At Zenoss we are working on a project to improve the reliability, performance and features of native Windows monitoring. The core of this project is this Python library for asynchronously managing Windows using the WinRM and WinRS services. This library will then be used by Zenoss to do automatic discovery and monitoring the way Zenoss users are used to with some new possibilities.
Right now we're trying to get as much real world experience using the library as possible to prove out the reliability and performance improvements we're hoping to achieve. If you have access to Windows servers, you can help! It doesn't even require a Zenoss Core installation as this tool stands alone right now.
See the zenoss-windows forum for updates to the project, and leave your feedback there.
http://community.zenoss.org/community/forums/zenoss-windows
Ubuntu Server 12.04.1 LTS (Python 2.7.3)
sudo apt-get update sudo apt-get -y install gcc python-dev libkrb5-dev krb5-user python-setuptools # if prompted for your kerberos realm, leave it blank and choose OK sudo easy_install txwinrm # if you want to use a Windows domain sudo genkrb5conf <windows domain> <domain controller IP address> # now you can run the txwinrm commands (winrm, winrs, typeperf, and wecutil)
Centos 6.3 x86_64 (Python 2.6.6)
# as root yum -y install gcc python-devel krb5-devel krb5-workstation python-setuptools easy_install txwinrm # if you want to use a Windows domain genkrb5conf <windows domain> <domain controller IP address> # now you can run the txwinrm commands (winrm, winrs, typeperf, and wecutil) as a normal user
Zenoss Core or Resource Manager 4.2.x installed on CentOS 6 (Zenoss Python 2.7)
# as root yum -y install gcc krb5-devel krb5-workstation # as the zenoss user easy_install txwinrm # as root (if you want to use a Windows domain) genkrb5conf <windows domain> <domain controller IP address> # now you can run the txwinrm commands (winrm, winrs, typeperf, and wecutil) as the zenoss user
- HTTP
- Basic authentication
- WQL queries
- WinRS
- typeperf
- Subscribe to the Windows Event Log
- Kerberos authentication (domain accounts)
- HTTPS
- NTLM authentication (local accounts)
You can enable the WinRM service on Windows Server 2003, 2008 and 2012. Run Command Prompt as Administrator and execute the following commands
winrm quickconfig
winrm s winrm/config/service '@{AllowUnencrypted="true";MaxConcurrentOperationsPerUser="4294967295"}'
winrm s winrm/config/service/auth '@{Basic="true"}'
winrm s winrm/config/winrs '@{MaxShellsPerUser="2147483647"}'
You can pass a single host a query via the command line...
$ winrm -r host -u user -f "select * from Win32_NetworkAdapter"
Another option is to create an ini-style config file and hit multiple targets with multiple queries. Example config is at examples/config.ini
$ winrm -c path/to/config.ini
This will send WinRM enumerate requests to the hosts listed in config.ini. It will send a request for each WQL query listed in that file. The output will look like
<hostname> ==> <WQL query>
<property-name> = <value>
...
---- (indicates start of next item)
<property-name> = <value>
...
...
Here is an example...
cupertino ==> Select name,caption,pathName,serviceType,startMode,startName,state From Win32_Service Caption = Application Experience Name = AeLookupSvc PathName = C:\Windows\system32\svchost.exe -k netsvcs ServiceType = Share Process StartMode = Manual StartName = localSystem State = Stopped ---- Caption = Application Layer Gateway Service Name = ALG ...
A summary of the number of failures if any and number of XML elements processed appears at the end. The summary and any errors are written to stderr, so redirect stdin to /dev/null if you want terse output.
$ winrm -c path/to/config.ini >/dev/null
Summary:
Connected to 3 of 3 hosts
Processed 13975 elements
Failed to process 0 responses
Peak virtual memory useage: 529060 kB
Remote CPU utilization:
campbell
0.00% of CPU time used by WmiPrvSE process with pid 1544
4.00% of CPU time used by WmiPrvSE#1 process with pid 1684
4.00% of CPU time used by WmiPrvSE#2 process with pid 3048
cupertino
0.00% of CPU time used by WmiPrvSE process with pid 1608
3.12% of CPU time used by WmiPrvSE#1 process with pid 1764
9.38% of CPU time used by WmiPrvSE#2 process with pid 2608
gilroy
1.08% of CPU time used by WmiPrvSE process with pid 1428
5.38% of CPU time used by WmiPrvSE#1 process with pid 1760
4.30% of CPU time used by WmiPrvSE#2 process with pid 1268
The '-a' option specifies the authentication method. Currently supported values are 'basic' and 'kerberos'. 'basic' is the default.
The '-d' option increases logging, printing out the XML for all requests and responses, along with the HTTP status code.
The winrs program has four modes of operation:
- interactive (default): Execute many commands in an interactive command prompt on the remote host
- single: Execute a single command and return its output
- long: Execute a single long-running command like 'typeperf -si 1' and check the output periodically
- batch: Opens a command prompt on the remote system and executes a list of commands (actually right now it executes one command twice as a proof-of-concept)
An example of interactive mode
$ winrs interactive -u Administrator -x 'typeperf "\Memory\Pages/sec" "\PhysicalDisk(_Total)\Avg. Disk Queue Length" "\Processor(_Total)\% Processor Time" -si 1' -r oakland Microsoft Windows [Version 6.2.9200] (c) 2012 Microsoft Corporation. All rights reserved. C:\Users\Default>dir Volume in drive C has no label. Volume Serial Number is 5E71-6BA3 Directory of C:\Users\Default 02/22/2013 03:42 AM <DIR> Contacts 02/22/2013 03:42 AM <DIR> Desktop 02/22/2013 03:42 AM <DIR> Documents 02/22/2013 03:42 AM <DIR> Downloads 02/22/2013 03:42 AM <DIR> Favorites 02/22/2013 03:42 AM <DIR> Links 02/22/2013 03:42 AM <DIR> Music 02/22/2013 03:42 AM <DIR> Pictures 02/22/2013 03:42 AM <DIR> Saved Games 02/22/2013 03:42 AM <DIR> Searches 02/22/2013 03:42 AM <DIR> Videos 0 File(s) 0 bytes 11 Dir(s) 7,905,038,336 bytes free C:\Users\Default>exit
An example of single mode
$ winrs single -u Administrator -x 'typeperf "\Memory\Pages/sec" "\PhysicalDisk(_Total)\Avg. Disk Queue Length" "\Processor(_Total)\% Processor Time" -sc 1' -r oakland
{'exit_code': 0,
'stderr': [],
'stdout': ['"(PDH-CSV 4.0)","\\\\AMAZONA-SDFU7B1\\Memory\\Pages/sec","\\\\AMAZONA-SDFU7B1\\PhysicalDisk(_Total)\\Avg. Disk Queue Length","\\\\AMAZONA-SDFU7B1\\Processor(_Total)\\% Processor Time"',
'"04/19/2013 21:43:48.823","0.000000","0.000000","0.005660"',
'Exiting, please wait...',
'The command completed successfully.']}
An example of long mode
$ winrs long -u Administrator -x 'typeperf "\Memory\Pages/sec" "\PhysicalDisk(_Total)\Avg. Disk Queue Length" "\Processor(_Total)\% Processor Time" -si 1' -r oakland "(PDH-CSV 4.0)","\\AMAZONA-SDFU7B1\Memory\Pages/sec","\\AMAZONA-SDFU7B1\PhysicalDisk(_Total)\Avg. Disk Queue Length","\\AMAZONA-SDFU7B1\Processor(_Total)\% Processor Time" "04/19/2013 21:43:10.603","0.000000","0.000000","18.462005" "04/19/2013 21:43:11.617","0.000000","0.000000","0.000464" "04/19/2013 21:43:12.631","0.000000","0.000000","1.538423" "04/19/2013 21:43:13.645","0.000000","0.000000","0.000197"
An example of batch
$ winrs batch -u Administrator -x 'typeperf "\Memory\Pages/sec" "\PhysicalDisk(_Total)\Avg. Disk Queue Length" "\Processor(_Total)\% Processor Time" -sc 1' -r oakland Creating shell on oakland. Sending to oakland: typeperf "\Memory\Pages/sec" "\PhysicalDisk(_Total)\Avg. Disk Queue Length" "\Processor(_Total)\% Processor Time" -sc 1 Received from oakland: "(PDH-CSV 4.0)","\\AMAZONA-SDFU7B1\Memory\Pages/sec","\\AMAZONA-SDFU7B1\PhysicalDisk(_Total)\Avg. Disk Queue Length","\\AMAZONA-SDFU7B1\Processor(_Total)\% Processor Time" "04/19/2013 21:43:39.198","0.000000","0.000000","0.000483" Exiting, please wait... The command completed successfully. Sending to oakland: typeperf "\Memory\Pages/sec" "\PhysicalDisk(_Total)\Avg. Disk Queue Length" "\Processor(_Total)\% Processor Time" -sc 1 Received from oakland: "(PDH-CSV 4.0)","\\AMAZONA-SDFU7B1\Memory\Pages/sec","\\AMAZONA-SDFU7B1\PhysicalDisk(_Total)\Avg. Disk Queue Length","\\AMAZONA-SDFU7B1\Processor(_Total)\% Processor Time" "04/19/2013 21:43:41.054","0.000000","0.000000","0.000700" Exiting, please wait... The command completed successfully. Deleted shell on oakland. Exit code of shell on oakland: 0
txwinrm's typeperf command allows you to run a remote typeperf command, check the output periodically, parse it, and print it to stdout. It support the -si option and multiple counters. Here is an example:
$ typeperf -r gilroy -u Administrator '\Processor(_Total)\% Processor Time' '\memory\Available Bytes' '\paging file(_Total)\% Usage' \memory\Available Bytes 00:54:27: 193130496.0 \paging file(_Total)\% Usage 00:54:27: 0.012207 \Processor(_Total)\% Processor Time 00:54:27: 0.004487 \memory\Available Bytes 00:54:28: 193216512.0 00:54:29: 193982464.0 \paging file(_Total)\% Usage 00:54:28: 0.012207 00:54:29: 0.012207 \Processor(_Total)\% Processor Time 00:54:28: 1.542879 00:54:29: 0.004487 \memory\Available Bytes 00:54:30: 193933312.0 00:54:31: 193941504.0 \paging file(_Total)\% Usage 00:54:30: 0.012207
The following command shows an example of subscribing to the Windows event log:
$ wecutil -r saratoga -u Administrator Pull #1 Event(system=System(provider='Microsoft-Windows-EventForwarder', event_id=111, event_id_qualifiers=None, level=None, task=None, keywords=None, time_created=datetime.datetime(2013, 5, 8, 20, 29, 31, 132000), event_record_id=None, channel=None, computer='saratoga.solutions.loc', user_id=None), data=None, rendering_info=None) Pull #2
You can run wecutil against a matrix of hosts and event queries by using a config file.
$ wecutil -c examples/config.ini
milpitas System/'*' pull #1 of 2
milpitas Application/'*' pull #1 of 2
gilroy System/'*' pull #1 of 2
...
milpitas System/'*' Event(system=System(provider='Microsoft-Windows-...
...
milpitas Application/'*' pull #2 of 2
...
Summary:
Connected to 4 of 4 hosts
Processed 12 events
Peak virtual memory useage: 361060 kB
Remote CPU utilization:
saratoga
0.15% of CPU time used by WmiPrvSE process with pid 1640
0.96% of CPU time used by WmiPrvSE#1 process with pid 2000
0.00% of CPU time used by WmiApSrv process with pid 604
0.07% of CPU time used by WmiPrvSE#2 process with pid 1604
gilroy
0.00% of CPU time used by WmiPrvSE process with pid 1384
0.00% of CPU time used by WmiPrvSE#1 process with pid 1684
0.00% of CPU time used by WmiApSrv process with pid 1924
0.15% of CPU time used by WmiPrvSE#2 process with pid 1348
milpitas
0.36% of CPU time used by wmiprvse process with pid 1924
1.01% of CPU time used by wmiprvse process with pid 816
berkeley
0.00% of CPU time used by WmiPrvSE process with pid 1624
0.00% of CPU time used by WmiPrvSE#1 process with pid 1744
0.00% of CPU time used by WmiApSrv process with pid 1620
0.07% of CPU time used by WmiPrvSE#2 process with pid 1280
To provide feedback on txwinrm start a discussion on the zenoss-windows forum on community.zenoss.org: http://community.zenoss.org/community/forums/zenoss-windows
Zenoss uses JIRA to track bugs. Create an account and file a bug, or browse reported bugs: http://jira.zenoss.com/jira/secure/Dashboard.jspa
As of Apr 16, 2013...
$ txwinrm/test/cover ........................ ---------------------------------------------------------------------- Ran 24 tests in 7.910s OK Name Stmts Miss Cover --------------------------------------- txwinrm/__init__ 0 0 100% txwinrm/constants 18 0 100% txwinrm/enumerate 259 46 82% txwinrm/shell 114 34 70% txwinrm/util 89 24 73% --------------------------------------- TOTAL 480 104 78%
Run txwinrm/test/precommit before merging to master. This requires that you...
easy_install flake8 easy_install coverage git clone https://github.com/dgladkov/cyclic_complexity