(20), 0},
-		{10, PreCheckAminoMaxBytes(30), PostCheckMaxGas(20), 10},
-		{10, PreCheckAminoMaxBytes(22), PostCheckMaxGas(1), 10},
-		{10, PreCheckAminoMaxBytes(22), PostCheckMaxGas(0), 0},
+		{10, nopPreFilter, 10},
+		{10, PreCheckAminoMaxBytes(10), 0},
+		{10, PreCheckAminoMaxBytes(20), 0},
+		{10, PreCheckAminoMaxBytes(22), 10},
+		{10, PreCheckAminoMaxBytes(30), 10},
 	}
 	for tcIndex, tt := range tests {
-		mempool.Update(1, emptyTxArr, abciResponses(len(emptyTxArr), abci.CodeTypeOK), tt.preFilter, tt.postFilter)
+		mempool.Update(1, emptyTxArr, abciResponses(len(emptyTxArr), abci.CodeTypeOK), tt.preFilter)
 		checkTxs(t, mempool, tt.numTxsToCreate, UnknownPeerID)
 		require.Equal(t, tt.expectedNumTxs, mempool.Size(), "mempool had the incorrect size, on test case %d", tcIndex)
 		mempool.Flush()
@@ -186,7 +177,7 @@ func TestMempoolUpdate(t *testing.T) {
 
 	// 1. Adds valid txs to the cache
 	{
-		mempool.Update(1, []types.Tx{[]byte{0x01}}, abciResponses(1, abci.CodeTypeOK), nil, nil)
+		mempool.Update(1, []types.Tx{[]byte{0x01}}, abciResponses(1, abci.CodeTypeOK), nil)
 		err := mempool.CheckTx([]byte{0x01}, nil, TxInfo{})
 		if assert.Error(t, err) {
 			assert.Equal(t, ErrTxInCache, err)
@@ -197,15 +188,15 @@ func TestMempoolUpdate(t *testing.T) {
 	{
 		err := mempool.CheckTx([]byte{0x02}, nil, TxInfo{})
 		require.NoError(t, err)
-		mempool.Update(1, []types.Tx{[]byte{0x02}}, abciResponses(1, abci.CodeTypeOK), nil, nil)
+		mempool.Update(1, []types.Tx{[]byte{0x02}}, abciResponses(1, abci.CodeTypeOK), nil)
 		assert.Zero(t, mempool.Size())
 	}
 
 	// 3. Removes invalid transactions from the cache and the mempool (if present)
 	{
 		err := mempool.CheckTx([]byte{0x03}, nil, TxInfo{})
 		require.NoError(t, err)
-		mempool.Update(1, []types.Tx{[]byte{0x03}}, abciResponses(1, 1), nil, nil)
+		mempool.Update(1, []types.Tx{[]byte{0x03}}, abciResponses(1, 1), nil)
 		assert.Zero(t, mempool.Size())
 
 		err = mempool.CheckTx([]byte{0x03}, nil, TxInfo{})
@@ -234,7 +225,7 @@ func TestTxsAvailable(t *testing.T) {
 	// it should fire once now for the new height
 	// since there are still txs left
 	committedTxs, txs := txs[:50], txs[50:]
-	if err := mempool.Update(1, committedTxs, abciResponses(len(committedTxs), abci.CodeTypeOK), nil, nil); err != nil {
+	if err := mempool.Update(1, committedTxs, abciResponses(len(committedTxs), abci.CodeTypeOK), nil); err != nil {
 		t.Error(err)
 	}
 	ensureFire(t, mempool.TxsAvailable(), timeoutMS)
@@ -246,7 +237,7 @@ func TestTxsAvailable(t *testing.T) {
 
 	// now call update with all the txs. it should not fire as there are no txs left
 	committedTxs = append(txs, moreTxs...) //nolint: gocritic
-	if err := mempool.Update(2, committedTxs, abciResponses(len(committedTxs), abci.CodeTypeOK), nil, nil); err != nil {
+	if err := mempool.Update(2, committedTxs, abciResponses(len(committedTxs), abci.CodeTypeOK), nil); err != nil {
 		t.Error(err)
 	}
 	ensureNoFire(t, mempool.TxsAvailable(), timeoutMS)
@@ -305,7 +296,7 @@ func TestSerialReap(t *testing.T) {
 			binary.BigEndian.PutUint64(txBytes, uint64(i))
 			txs = append(txs, txBytes)
 		}
-		if err := mempool.Update(0, txs, abciResponses(len(txs), abci.CodeTypeOK), nil, nil); err != nil {
+		if err := mempool.Update(0, txs, abciResponses(len(txs), abci.CodeTypeOK), nil); err != nil {
 			t.Error(err)
 		}
 	}
@@ -489,7 +480,7 @@ func TestMempoolTxsBytes(t *testing.T) {
 	assert.EqualValues(t, 1, mempool.TxsBytes())
 
 	// 3. zero again after tx is removed by Update
-	mempool.Update(1, []types.Tx{[]byte{0x01}}, abciResponses(1, abci.CodeTypeOK), nil, nil)
+	mempool.Update(1, []types.Tx{[]byte{0x01}}, abciResponses(1, abci.CodeTypeOK), nil)
 	assert.EqualValues(t, 0, mempool.TxsBytes())
 
 	// 4. zero after Flush
@@ -534,7 +525,7 @@ func TestMempoolTxsBytes(t *testing.T) {
 	require.NotEmpty(t, res2.Data)
 
 	// Pretend like we committed nothing so txBytes gets rechecked and removed.
-	mempool.Update(1, []types.Tx{}, abciResponses(0, abci.CodeTypeOK), nil, nil)
+	mempool.Update(1, []types.Tx{}, abciResponses(0, abci.CodeTypeOK), nil)
 	assert.EqualValues(t, 0, mempool.TxsBytes())
 }
 

mempool/mempool.go

@@ -43,7 +43,6 @@ type Mempool interface {
 		blockTxs types.Txs,
 		deliverTxResponses []*abci.ResponseDeliverTx,
 		newPreFn PreCheckFunc,
-		newPostFn PostCheckFunc,
 	) error
 
 	// FlushAppConn flushes the mempool connection to ensure async reqResCb calls are
@@ -85,11 +84,6 @@ type Mempool interface {
 // transaction doesn't exceeded the block size.
 type PreCheckFunc func(types.Tx) error
 
-// PostCheckFunc is an optional filter executed after CheckTx and rejects
-// transaction if false is returned. An example would be to ensure a
-// transaction doesn't require more gas than available for the block.
-type PostCheckFunc func(types.Tx, *abci.ResponseCheckTx) error
-
 // TxInfo are parameters that get passed when attempting to add a tx to the
 // mempool.
 type TxInfo struct {
@@ -120,22 +114,3 @@ func PreCheckAminoMaxBytes(maxBytes int64) PreCheckFunc {
 		return nil
 	}
 }
-
-// PostCheckMaxGas checks that the wanted gas is smaller or equal to the passed
-// maxGas. Returns nil if maxGas is -1.
-func PostCheckMaxGas(maxGas int64) PostCheckFunc {
-	return func(tx types.Tx, res *abci.ResponseCheckTx) error {
-		if maxGas == -1 {
-			return nil
-		}
-		if res.GasWanted < 0 {
-			return fmt.Errorf("gas wanted %d is negative",
-				res.GasWanted)
-		}
-		if res.GasWanted > maxGas {
-			return fmt.Errorf("gas wanted %d is greater than max gas %d",
-				res.GasWanted, maxGas)
-		}
-		return nil
-	}
-}

mock/mempool.go

@@ -25,7 +25,6 @@ func (Mempool) Update(
 	_ types.Txs,
 	_ []*abci.ResponseDeliverTx,
 	_ mempl.PreCheckFunc,
-	_ mempl.PostCheckFunc,
 ) error {
 	return nil
 }

node/node.go

@@ -309,7 +309,6 @@ func createMempoolAndMempoolReactor(config *cfg.Config, proxyApp proxy.AppConns,
 		state.LastBlockHeight,
 		mempl.WithMetrics(memplMetrics),
 		mempl.WithPreCheck(sm.TxPreCheck(state)),
-		mempl.WithPostCheck(sm.TxPostCheck(state)),
 	)
 	mempoolLogger := logger.With("module", "mempool")
 	mempoolReactor := mempl.NewReactor(config.Mempool, mempool)

node/node_test.go

@@ -242,7 +242,6 @@ func TestCreateProposalBlock(t *testing.T) {
 		state.LastBlockHeight,
 		mempl.WithMetrics(memplMetrics),
 		mempl.WithPreCheck(sm.TxPreCheck(state)),
-		mempl.WithPostCheck(sm.TxPostCheck(state)),
 	)
 	mempool.SetLogger(logger)
 

state/execution.go

@@ -248,13 +248,7 @@ func (blockExec *BlockExecutor) Commit(
 
 	// Update mempool.
 	updateMempoolStartTime := time.Now().UnixNano()
-	err = blockExec.mempool.Update(
-		block.Height,
-		block.Txs,
-		deliverTxResponses,
-		TxPreCheck(state),
-		TxPostCheck(state),
-	)
+	err = blockExec.mempool.Update(block.Height, block.Txs, deliverTxResponses, TxPreCheck(state))
 	updateMempoolEndTime := time.Now().UnixNano()
 
 	updateMempoolTimeMs := float64(updateMempoolEndTime-updateMempoolStartTime) / 1000000

state/tx_filter.go

@@ -14,9 +14,3 @@ func TxPreCheck(state State) mempl.PreCheckFunc {
 	)
 	return mempl.PreCheckAminoMaxBytes(maxDataBytes)
 }
-
-// TxPostCheck returns a function to filter transactions after processing.
-// The function limits the gas wanted by a transaction to the block's maximum total gas.
-func TxPostCheck(state State) mempl.PostCheckFunc {
-	return mempl.PostCheckMaxGas(state.ConsensusParams.Block.MaxGas)
-}