You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
See also #13840 and #6059 - if you set the light to RGB 255,0,0 (pure red), home assistant requests this as "x":0.701,"y":0.299. The led driver seems to ignore this. Z2m does report this value as set. If you use Z2M qui to set pure red, the value used is x": 0.7006, "y": 0.2993 (which coincidentally other colored zigbee led bulbs seem to report back as set value when "x":0.701,"y":0.299 is requested)
I have tested with a paulmann 500.47, the mentioned ticket seems to have the same issue with a 500.49.
What did you expect to happen?
I expected color red to be set
How to reproduce it (minimal and precise)
Pair a paulmann led driver such as the 500.49, and set eg {"state":"ON","color":{"x":0.701,"y":0.299},"brightness":254}. The state will not change.
What happened?
See also #13840 and #6059 - if you set the light to RGB 255,0,0 (pure red), home assistant requests this as "x":0.701,"y":0.299. The led driver seems to ignore this. Z2m does report this value as set. If you use Z2M qui to set pure red, the value used is x": 0.7006, "y": 0.2993 (which coincidentally other colored zigbee led bulbs seem to report back as set value when "x":0.701,"y":0.299 is requested)
I have tested with a paulmann 500.47, the mentioned ticket seems to have the same issue with a 500.49.
What did you expect to happen?
I expected color red to be set
How to reproduce it (minimal and precise)
Pair a paulmann led driver such as the 500.49, and set eg {"state":"ON","color":{"x":0.701,"y":0.299},"brightness":254}. The state will not change.
Zigbee2MQTT version
1.37.1 commit: ea39d86
Adapter firmware version
7.4.2 [GA]
Adapter
ember (skyconnect)
Setup
docker container, x86-64 nas
Debug log
blue - light changes
[2024-05-18 18:41:58] debug: z2m: MQTT publish: topic 'zigbee2mqtt/bureau/ledstrip', payload '{"brightness":254,"color":{"h":240,"hue":240,"s":100,"saturation":100,"x":0.136,"y":0.04},"color_mode":"xy","color_temp":370,"color_temp_startup":370,"last_seen":"2024-05-18T16:41:58.183Z","linkquality":255,"power_on_behavior":"previous","state":"ON"}'
red - no change:
[2024-05-18 18:45:46] debug: z2m: MQTT publish: topic 'zigbee2mqtt/bureau/ledstrip', payload '{"brightness":254,"color":{"h":0,"hue":0,"s":100,"saturation":100,"x":0.701,"y":0.299},"color_mode":"xy","color_temp":159,"color_temp_startup":370,"last_seen":"2024-05-18T16:45:46.257Z","linkquality":255,"power_on_behavior":"previous","state":"ON"}'
The text was updated successfully, but these errors were encountered: