-
-
Notifications
You must be signed in to change notification settings - Fork 1.7k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Entity_Not_Found error after assigning friendly names #5618
Comments
The friendly_name is not allowed to end with [
'left', 'right', 'center', 'bottom_left', 'bottom_right', 'default',
'top_left', 'top_right', 'white', 'rgb', 'cct', 'system', 'top', 'bottom', 'center_left', 'center_right',
'ep1', 'ep2', 'row_1', 'row_2', 'row_3', 'row_4', 'relay',
'l1', 'l2', 'l3', 'l4', 'l5', 'l6', 'l7', 'l8',
'button_1', 'button_2', 'button_3', 'button_4', 'button_5',
'button_6', 'button_7', 'button_8', 'button_9', 'button_10',
'button_11', 'button_12', 'button_13', 'button_14', 'button_15',
'button_16', 'button_17', 'button_18', 'button_19', 'button_20',
'button_light', 'button_fan_high', 'button_fan_med', 'button_fan_low',
'heat', 'cool', 'water',
] This was however not properly checked but has been fixed now. I suggest you rename your device to Changes will be available in the latest dev branch in a few hours (https://www.zigbee2mqtt.io/how_tos/how-to-switch-to-dev-branch.html) |
Thank you. That seems to work for the new devices. |
Stop zigbee2mqtt and change name manually in the configuration.yaml |
Sorry if it's a basic question. I am new to Zigbee2Mqtt. |
yes, devices.yaml |
What happened
After assigning a friendly name to Ikea Fyrtur blinds, I get "Entity_Not_Found" error. Frontend shows the correct friendly name, however all the actions throw "entity_not_found" error. Zigbee2Mqtt has been setup as a hassio add-on.
Debug logs after issuing "Open" request: https://pastebin.com/FEMRbaFr
Note: Tried restarting zigbee2mqtt and even hassio several times with no luck.
Tried mosquitto_pub instead of frontend to assign a friendly name but didn't help.
Deleted the device from hassio devices to force update. Didn't work.
Once, we get to this point, the only way to remove the device is by issuing mosquitto_pub delete request.
What did you expect to happen
Devices must work as expected irrespective of the friendly name assignment.
Note that I did not have any issues assigning friendly name to Aqara temperature sensor. However, these sensors are read-only and there's no action to perform over them (if that matters).
How to reproduce it (minimal and precise)
Pair an Ikea Fyrtur blind, rename from the IEEE address to a friendly name. The device stops working.
Debug info
Zigbee2MQTT version:
Adapter hardware: Conbee II
Adapter firmware version:
The text was updated successfully, but these errors were encountered: