BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans #16595

yangwenxiong · 2020-01-18T06:26:54Z

Requirements

Good afternoon!
1、Add new 3D printer motherboard BIGTREE GTR V1.0
2、Maximum support for 6 - way extruder, 6 - way fan, 2 - way K thermocouple, external EEPROM

Description

1、Marlin/src/module/temperature.cpp，
The definition of MAX31865 Pin in this file is not subject to change
2、Marlin/src/gcode/control/M42.cpp
Marlin/src/inc/Conditionals_post.h
Firmware adds fan 3 fan 4 fan 5 support

3、Marlin/src/libs/softspi.h
Modify K - type thermocouple initialization
4、Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h
Marlin/src/pins/pins.h
Add the GTR 3d-printed motherboard pin file
5、platformio.ini
Added environment for GTR 3d-printed motherboard

Benefits

1 、Improve 6 - way fan 6 - way extruder
2 、Supports k-type thermocouple MAX31855 MAX6675
Sensor self-detection can be achieved by Max31855
4 、Default on-board SD card reads Gcode files
3 、If you have any questions, please leave a message. Thank you

Related Issues

yangwenxiong

Restore the pins BTT GTR v1.0.h file annotation based on the error

thinkyhead · 2020-01-20T04:50:01Z

There are some glaring differences between the two printers

@andraisr - Please provide us with correct configurations. Please don't add noise to pull requests which are only for developer use. The correct place to report this is at
https://github.com/MarlinFirmware/Configurations/issues/new

thinkyhead · 2020-01-20T04:52:39Z

@yangwenxiong — You seem to have deleted the pins file. Are you planning to supply a new one?

thinkyhead · 2020-01-20T04:54:11Z

I have fixed up this PR and corrected the target. All PRs should be directed to bugfix-2.0.x.

To get the updated commits in your working copy:

git fetch origin
git checkout 2.0.x
git reset --hard origin/2.0.x

thinkyhead · 2020-01-20T04:54:31Z

Sorry, I had to mess with your repository. Your 2.0.x branch now contains upstream/bugfix-2.0.x plus your changes. After this PR is merged you will need to repair your 2.0.x branch following a command-line procedure that I will describe at that time. To avoid this problem in the future:

Start with the correct branch (bugfix-2.0.x) and make sure to sync it with the latest upstream version before using it as the basis for new changes. This way you are working with up-to-date source code.
Always make a copy of the branch you are modifying and give it a descriptive name. For example you could call this one "adc_adjustable_debounce_PR". This prevents your copies of our upstream branches from becoming corrupted or blocked from use because they are tied to a PR.

This PR may be in review for a while. If you need to use the 2.0.x branch in your fork as the basis for other changes in the meantime, be very careful to use the upstream/2.0.x reference as your starting-point and not the reference to your working copy.

Marlin/src/module/temperature.cpp

Marlin/src/pins/pins.h

buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c

Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h

yangwenxiong · 2020-01-20T08:03:17Z

ok!

…

---Original--- From: "Scott Lahteine"<notifications@github.com> Date: Mon, Jan 20, 2020 16:01 PM To: "MarlinFirmware/Marlin"<Marlin@noreply.github.com>; Cc: "Mention"<mention@noreply.github.com>;"yangwenxiong"<1781804967@qq.com>; Subject: Re: [MarlinFirmware/Marlin] BIGTREE_GTR V1.0 (#16595) @thinkyhead commented on this pull request. In Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h: > + #endif + + // Alter timing for graphical display + #if HAS_GRAPHICAL_LCD + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #define BOARD_ST7920_DELAY_3 DELAY_NS(600) + #endif + + +//#define DOGLCD_CS PB12 +//#define DOGLCD_A0 PA8 +//#define LCD_PINS_DC PB14 +//#define DOGLCD_MOSI PB15 + +#endif // HAS_SPI_LCD Thanks! There is no need to do a second Pull Request. Commits you add to your branch will be added to this one. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

tpruvot · 2020-01-20T14:18:51Z

Marlin/src/libs/softspi.h

-        g_APinDescription[pin].pPort->PIO_SODR = g_APinDescription[pin].ulPin;
-      else
-        g_APinDescription[pin].pPort->PIO_CODR = g_APinDescription[pin].ulPin;
+      digitalWrite(pin, value);


i think that require a cast to pin_t(pin) to use the HAL digitalWrite()

Marlin/src/HAL/HAL_AVR/HAL.h:73:typedef int8_t pin_t; Marlin/src/HAL/HAL_ESP32/HAL.h:82:typedef int16_t pin_t; Marlin/src/HAL/HAL_STM32F1/HAL.h:201:typedef int8_t pin_t; Marlin/src/HAL/HAL_STM32/HAL.h:153:typedef int16_t pin_t;

but maybe i make a confusion with analogWrite... i just see this one

Marlin/src/HAL/HAL_LINUX/include/Arduino.h:104:void digitalWrite(pin_t, uint8_t);

digitalWrite is of course the Arduino "slow" pin write routine, which may be fully optimized on some platforms, but on AVR we bypass it and use our FastIO WRITE routine whenever possible. Since this is a libs entry it should use the fastest pin manipulation technique available in the headers (e.g., <Arduino.h>) it depends on. If the ARM platforms' digitalWrite variants are just doing the same as we were here, then this change is fine.

MangaValk · 2020-01-20T08:55:34Z

platformio.ini

+platform          = ststm32@>=5.7.0
+framework         = arduino
+platform_packages = framework-arduinoststm32@>=3.10700.191028
+board             = BigTree_SKR_Pro


Shouldn't this be gtr?

It depends on whether the framework contains that board definition. It might be too soon…?

sjasonsmith · 2020-01-21T02:28:57Z

buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c

-  //{PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-  //{PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+  {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog?
+  {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog?
+  //{PA_1,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+  //{PA_2,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3


I'm not very fluent in these pins files, but I believe this is allowing PWM on pins tied to timers used for other purposes. If hardware PWM is actually used on these pins, something will likely misbehave.

Of the newly uncommented timers, I see potential conflicts with two of them:

TIM2 - Assigned to TIMER_TONE in variants.h
TIM5 - Assigned to TIMER_SERVO in variants.h

Is this something that needs to be addressed by using different variants.h files, or should changes be made here?

That depends on whether the GTR is a superset of the SKR Pro, or if their pin assignments are completely different. If it’s a superset then a single configuration should be possible for both, but the timer numbers will probably need to change to avoid conflicting with PWM pins.

I’m inclined to think they should be separate, especially once support is added for the expansion port/board.

I agree that it will be easier to manage if it can have its own variant.

Just wanted to point out that this change to PeripheralPins.c appears to double define the Servo and Z min PWM (PA1_PA_2) pin timers for the SKR Pro to TIM2 and TIM5. I don't know the consequences of this as I'm not that savvy but I've been chasing BLTouch issues on the latest bug fix and stumbled upon this in my investigations.

@thinkyhead @sjasonsmith

Just an update, after commenting this out as it timer overlaps I've not had a single bltouch failure since on the SKR Pro.

Again im not a pro at this, but i had tracked down my BLtouch issues to either writing to sd or when the speaker makes tones, and it hasn't happened since I undefined the double defining of PA_1 and PA_2 (should be in TIM5 but were then redefined as TIM2)

Unless im not understanding this right and its all in my head and my BLtouch is just waiting to go rogue again.

Just an update, after commenting this out as it timer overlaps I've not had a single bltouch failure since on the SKR Pro.

@GhostlyCrowd, do you know if there is an open issue you can add that detail to with a link back to this? That is unless you are going to put together a pull request to take care of it.

Just an update, after commenting this out as it timer overlaps I've not had a single bltouch failure since on the SKR Pro.

@GhostlyCrowd, do you know if there is an open issue you can add that detail to with a link back to this? That is unless you are going to put together a pull request to take care of it.

@sjasonsmith No open issue, I'm working on educating my self to put in a PR but maybe it would be more logical to open an issue until I educate my self on how to PR.

Because this may require splitting the BTT GTR and the BTT SKR Pro, thats going obove my level of skill.

yangwenxiong · 2020-01-21T04:59:46Z

In principle, there are 14 stm32f407xx timers, excluding some used for other functions of the timer, other timers, as long as the pin with Timerx_chx can be configured as PWM output, but it seems that I can not, some timers are configured with PWM output but no output. At the same time, I found that PWM port mainly set in the first several timers, IO port does not exceed PA,B,C,D these four groups of IO timer. You can verify that

…

---Original--- From: "Jason Smith"<notifications@github.com> Date: Tue, Jan 21, 2020 10:29 AM To: "MarlinFirmware/Marlin"<Marlin@noreply.github.com>; Cc: "Mention"<mention@noreply.github.com>;"yangwenxiong"<1781804967@qq.com>; Subject: Re: [MarlinFirmware/Marlin] BIGTREE_GTR V1.0 (#16595) @sjasonsmith commented on this pull request. In buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c: > - //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog? + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog? + //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 + //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 I'm not very fluent in these pins files, but I believe this is allowing PWM on pins tied to timers used for other purposes. If hardware PWM is actually used on these pins, something will likely misbehave. Of the newly uncommented timers, I see potential conflicts with two of them: TIM2 - Assigned to TIMER_TONE in variants.h TIM5 - Assigned to TIMER_SERVO in variants.h — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

thinkyhead · 2020-01-21T06:43:10Z

Rebased to resolve some conflicts. I've also added changes to accommodate up to 8 heaters, temp sensors, and fans, and thus up to 8 extruders.

To get the updated commits in your working copy:

git fetch origin
git checkout 2.0.x
git reset --hard origin/2.0.x

…ns (MarlinFirmware#16595)

* Don't test certain changes * Reset runout.ran_out on resume (MarlinFirmware#16230) * Step timing cleanup and rounding fix (MarlinFirmware#16258) * Add MRR_ESPA/_ESPE (ESP32) boards (MarlinFirmware#16238) * Add Ender-5 Pro config (MarlinFirmware#16221) * Add FLYBOARD (STM32F407ZG) (MarlinFirmware#16257) * Fix STM32 flush of TX (used by UBL) (MarlinFirmware#16197) * Flash leveling (for some STM32) (MarlinFirmware#16174) * Some ESP32 patches (MarlinFirmware#16297) * MKS SGen-L pins EEBF or EFBF scheme (MarlinFirmware#16296) * Add Rumba32 support for PIO (MarlinFirmware#16202) * MKS Robin 2 (STM32F407ZE) base support (MarlinFirmware#16270) * Update Czech language (MarlinFirmware#16305) * Sync SKR E3 configs (MarlinFirmware#16301) * Add NOZZLE_AS_PROBE (no probe offsets) (MarlinFirmware#15929) * Update README with status badge, etc. * Split up HAL items * Update mfpub for current MarlinDocumentation * Fix Max7219 with 256 or more cels * Fix games menu back item, titles * Update comments re: NOZZLE_AS_PROBE * Fix min limit for acc, feed, jerk (MarlinFirmware#16416) * Improve Renkforce configs (MarlinFirmware#16417) * Permit ENDSTOP_INTERRUPTS_FEATURE on more STM32 (MarlinFirmware#16412) * Improve STEVAL_3DP001V1 and future STEVAL_* support (MarlinFirmware#16404) * MKS Robin ILI9328 TFT support (MarlinFirmware#16401) * Disable PIDTEMPBED for SKR Mini E3 (MarlinFirmware#16396) * Return from loop() on non-AVR boards (MarlinFirmware#16390) * Refactor TMC-related macros and sanity checks (MarlinFirmware#16384) * Add FILAMENT_UNLOAD_PURGE_FEEDRATE (MarlinFirmware#16372) * Fix some DOGM warnings (MarlinFirmware#16363) * Fix warnings in stepper.cpp (MarlinFirmware#16364) * Fix PrintrBoard build (ignore TMC libraries) (MarlinFirmware#16346) (In future try to get Teensy processors better supported by `TMCStepper`.) * Clean up trailing whitespace * PWM pin not needed for Neopixel brightness / submenu (MarlinFirmware#16345) * Misc patches preceding DGUS PR * Fix Visual Micro "Arduino IDE for Visual Studio" support (MarlinFirmware#16418) * Update Russian language (MarlinFirmware#16426) * STM32F1: Fix misleading indent / nullptr on FSMC (MarlinFirmware#16431) * Z-offset edit precision based on value limits (MarlinFirmware#16425) * Add Ender-5 leadscrew README (MarlinFirmware#16424) * Add motherboard BIGTREE_SKR_V1.4_TURBO (MarlinFirmware#16374) * Enable MULTI_NOZZLE_DUPLICATION for BIBO (MarlinFirmware#16435) * Touch UI: Fix UBL mesh value editing (MarlinFirmware#16432) * Sidewinder X1 Config Updates (MarlinFirmware#16315) * Add Leapfrog Xeed 2015 support (MarlinFirmware#16400) * Improve JGAurora A1/A5S touch buttons (MarlinFirmware#16394) * Standardize drivers.h values, add class indirection (MarlinFirmware#16448) * Update Russian language (MarlinFirmware#16440) * BTT002: Add runout, PLR, and RGB pins (MarlinFirmware#16442) * Pins debugging AVR serial pins (MarlinFirmware#16437) * Fix MIN_PROBE_EDGE bug in default ABL G29 (MarlinFirmware#16367) * Temporary CI fix for STM32 * Use a default monitor_speed of 250000 * MSG_WATCH => MSG_INFO_SCREEN * Add EVNOVO (Artillery) Genius config (MarlinFirmware#16320) * Fixed Creality CR-20 Pro configuration example (MarlinFirmware#16332) * FYSETC F6 v1.4 board support (MarlinFirmware#16321) * Add example configs. Expand custom menu. (MarlinFirmware#16286) - Anet E10 - Geeetech D200 - Geeetech M201 - JGAurora Magic - MakerFarm Pegasus 12 * Fix Ender-2 display pins, add BTN_ENC (MarlinFirmware#16349) * Update and fix DGUS (MarlinFirmware#16317) * Fix serials available on SKR Pro 1.1 (MarlinFirmware#16439) * Fix daily date bump action * Action to check PRs * Update maintainer funding links * Skip build tests on forks * Update git helper usage * Fix EEPROM error with EXTRUDERS == 0 (MarlinFirmware#16464) * Fix M115 cap with EXTRUDERS == 0 (MarlinFirmware#16459) * Add option to invert joystick axes (MarlinFirmware#16466) * Update Russian language (MarlinFirmware#16461) * Fix permyriad progress bar (MarlinFirmware#16460) * Improve French language (UBL) (MarlinFirmware#16453) * Followup to EEPROM patch (MarlinFirmware#16470) * Remove extra UBL map edit menu item (MarlinFirmware#16451) * Fix unused var warning (MarlinFirmware#16467) * Update U20 config to help UBL toggle (MarlinFirmware#16471) * Move auto_build.py to 'vscode' folder * Fix MKS_SGEN sanity check (MarlinFirmware#16501) * Fix EEPROM array size bug (MarlinFirmware#16475) * Fix SKR Pro BLTouch conflicting timers (MarlinFirmware#16499) * Provide some missing Arduino macros (MarlinFirmware#16497) * Fix Change Filament menu item with runout (MarlinFirmware#16485) * Fix LCD for Tevo Tornado (MarlinFirmware#16474) * Update workflow skip condition * Add menu item Tune > Advance K (MarlinFirmware#16488) * Extend SERIAL_CHAR to take multiple arguments * Code style and comment tweaks * Correct ESP32 CPU speed in README (MarlinFirmware#16472) * Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (MarlinFirmware#16510) * Fix compile error w/out LCD (MarlinFirmware#16502) * Add Probe Offsets menu (MarlinFirmware#16444) * Fix Probe Offset XY edit items (et Français) (MarlinFirmware#16523) * Update Russian language (MarlinFirmware#16522) * [cron] Bump distribution date (2020-01-10) * Prevent Z misaligment on tool change (MarlinFirmware#16518) * Update Italian language (MarlinFirmware#16527) * ESP3d integration for ESP32 (MarlinFirmware#16515) * [cron] Bump distribution date (2020-01-11) * Migrate actions to default (2.0.x) branch * Only constrain motion on homed axes (MarlinFirmware#16533) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * Fix probeless delta build (MarlinFirmware#16537) * Use RECIPROCAL macro (not _RECIP) (MarlinFirmware#16530) * [cron] Bump distribution date (2020-01-12) * Restore test_builds action to bugfix * Update auto_build.py paths for Atom/Sublime * [cron] Bump distribution date (2020-01-13) * Add GTM32 (STM32F103VET6) environment (MarlinFirmware#16454) * Power options formatting * Geeetech G2Pro configuration (MarlinFirmware#16553) * Fix Linux upload path detection (MarlinFirmware#16514) * Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support (MarlinFirmware#16538) * Clean up whitespace * [cron] Bump distribution date (2020-01-14) * Improved STMicro L64XX stepper driver support (MarlinFirmware#16452) * Make lcd_power_loss_recovery_cancel exportable * Fix PLR cancel with ExtUI (MarlinFirmware#16556) * Bring MP_SCARA config up to date * Fix Fysetc S6 FLASH_PAGE_SIZE and test build (MarlinFirmware#16560) * [cron] Bump distribution date (2020-01-15) * Update more configs * Move configurations to a separate repo * Fix build error with unsupported reset flags (MarlinFirmware#16562) * Steval_3DP001V1 timers, analog inputs, etc. (MarlinFirmware#16565) * Use Flash EEPROM on BTT002 (MarlinFirmware#16558) * Get test configs from GitHub * Fix typo * Nikon IR support for time lapse photos (MarlinFirmware#16539) * Adjustable ADC debounce delay (MarlinFirmware#16264) * [cron] Bump distribution date (2020-01-16) * STM32 RODATA LENGTH (MarlinFirmware#16580) * Fix I2C address of MCP4728 on LPC176x (MarlinFirmware#16578) * Fix GTM32 environment (to prevent a crash) * Fix some warnings, Melzi pins * Move macros to stepper/indirection * Fix TOUCH_UI_FTDI_EVE bugs (MarlinFirmware#16540) * ESP32 HAL: Fix random pauses during prints (MarlinFirmware#16548) * [cron] Bump distribution date (2020-01-17) * STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. (MarlinFirmware#16579) * Clean up HAL ADC, old test scripts * Adjust GTM32 build flags (MarlinFirmware#16582) * Shared SPI sanity check (MarlinFirmware#16581) * More CI test updates * Update FYSETC S6 pins (MarlinFirmware#16559) * PINDA v2 temperature sensor / compensation (MarlinFirmware#16293) * [cron] Bump distribution date (2020-01-18) * Allow RRW Keypad with any LCD * [cron] Bump distribution date (2020-01-19) * [cron] Bump distribution date (2020-01-20) * Fix M112 with Emergency Parser * Simplify TMC monitor code * Updates for L64XX * Function-like macros * Use bool in pin compare * Patch for _STEP_INIT * Simplify a drivers.h macro (MarlinFirmware#16589) * SAMD51: ADC for probe temperature compensation (MarlinFirmware#16596) * Update FYSETC S6 Peripheral Pins (MarlinFirmware#16593) * Update BTT002 pins (MarlinFirmware#16591) * Reset shutdown timer on M85 (MarlinFirmware#16587) * AVR sanity check for MONITOR_DRIVER_STATUS with SW Serial (MarlinFirmware#16421) * STEVAL_3DP001V1: Easier Serial2 (for WIFI interface) (MarlinFirmware#16599) * Fix Greek language string (MarlinFirmware#16601) * Quad Z stepper support (MarlinFirmware#16277) * LPC1768: Allow I2C master channel override (MarlinFirmware#16584) * Move steps/mm out of slim menus (MarlinFirmware#16603) * Fix CHAMBER_MAXTEMP security margin (MarlinFirmware#16600) * L64xx M906 Fix status variable, formatting (MarlinFirmware#16597) * Provide methods for M420 + MBL (MarlinFirmware#16602) * [cron] Bump distribution date (2020-01-21) * Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning (MarlinFirmware#16621) * Override for LPC1768 u8g/digipot I2C master ID (MarlinFirmware#16622) * Release UI on G26 priming timeout (MarlinFirmware#16449) * Add HMS434 V15 ATSAM board (MarlinFirmware#16620) * Tweak some config spacing * G12 defaults per tool. Event G-code for post-toolchange (MarlinFirmware#16554) * Arc segment radius scaling (MarlinFirmware#16551) * Update mfdoc, mfpub * [cron] Bump distribution date (2020-01-22) * Tweak mfpub stashing * [cron] Bump distribution date (2020-01-23) * Enable use of latest TMCStepper on MKS Robin Nano (MarlinFirmware#16652) * [cron] Bump distribution date (2020-01-24) * Convert chars only for enabled languages * Extra debugging for leveling on/off * Bring configs and drivers.h up to date * Duet Smart Effector support (MarlinFirmware#16641) * BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (MarlinFirmware#16595) * [cron] Bump distribution date (2020-01-26) * Fix DELTA_CALIBRATION_MENU recursive call (MarlinFirmware#16656) * Fix MKS Base + Digipot compile error (MarlinFirmware#16636) * Add ESP3DLib idletask entry point (MarlinFirmware#16658) * Fix Serial defines for M43 on AVR (MarlinFirmware#16649) * Fix HOMING_BACKOFF_MM for DELTA (MarlinFirmware#16657) * Clean up PID language defines * More 8 extruder defines * Update Slovak language (MarlinFirmware#16646) * Fix M43 timer report on AVR (MarlinFirmware#16645) * Fix Spanish (swapped BLTouch strings) (MarlinFirmware#16637) * SKR 1.3 sensorless endstops hack (MarlinFirmware#16659) * Fix PID F menu label * [cron] Bump distribution date (2020-01-27) * Preserve CWD for write/remove file (MarlinFirmware#16667) * Rename some temperature members * Fix Trigorilla 1.4 limit switches See MarlinFirmware#16612 * Fix serial port redirection (index ≠ port num) (MarlinFirmware#16687) * G60/G61 Position Save/Restore (MarlinFirmware#16557) * Remove extraneous G60/G61 lines * Fix Manual Bed Leveling with multiple extruders (MarlinFirmware#16688) * [cron] Bump distribution date (2020-01-28) * Prevent SD access from resetting ESP32 (MarlinFirmware#16690) * [cron] Bump distribution date (2020-01-29) * Fix Toolchange (!no_move) return to status (MarlinFirmware#16699) * [cron] Bump distribution date (2020-01-30) * Cleanup of old includes, add comments * Fix HAS_FAN macro (MarlinFirmware#16717) * Fix probe temp calibration (MarlinFirmware#16718) * Support for E4d@BOX mainboard (MarlinFirmware#16716) * Fix missing string for M48 build (MarlinFirmware#16708) * Fix G60/G61 slots > 8 and compile error (MarlinFirmware#16715) * Move L64XX index_to_axis to progmem (MarlinFirmware#16697) * Refactor heater watch, job timer auto-start (MarlinFirmware#16725) * Auto assign DIAG pins for multi-endstop (MarlinFirmware#16723) * Tweak G60/G61 slots * Fix compile error in SdVolume on ESP32 (MarlinFirmware#16728) * Simultaneous use of rotary encoder and touch buttons (MarlinFirmware#16729) * Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo (MarlinFirmware#16727) * Extend RX/TX pins for up to 8 extruders * Fix up, improve endstop pin auto-assignment Followup for MarlinFirmware#16723 * (21) PT100 for MCUs with 3.3v logic (MarlinFirmware#16731) * [cron] Bump distribution date (2020-01-31) * Add sanity-check for new Advanced Pause option Followup to MarlinFirmware#16372 * Include macros for delta ABC * Update Russian language (MarlinFirmware#16745) * Fix BTT SKR 1.4 extra endstop pins (MarlinFirmware#16738) * Option for Trigorilla 1.4 with add-on endstops board (MarlinFirmware#16737) * Consistent M112 with Emergency Parser (MarlinFirmware#16747) * Improve mfadd helper script - Use the original branch name if none is supplied - Set the remote tracking to the source - Accept User/Branch or User:Branch syntax * Clean up i2c encoder, sanitize serial * Misc cleanup, whitespace * Encapsulate probe as singleton class (MarlinFirmware#16751) * G34 automatic point assignment (MarlinFirmware#16473) * Fix Temperature::over_autostart_threshold (MarlinFirmware#16749) * Update Russian language (MarlinFirmware#16750) * Fix CURRENT_STEP_DOWN compile error * Drop obsolete SD special char handling See MarlinFirmware#14035 * Probe singleton patch Followup to MarlinFirmware#16751 * Fix RGB / Neopixel white color bug See MarlinFirmware#16752 * Suppress a compile warning * More 8-extruder fixups Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Tanguy Pruvot <tpruvot@users.noreply.github.com> Co-authored-by: Jason Smith <jason.inet@gmail.com> Co-authored-by: Luc <8822552+luc-github@users.noreply.github.com> Co-authored-by: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Co-authored-by: FLYmaker <49380822+FLYmaker@users.noreply.github.com> Co-authored-by: randellhodges <rhodges@taxfodder.com> Co-authored-by: ferengi82 <christian.maurer@gmx.eu> Co-authored-by: Luu Lac <45380455+shitcreek@users.noreply.github.com> Co-authored-by: petrzjunior <junior@zahradnik.cz> Co-authored-by: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Co-authored-by: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Co-authored-by: Dirk O. Kaar <19971886+dok-net@users.noreply.github.com> Co-authored-by: Pascal de Bruijn <pmjdebruijn@pcode.nl> Co-authored-by: Bob Kuhn <bob.kuhn@att.net> Co-authored-by: Alexander Gavrilenko <jmz52@users.noreply.github.com> Co-authored-by: swilkens <stefanwilkens@gmail.com> Co-authored-by: Lino Barreca <linobarreca@hotmail.com> Co-authored-by: rado79 <51396577+rado79@users.noreply.github.com> Co-authored-by: Acenotass <44540957+Acenotass@users.noreply.github.com> Co-authored-by: ellensp <ellensp@hotmail.com> Co-authored-by: Walt Sorensen <photodude@users.noreply.github.com> Co-authored-by: yedey <myco@gmx.net> Co-authored-by: George Fu <nailao_5918@163.com> Co-authored-by: Vertabreaker <opyrus@hotmail.com> Co-authored-by: greppp <gregory.perrin87@gmail.com> Co-authored-by: Jamie <vector76@users.noreply.github.com> Co-authored-by: Justin <justinwilczek@gmail.com> Co-authored-by: ManuelMcLure <manuel@mclure.org> Co-authored-by: 0r31 <37673727+0r31@users.noreply.github.com> Co-authored-by: Alejandro Aguilera <fenixin@gmail.com> Co-authored-by: meponderR <33591888+meponderR@users.noreply.github.com> Co-authored-by: Mehdi Beyk Mohamadi <mbm_greenway@yahoo.com> Co-authored-by: FlyingSamson <59110786+FlyingSamson@users.noreply.github.com> Co-authored-by: Ryan V1 <55478432+V1EngineeringInc@users.noreply.github.com> Co-authored-by: David Klasinc <bigwhale@lubica.net> Co-authored-by: gjdodd <31553294+gjdodd@users.noreply.github.com> Co-authored-by: Dennis <16547088+soligen2010@users.noreply.github.com> Co-authored-by: felixstorm <felix.storm@glueckkanja.com> Co-authored-by: vivian-ng <vivian@maplerain.com> Co-authored-by: tompe-proj <59094873+tompe-proj@users.noreply.github.com> Co-authored-by: MaukCC <jos@mauk.cc> Co-authored-by: Ryan <allted@gmail.com> Co-authored-by: Artur Petrzak <petrzmax@gmail.com> Co-authored-by: yangwenxiong <46896566+yangwenxiong@users.noreply.github.com> Co-authored-by: Roman Moravčík <roman.moravcik@gmail.com> Co-authored-by: Robby Candra <robbycandra.mail@gmail.com> Co-authored-by: Hans007a <32525735+Hans007a@users.noreply.github.com> Co-authored-by: Neskik <axel.gouverneur@gmail.com> Co-authored-by: Mauro <exilaus@hotmail.com> Co-authored-by: Radek Pietruszewski <radexpl@gmail.com> Co-authored-by: chgi <chgi@users.noreply.github.com> Co-authored-by: Robert Stein <stonecoldcrazy@stoneathome.de> Co-authored-by: rebel1 <453277+rebel1@users.noreply.github.com>

yangwenxiong commented Jan 18, 2020

View reviewed changes

thinkyhead changed the base branch from 2.0.x to bugfix-2.0.x January 20, 2020 04:44

thinkyhead added the C: Boards/Pins label Jan 20, 2020

thinkyhead force-pushed the 2.0.x branch from 172991c to aca5a0a Compare January 20, 2020 04:54

thinkyhead requested changes Jan 20, 2020

View reviewed changes

yangwenxiong commented Jan 20, 2020

View reviewed changes

Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h Show resolved Hide resolved

thinkyhead approved these changes Jan 20, 2020

View reviewed changes

tpruvot reviewed Jan 20, 2020

View reviewed changes

MangaValk reviewed Jan 20, 2020

View reviewed changes

thinkyhead mentioned this pull request Jan 21, 2020

Split out & fix STM401, STM4xx & STM32F7xx timers - also fix STEVAL_3DP001V1 compil warning #16621

Merged

sjasonsmith reviewed Jan 21, 2020

View reviewed changes

thinkyhead force-pushed the 2.0.x branch 2 times, most recently from 532b77f to 5158495 Compare January 21, 2020 04:43

yangwenxiong and others added 9 commits January 20, 2020 22:44

Support for BTT GTR V1.0

0e5ab5a

Update PeripheralPins.c

a571be7

Add files via upload

dcecc37

Update PeripheralPins.c

507dbab

Update pins_BTT_GTR_V1_0.h

1ef602d

Update PeripheralPins.c

a199aab

Update softspi.h

afae550

Update platformio.ini

01c755f

Clean up pins

c5345a4

thinkyhead force-pushed the 2.0.x branch from 5158495 to f6130b0 Compare January 21, 2020 04:47

Add support for up to 8 extruders

40b34ef

thinkyhead force-pushed the 2.0.x branch from f6130b0 to 40b34ef Compare January 21, 2020 04:47

Support for up to 8 fans

bafa969

thinkyhead force-pushed the 2.0.x branch from f17aa02 to bafa969 Compare January 21, 2020 06:28

thinkyhead added 2 commits January 21, 2020 00:37

Update L64XX_Marlin.cpp

5d38caa

Fix temperature SPI pins

c518e00

Capture by reference

6e1aebd

InsanityAutomation mentioned this pull request Jan 22, 2020

tmc: add missing E6/E7 defines #16648

Merged

thinkyhead merged commit 248b7df into MarlinFirmware:bugfix-2.0.x Jan 25, 2020

thinkyhead changed the title ~~BIGTREE_GTR V1.0~~ BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans Jan 25, 2020

kurtnelle pushed a commit to kurtnelle/PolyNC-SKR-PRO-Marlin-Firmware that referenced this pull request Jan 29, 2020

BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fa…

7a671fc

…ns (MarlinFirmware#16595)

GhostlyCrowd mentioned this pull request May 8, 2020

[BUG] Pins for SKR Pro defined twice, causing timer overlap #17918

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans #16595

BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans #16595

yangwenxiong commented Jan 18, 2020

yangwenxiong left a comment

thinkyhead commented Jan 20, 2020 •

edited

Loading

thinkyhead commented Jan 20, 2020

thinkyhead commented Jan 20, 2020

thinkyhead commented Jan 20, 2020

yangwenxiong commented Jan 20, 2020 via email

tpruvot Jan 20, 2020

tpruvot Jan 20, 2020 •

edited by thinkyhead

Loading

tpruvot Jan 20, 2020 •

edited by thinkyhead

Loading

thinkyhead Jan 21, 2020 •

edited

Loading

MangaValk Jan 20, 2020

thinkyhead Jan 21, 2020

sjasonsmith Jan 21, 2020

thinkyhead Jan 21, 2020

sjasonsmith Jan 21, 2020 •

edited

Loading

thinkyhead Jan 21, 2020

GhostlyCrowd Apr 28, 2020 •

edited

Loading

GhostlyCrowd May 7, 2020 •

edited

Loading

sjasonsmith May 7, 2020

GhostlyCrowd May 7, 2020 •

edited

Loading

yangwenxiong commented Jan 21, 2020 via email

thinkyhead commented Jan 21, 2020

BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans #16595

BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans #16595

Conversation

yangwenxiong commented Jan 18, 2020

Requirements

Description

Benefits

Related Issues

yangwenxiong left a comment

Choose a reason for hiding this comment

thinkyhead commented Jan 20, 2020 • edited Loading

thinkyhead commented Jan 20, 2020

thinkyhead commented Jan 20, 2020

thinkyhead commented Jan 20, 2020

yangwenxiong commented Jan 20, 2020 via email

tpruvot Jan 20, 2020

Choose a reason for hiding this comment

tpruvot Jan 20, 2020 • edited by thinkyhead Loading

Choose a reason for hiding this comment

tpruvot Jan 20, 2020 • edited by thinkyhead Loading

Choose a reason for hiding this comment

thinkyhead Jan 21, 2020 • edited Loading

Choose a reason for hiding this comment

MangaValk Jan 20, 2020

Choose a reason for hiding this comment

thinkyhead Jan 21, 2020

Choose a reason for hiding this comment

sjasonsmith Jan 21, 2020

Choose a reason for hiding this comment

thinkyhead Jan 21, 2020

Choose a reason for hiding this comment

sjasonsmith Jan 21, 2020 • edited Loading

Choose a reason for hiding this comment

thinkyhead Jan 21, 2020

Choose a reason for hiding this comment

GhostlyCrowd Apr 28, 2020 • edited Loading

Choose a reason for hiding this comment

GhostlyCrowd May 7, 2020 • edited Loading

Choose a reason for hiding this comment

sjasonsmith May 7, 2020

Choose a reason for hiding this comment

GhostlyCrowd May 7, 2020 • edited Loading

Choose a reason for hiding this comment

yangwenxiong commented Jan 21, 2020 via email

thinkyhead commented Jan 21, 2020

thinkyhead commented Jan 20, 2020 •

edited

Loading

tpruvot Jan 20, 2020 •

edited by thinkyhead

Loading

tpruvot Jan 20, 2020 •

edited by thinkyhead

Loading

thinkyhead Jan 21, 2020 •

edited

Loading

sjasonsmith Jan 21, 2020 •

edited

Loading

GhostlyCrowd Apr 28, 2020 •

edited

Loading

GhostlyCrowd May 7, 2020 •

edited

Loading

GhostlyCrowd May 7, 2020 •

edited

Loading