Artax core Wallet Daemon (artaxd)

Artax core Wallet Daemon for headless wallets and masternodes.

For a list of all available wallet images see https://lepetitbloc.github.io/wallets/

Issues

• Parameters value issues should be reported at: https://github.com/LePetitBloc/wallets

• All other issues should be reported at: https://github.com/LePetitBloc/wallets-builder

Usage

The container can either be used as a classic headless wallet or a masternode, only the command arguments will differ.

Headless wallet

1. Run a wallet container and specify at least the rpcuser and rpcpassword to interact with the Artax daemon:

docker run --name artax-wallet --restart always -d lepetitbloc/artaxd:1.2 -rpcuser=artax-wallet -rpcpassword=q4qwsaha

We recommend to mount a volume for easier access to the data and the configuration files. You should also create a configuration for your RPC credentials (see ./wallet/.artaxcore/artax.conf) to avoid retyping them when using the internal artax-cli.

docker run --name artax-wallet --restart always -d -v ${PWD}/wallet/:/home/artax/ lepetitbloc/artaxd:1.2

⚠️ Ensure that a data directory exists and is writable in the mounted host directory.

2. Once your wallet is running, you can print your main address:

docker exec artax-wallet artax-cli getaccountaddress ""

GK92mbjS9bCAUuU7DEyyuK9US1qLqkoyce

2. Encrypt your wallet:

You can use pwgen first to generate your passphrase:

pwgen 32 1

quohd4kaw9guvi8ie7phaighawaiLoo6

docker exec artax-wallet artax-cli encryptwallet quohd4kaw9guvi8ie7phaighawaiLoo6

Wallet encrypted; Artax Core server stopping, restart to run with encrypted wallet. The keypool has been flushed, you need to make a new backup.

‼️ Don't forget to backup your passphrase.

Masternode

Prerequisites

1. You must have received 2000 XAX on your wallet in a single transaction, and must have waited for, at least, 1 confirmation.

Note1: If the 2000 XAX came from multiple transactions, you can send them back to yourself.

Note2: Beware of the transaction cost, you should own 2001 XAX as a safety measure.

2. Only then you may find the corresponding transaction hash and index :

docker exec artax-wallet artax-cli masternode outputs

{
 "8e835a7d867d335434925c32f38902268e131e99a5821557d3e77f8ca3829fd8" : "0"
}

3. Then generate a masternode private key:

masternode genkey

7ev3RXQXYfztreEz8wmPKgJUpNiqkAkkdxt24C3ZKtg5qEVfou9

4. And finally creates the ./wallet/.artaxcore//masternode.conf file, and fill in following this template:

mn01 masternode:21529 YouMasterNodePrivateKey TransactionHash 0 YourWalletAddress:100

touch ./wallet/.artaxcore//masternode.conf

Setup

1. As a classic wallet, create a ./masternode/.artaxcore/artax.conf configuration file

rpcuser=artax-mn01
rpcpassword=q4qwsaha
masternode=1
masternodeprivkey=7ev3RXQXYfztreEz8wmPKgJUpNiqkAkkdxt24C3ZKtg5qEVfou9
externalip=YOUR.EXTERNAL.IP:21526
addnode=45.32.233.39:21527
addnode=144.202.74.29:21527
addnode=199.247.0.99:21527
addnode=35.185.28.120:21527
addnode=45.32.22.238:21527
addnode=140.82.60.29:21527
addnode=108.61.252.205:21527
addnode=45.63.82.193:21527
addnode=46.101.48.90:21527
addnode=132.148.139.228:21527
addnode=121.63.252.178:21512
addnode=199.247.6.97:21527
addnode=173.208.188.35:21527
addnode=52.47.168.149:21527
addnode=144.202.36.100:21544
addnode=207.148.0.96:21527
addnode=54.37.72.144:21532
addnode=104.207.143.189:21527
addnode=165.227.87.76:21529
addnode=207.154.194.110:21527

2. Run a container as a masternode:

docker run --name artax-masternode --restart always -d -p 21526:21526 -p 21527:21527 -v ${PWD}/masternode/:/home/artax/ lepetitbloc/artaxd:1.2 -masternode=1

3. Check the the number of blocks until the chain is sync:

docker exec artax-masternode artax-cli getinfo

4. Once the chain synced you can start the masternode from your wallet:

docker exec artax-wallet artax-cli artax-masternode start-all

You might need to unlock your wallet first:

 docker exec artax-wallet artax-cli walletpassphrase quohd4kaw9guvi8ie7phaighawaiLoo6 60

⚠️ Mind the space before the command above, that's not a typo, it’s meant to avoid storing your passphrase in history.

5. Then check the masternode status with your initial transaction hash:

docker exec artax-wallet artax-cli masternodelist | grep 6d94f70499c3f7ba2c59acaa5c04e54ef123d0e460bb07c55ace6464deaf3c85

"6d94f70499c3f7ba2c59acaa5c04e54ef123d0e460bb07c55ace6464deaf3c85-1": "ENABLED",

docker-compose

You could setup both at the same time using docker-compose. Check the provided docker-compose.yml as an example and tweak it to your needs!

docker-compose up --build

Resources

• Website https://www.artaxcoin.org/
• Github https://github.com/artaxcommittee/Artax
• Bitcointalk announcement https://bitcointalk.org/index.php?topic=3267175.0
• Block explorer https://artax.blockxplorer.info/

Parent project

• https://github.com/LePetitBloc/wallets
• https://github.com/LePetitBloc/wallets-builder

Parent image

• Berkeley DB v4.8.30.NC FROM lepetitbloc/bdb:4.8.30.NC

https://github.com/LePetitBloc/bdb/tree/4.8.30.NC https://hub.docker.com/r/lepetitbloc/bdb/

Licence

MIT