How to add Coupler stops to main panel (Friesach)? #1924
-
Goal Question [SetterElement009] If so, what is the Type value for these two stops? Any help is highly appreciated. My setup //Jens |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 6 replies
-
No, it's not working like that. The couplers you mention is coming from the GO built in coupler panels. They are not part of the sample set as such, nor are they available as setter elements. So, to use them as if in the organ file itself (and display on a sample set panel) you'll need to create/add the two couplers first for the Schwellwerk in the odf, then you can display them on a panel by modifying the odf appropriately. As this will alter/change the original organ, I'd suggest saving it with a modified file name and ChurchName, but you do whatever you want. |
Beta Was this translation helpful? Give feedback.
Honestly, I think you'd be much better off using either GoOdf or OdfEdit when you try to modify an .organ file than trying to learn the pure text mechanics behind it. If you really want to learn the hardcore text editing necessary to make manual .organ file editing you should spend much more time to learn how the format actually works - and I'm not advocating it, you do so at your own risk and effort.
The GO version of Friesach unfortunately uses the old panel format which further complicates things as the new format is much easier to use with greater flexibility. From what I can see in the .organ file the [Coupler006] already is the same as you want for the normal coupler to the Solowerk…