This is a fork of cbeam-telemetry-server, a server for connecting the NASA OpenMCT with MQTT information sources.
This fork uses a newer version of OpenMCT, which has a more refined UI. It also maps MQTT topics from the file dict/dictionaries.json and restarts the service when a file change is detected, allowing other services to modify the configuration.
In addition, mosquitto (the MQTT broker) is now configured to allow connections over WebSockets on port 9091 (along with 1883 for normal connections) and anonymous users now have read-only access. The mosquitto configuration is stored in the mosquitto/ directory.
I recommend using Docker, the following command will set-up the whole environment (might take awhile)
sudo docker-compose up --build -d
If you can't connect to OpenMCT on port 8080 then check the logs
sudo docker logs cbeam-telemetry-server
You might see an error with connecting to InfluxDB (port 8086) or something about the dict file not being accessible. In both cases a restart should do the trick.
sudo docker restart cbeam-telemetry-server
See the file dict/dictionaries.json for how to configure the MQTT mappings. Alternatively see the files under config/ if you don't want to use a json file. Then you need to change OPENMCT_CONFIG in the compose file.