Skip to content

Example for ESP32-LyraT: Passthrough Digital Audio over I²S, Baseline for Realtime DSP Applications

License

Notifications You must be signed in to change notification settings

Jeija/esp32-lyrat-passthrough

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

1 Commit
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ESP32-LyraT Audio Passthrough

Short Description

This esp-idf-based application for the ESP32-LyraT reads stereo samples from the board's analog "AUX IN" input jack and outputs them through the "PHONE JACK" analog output again. It does so without all the overhead that esp-adf brings at the cost of not being as portable as esp-adf's pipeline_passthrough.

By default, this application uses a word length of 16 bits (bits per channel) and a sample rate of 44100kHz. It first configures the ES8388 audio codec chip on the ESP32-LyraT board through I²C and then transfers digital audio samples bidirectionally over I²S.

This project can be used as a starting point for implementing digital filters such as FIR / IIR / biquad filters and other digital signal processing (DSP) applications on the ESP32 plattform. The ESP32's Tensilica Xtensa processor architecture is well-know for its DSP capabilities. For instance, FIR filters can be efficiently implemented on the ESP32 thanks to support for special 16-bit multiply-accumulate instructions with optional parallel loading (MAC16 option for Tensilica Xtensa LX6).. See esp-dsp and the Xtensa Instruction Set Architecture (ISA) Reference Manual for more information.

Build and Flash

Make sure to have a recent esp-idf version with support for cmake-based projects installed. Then compile and flash this project as usual using the following steps:

  • idf.py all to compile everything
  • Put your ESP32-LyraT into download mode: Press and hold Boot, press and release RST, release Boot
  • idf.py -p /dev/ttyUSBX flashto flash everything
  • Reset your ESP32-LyraT by pressing RST

License

This project is licensed under the MIT license. See LICENSE for details.

About

Example for ESP32-LyraT: Passthrough Digital Audio over I²S, Baseline for Realtime DSP Applications

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published