More custom user menu items

Marlin/Configuration_adv.h

@@ -3415,6 +3415,71 @@
   #define GCODE_MACROS_SLOT_SIZE  50  // Maximum length of a single macro
 #endif
 
+/**
+ * User-defined menu items to run custom G-code.
+ * Up to 25 may be defined, but the actual number is LCD-dependent.
+ */
+
+// Custom Menu: Main Menu
+//#define CUSTOM_MENU_MAIN
+#if ENABLED(CUSTOM_MENU_MAIN)
+  //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands"
+  #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done"
+  #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK
+  //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN   // Return to status screen after a script
+  #define CUSTOM_MENU_MAIN_ONLY_IDLE         // Only show custom menu when the machine is idle
+
+  #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info"
+  #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W"
+  //#define MAIN_MENU_ITEM_1_CONFIRM          // Show a confirmation dialog before this action
+
+  #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL
+  #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
+  //#define MAIN_MENU_ITEM_2_CONFIRM
+
+  //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
+  //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
+  //#define MAIN_MENU_ITEM_3_CONFIRM
+
+  //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
+  //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
+  //#define MAIN_MENU_ITEM_4_CONFIRM
+
+  //#define MAIN_MENU_ITEM_5_DESC "Home & Info"
+  //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
+  //#define MAIN_MENU_ITEM_5_CONFIRM
+#endif
+
+// Custom Menu: Configuration Menu
+//#define CUSTOM_MENU_CONFIG
+#if ENABLED(CUSTOM_MENU_CONFIG)
+  //#define CUSTOM_MENU_CONFIG_TITLE "Custom Commands"
+  #define CUSTOM_MENU_CONFIG_SCRIPT_DONE "M117 Wireless Script Done"
+  #define CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK
+  //#define CUSTOM_MENU_CONFIG_SCRIPT_RETURN  // Return to status screen after a script
+  #define CUSTOM_MENU_CONFIG_ONLY_IDLE        // Only show custom menu when the machine is idle
+
+  #define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
+  #define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
+  //#define CONFIG_MENU_ITEM_1_CONFIRM        // Show a confirmation dialog before this action
+
+  #define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
+  #define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
+  //#define CONFIG_MENU_ITEM_2_CONFIRM
+
+  //#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
+  //#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
+  //#define CONFIG_MENU_ITEM_3_CONFIRM
+
+  //#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
+  //#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
+  //#define CONFIG_MENU_ITEM_4_CONFIRM
+
+  //#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
+  //#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
+  //#define CONFIG_MENU_ITEM_5_CONFIRM
+#endif
+
 /**
  * User-defined buttons to run custom G-code.
  * Up to 25 may be defined.
@@ -3446,39 +3511,6 @@
   #endif
 #endif
 
-/**
- * User-defined menu items to run custom G-code.
- * Up to 25 may be defined, but the actual number is LCD-dependent.
- */
-//#define CUSTOM_USER_MENUS
-#if ENABLED(CUSTOM_USER_MENUS)
-  //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
-  #define USER_SCRIPT_DONE "M117 User Script Done"
-  #define USER_SCRIPT_AUDIBLE_FEEDBACK
-  //#define USER_SCRIPT_RETURN    // Return to status screen after a script
-  #define CUSTOM_MENU_ONLY_IDLE   // Only show custom menu when the machine is idle
-
-  #define USER_DESC_1 "Home & UBL Info"
-  #define USER_GCODE_1 "G28\nG29W"
-  //#define USER_CONFIRM_1        // Show a confirmation dialog before this action
-
-  #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
-  #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
-  //#define USER_CONFIRM_2
-
-  #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
-  #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
-  //#define USER_CONFIRM_3
-
-  #define USER_DESC_4 "Heat Bed/Home/Level"
-  #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
-  //#define USER_CONFIRM_4
-
-  #define USER_DESC_5 "Home & Info"
-  #define USER_GCODE_5 "G28\nM503"
-  //#define USER_CONFIRM_5
-#endif
-
 /**
  * Host Action Commands
  *

Marlin/src/inc/Conditionals_adv.h

@@ -536,7 +536,7 @@
                          (defined(MMU2_SERIAL_PORT) && MMU2_SERIAL_PORT == (N)) || \
                          (defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == (N))
 
-#if ENABLED(CUSTOM_USER_MENUS)
+#if BOTH(HAS_TFT_LVGL_UI, CUSTOM_MENU_MAIN)
   #define _HAS_1(N) (defined(USER_DESC_##N) && defined(USER_GCODE_##N))
   #define HAS_USER_ITEM(V...) DO(HAS,||,V)
 #else

Marlin/src/inc/SanityCheck.h

@@ -553,6 +553,8 @@
   #error "Z_AFTER_DEACTIVATE is replaced by Z_IDLE_HEIGHT."
 #elif defined(MEATPACK)
   #error "MEATPACK is now enabled with MEATPACK_ON_SERIAL_PORT_1, MEATPACK_ON_SERIAL_PORT_2, etc."
+#elif defined(CUSTOM_USER_MENUS)
+  #error "CUSTOM_USER_MENUS has been replaced by CUSTOM_MENU_MAIN and CUSTOM_MENU_CONFIG."
 #endif
 
 /**
@@ -2986,109 +2988,6 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
   #error "GCODE_MACROS_SLOTS must be a number from 1 to 10."
 #endif
 
-#if ENABLED(CUSTOM_USER_MENUS)
-  #ifdef USER_GCODE_1
-    constexpr char _chr1 = USER_GCODE_1[strlen(USER_GCODE_1) - 1];
-    static_assert(_chr1 != '\n' && _chr1 != '\r', "USER_GCODE_1 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_2
-    constexpr char _chr2 = USER_GCODE_2[strlen(USER_GCODE_2) - 1];
-    static_assert(_chr2 != '\n' && _chr2 != '\r', "USER_GCODE_2 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_3
-    constexpr char _chr3 = USER_GCODE_3[strlen(USER_GCODE_3) - 1];
-    static_assert(_chr3 != '\n' && _chr3 != '\r', "USER_GCODE_3 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_4
-    constexpr char _chr4 = USER_GCODE_4[strlen(USER_GCODE_4) - 1];
-    static_assert(_chr4 != '\n' && _chr4 != '\r', "USER_GCODE_4 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_5
-    constexpr char _chr5 = USER_GCODE_5[strlen(USER_GCODE_5) - 1];
-    static_assert(_chr5 != '\n' && _chr5 != '\r', "USER_GCODE_5 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_6
-    constexpr char _chr6 = USER_GCODE_6[strlen(USER_GCODE_6) - 1];
-    static_assert(_chr6 != '\n' && _chr6 != '\r', "USER_GCODE_6 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_7
-    constexpr char _chr7 = USER_GCODE_7[strlen(USER_GCODE_7) - 1];
-    static_assert(_chr7 != '\n' && _chr7 != '\r', "USER_GCODE_7 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_8
-    constexpr char _chr8 = USER_GCODE_8[strlen(USER_GCODE_8) - 1];
-    static_assert(_chr8 != '\n' && _chr8 != '\r', "USER_GCODE_8 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_9
-    constexpr char _chr9 = USER_GCODE_9[strlen(USER_GCODE_9) - 1];
-    static_assert(_chr9 != '\n' && _chr9 != '\r', "USER_GCODE_9 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_10
-    constexpr char _chr10 = USER_GCODE_10[strlen(USER_GCODE_10) - 1];
-    static_assert(_chr10 != '\n' && _chr10 != '\r', "USER_GCODE_10 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_11
-    constexpr char _chr11 = USER_GCODE_11[strlen(USER_GCODE_11) - 1];
-    static_assert(_chr11 != '\n' && _chr11 != '\r', "USER_GCODE_11 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_12
-    constexpr char _chr12 = USER_GCODE_12[strlen(USER_GCODE_12) - 1];
-    static_assert(_chr12 != '\n' && _chr12 != '\r', "USER_GCODE_12 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_13
-    constexpr char _chr13 = USER_GCODE_13[strlen(USER_GCODE_13) - 1];
-    static_assert(_chr13 != '\n' && _chr13 != '\r', "USER_GCODE_13 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_14
-    constexpr char _chr14 = USER_GCODE_14[strlen(USER_GCODE_14) - 1];
-    static_assert(_chr14 != '\n' && _chr14 != '\r', "USER_GCODE_14 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_15
-    constexpr char _chr15 = USER_GCODE_15[strlen(USER_GCODE_15) - 1];
-    static_assert(_chr15 != '\n' && _chr15 != '\r', "USER_GCODE_15 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_16
-    constexpr char _chr16 = USER_GCODE_16[strlen(USER_GCODE_16) - 1];
-    static_assert(_chr16 != '\n' && _chr16 != '\r', "USER_GCODE_16 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_17
-    constexpr char _chr17 = USER_GCODE_17[strlen(USER_GCODE_17) - 1];
-    static_assert(_chr17 != '\n' && _chr17 != '\r', "USER_GCODE_17 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_18
-    constexpr char _chr18 = USER_GCODE_18[strlen(USER_GCODE_18) - 1];
-    static_assert(_chr18 != '\n' && _chr18 != '\r', "USER_GCODE_18 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_19
-    constexpr char _chr19 = USER_GCODE_19[strlen(USER_GCODE_19) - 1];
-    static_assert(_chr19 != '\n' && _chr19 != '\r', "USER_GCODE_19 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_20
-    constexpr char _chr20 = USER_GCODE_20[strlen(USER_GCODE_20) - 1];
-    static_assert(_chr20 != '\n' && _chr20 != '\r', "USER_GCODE_20 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_21
-    constexpr char _chr21 = USER_GCODE_21[strlen(USER_GCODE_21) - 1];
-    static_assert(_chr21 != '\n' && _chr21 != '\r', "USER_GCODE_21 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_22
-    constexpr char _chr22 = USER_GCODE_22[strlen(USER_GCODE_22) - 1];
-    static_assert(_chr22 != '\n' && _chr22 != '\r', "USER_GCODE_22 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_23
-    constexpr char _chr23 = USER_GCODE_23[strlen(USER_GCODE_23) - 1];
-    static_assert(_chr23 != '\n' && _chr23 != '\r', "USER_GCODE_23 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_24
-    constexpr char _chr24 = USER_GCODE_24[strlen(USER_GCODE_24) - 1];
-    static_assert(_chr24 != '\n' && _chr24 != '\r', "USER_GCODE_24 cannot have a newline at the end. Please remove it.");
-  #endif
-  #ifdef USER_GCODE_25
-    constexpr char _chr25 = USER_GCODE_25[strlen(USER_GCODE_25) - 1];
-    static_assert(_chr25 != '\n' && _chr25 != '\r', "USER_GCODE_25 cannot have a newline at the end. Please remove it.");
-  #endif
-#endif
-
 #if ENABLED(BACKLASH_COMPENSATION)
   #ifndef BACKLASH_DISTANCE_MM
     #error "BACKLASH_COMPENSATION requires BACKLASH_DISTANCE_MM."

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/custom_user_menus.cpp

@@ -30,8 +30,8 @@ using namespace ExtUI;
 using namespace Theme;
 
 #define _ITEM_TAG(N) (10+N)
-#define _USER_DESC(N) USER_DESC_##N
-#define _USER_GCODE(N) USER_GCODE_##N
+#define _USER_DESC(N) MAIN_MENU_ITEM_##N##_DESC
+#define _USER_GCODE(N) MAIN_MENU_ITEM_##N##_GCODE
 #define _USER_ITEM(N) .tag(_ITEM_TAG(N)).button(USER_ITEM_POS(N), _USER_DESC(N))
 #define _USER_ACTION(N) case _ITEM_TAG(N): injectCommands_P(PSTR(_USER_GCODE(N))); TERN_(USER_SCRIPT_RETURN, GOTO_SCREEN(StatusScreen)); break;
 

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp

@@ -41,9 +41,9 @@ void MainMenu::onRedraw(draw_mode_t what) {
     #define GRID_COLS 2
     #define ABOUT_PRINTER_POS     BTN_POS(1,1), BTN_SIZE(2,1)
     #define ADVANCED_SETTINGS_POS BTN_POS(1,2), BTN_SIZE(2,1)
-    #if ENABLED(CUSTOM_USER_MENUS)
+    #if ENABLED(CUSTOM_MENU_MAIN)
       #define FILAMENTCHANGE_POS  BTN_POS(1,3), BTN_SIZE(1,1)
-      #define CUSTOM_USER_MENUS_POS BTN_POS(2,3), BTN_SIZE(1,1)
+      #define CUSTOM_MENU_POS BTN_POS(2,3), BTN_SIZE(1,1)
     #else
       #define FILAMENTCHANGE_POS  BTN_POS(1,3), BTN_SIZE(2,1)
     #endif
@@ -63,10 +63,10 @@ void MainMenu::onRedraw(draw_mode_t what) {
     #define CLEAN_NOZZLE_POS      BTN_POS(4,2), BTN_SIZE(3,1)
     #define MOVE_AXIS_POS         BTN_POS(1,3), BTN_SIZE(3,1)
     #define DISABLE_STEPPERS_POS  BTN_POS(4,3), BTN_SIZE(3,1)
-    #if ENABLED(CUSTOM_USER_MENUS)
+    #if ENABLED(CUSTOM_MENU_MAIN)
       #define TEMPERATURE_POS     BTN_POS(1,4), BTN_SIZE(2,1)
       #define FILAMENTCHANGE_POS  BTN_POS(3,4), BTN_SIZE(2,1)
-      #define CUSTOM_USER_MENUS_POS BTN_POS(5,4), BTN_SIZE(2,1)
+      #define CUSTOM_MENU_POS BTN_POS(5,4), BTN_SIZE(2,1)
     #else
       #define TEMPERATURE_POS     BTN_POS(1,4), BTN_SIZE(3,1)
       #define FILAMENTCHANGE_POS  BTN_POS(4,4), BTN_SIZE(3,1)
@@ -91,8 +91,8 @@ void MainMenu::onRedraw(draw_mode_t what) {
        .enabled(TERN_(HAS_LEVELING, 1))
        .tag( 9).button(LEVELING_POS,        GET_TEXT_F(MSG_LEVELING))
        .tag(10).button(ABOUT_PRINTER_POS,   GET_TEXT_F(MSG_INFO_MENU))
-       #if ENABLED(CUSTOM_USER_MENUS)
-        .tag(11).button(CUSTOM_USER_MENUS_POS, GET_TEXT_F(MSG_USER_MENU))
+       #if ENABLED(CUSTOM_MENU_MAIN)
+        .tag(11).button(CUSTOM_MENU_POS, GET_TEXT_F(MSG_CUSTOM_COMMANDS))
        #endif
        .colors(action_btn)
        .tag(1).button(BACK_POS,             GET_TEXT_F(MSG_BACK));
@@ -117,7 +117,7 @@ bool MainMenu::onTouchEnd(uint8_t tag) {
       case 9:  GOTO_SCREEN(LevelingMenu);                             break;
     #endif
     case 10: GOTO_SCREEN(AboutScreen);                                break;
-    #if ENABLED(CUSTOM_USER_MENUS)
+    #if ENABLED(CUSTOM_MENU_MAIN)
       case 11: GOTO_SCREEN(CustomUserMenus);                          break;
     #endif
 

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.h

@@ -22,8 +22,6 @@
 
 #pragma once
 
-#if ENABLED(TOUCH_UI_FTDI_EVE)
-
 #include "../ftdi_eve_lib/ftdi_eve_lib.h"
 #include "../language/language.h"
 #include "../theme/theme.h"
@@ -107,7 +105,7 @@ enum {
   #if ENABLED(SDSUPPORT)
     FILES_SCREEN_CACHE,
   #endif
-  #if ENABLED(CUSTOM_USER_MENUS)
+  #if ENABLED(CUSTOM_MENU_MAIN)
     CUSTOM_USER_MENUS_SCREEN_CACHE,
   #endif
   CHANGE_FILAMENT_SCREEN_CACHE,
@@ -248,7 +246,7 @@ enum {
   #include "files_screen.h"
 #endif
 
-#if ENABLED(CUSTOM_USER_MENUS)
+#if ENABLED(CUSTOM_MENU_MAIN)
   #include "custom_user_menus.h"
 #endif
 
@@ -262,5 +260,3 @@ enum {
 #if NUM_LANGUAGES > 1
   #include "language_menu.h"
 #endif
-
-#endif // TOUCH_UI_FTDI_EVE

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_en.h

@@ -728,9 +728,9 @@
 #define EEPROM_READ_TIPS_EN   "Read settings from EEPROM?"
 #define EEPROM_REVERT_TIPS_EN "Revert settings to factory defaults?"
 
-#define MORE_CUSTOM1_TEXT_EN  USER_DESC_1
-#define MORE_CUSTOM2_TEXT_EN  USER_DESC_2
-#define MORE_CUSTOM3_TEXT_EN  USER_DESC_3
-#define MORE_CUSTOM4_TEXT_EN  USER_DESC_4
-#define MORE_CUSTOM5_TEXT_EN  USER_DESC_5
-#define MORE_CUSTOM6_TEXT_EN  USER_DESC_6
+#define MORE_CUSTOM1_TEXT_EN  MAIN_MENU_ITEM_1_DESC
+#define MORE_CUSTOM2_TEXT_EN  MAIN_MENU_ITEM_2_DESC
+#define MORE_CUSTOM3_TEXT_EN  MAIN_MENU_ITEM_3_DESC
+#define MORE_CUSTOM4_TEXT_EN  MAIN_MENU_ITEM_4_DESC
+#define MORE_CUSTOM5_TEXT_EN  MAIN_MENU_ITEM_5_DESC
+#define MORE_CUSTOM6_TEXT_EN  MAIN_MENU_ITEM_6_DESC

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_fr.h

@@ -260,9 +260,9 @@
 #define EEPROM_READ_TIPS_FR   "Lire les paramètres de l'EEPROM?"
 #define EEPROM_REVERT_TIPS_FR "Rétablir les paramètres par défaut d'usine?"
 
-#define MORE_CUSTOM1_TEXT_FR  USER_DESC_1
-#define MORE_CUSTOM2_TEXT_FR  USER_DESC_2
-#define MORE_CUSTOM3_TEXT_FR  USER_DESC_3
-#define MORE_CUSTOM4_TEXT_FR  USER_DESC_4
-#define MORE_CUSTOM5_TEXT_FR  USER_DESC_5
-#define MORE_CUSTOM6_TEXT_FR  USER_DESC_6
+#define MORE_CUSTOM1_TEXT_FR  MAIN_MENU_ITEM_1_DESC
+#define MORE_CUSTOM2_TEXT_FR  MAIN_MENU_ITEM_2_DESC
+#define MORE_CUSTOM3_TEXT_FR  MAIN_MENU_ITEM_3_DESC
+#define MORE_CUSTOM4_TEXT_FR  MAIN_MENU_ITEM_4_DESC
+#define MORE_CUSTOM5_TEXT_FR  MAIN_MENU_ITEM_5_DESC
+#define MORE_CUSTOM6_TEXT_FR  MAIN_MENU_ITEM_6_DESC

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_it.h

@@ -257,9 +257,9 @@
 #define EEPROM_READ_TIPS_IT               "Leggi le impostazioni dalla EEPROM?"
 #define EEPROM_REVERT_TIPS_IT             "Ripristinare le impostazioni predefinite?"
 
-#define MORE_CUSTOM1_TEXT_IT  USER_DESC_1
-#define MORE_CUSTOM2_TEXT_IT  USER_DESC_2
-#define MORE_CUSTOM3_TEXT_IT  USER_DESC_3
-#define MORE_CUSTOM4_TEXT_IT  USER_DESC_4
-#define MORE_CUSTOM5_TEXT_IT  USER_DESC_5
-#define MORE_CUSTOM6_TEXT_IT  USER_DESC_6
+#define MORE_CUSTOM1_TEXT_IT  MAIN_MENU_ITEM_1_DESC
+#define MORE_CUSTOM2_TEXT_IT  MAIN_MENU_ITEM_2_DESC
+#define MORE_CUSTOM3_TEXT_IT  MAIN_MENU_ITEM_3_DESC
+#define MORE_CUSTOM4_TEXT_IT  MAIN_MENU_ITEM_4_DESC
+#define MORE_CUSTOM5_TEXT_IT  MAIN_MENU_ITEM_5_DESC
+#define MORE_CUSTOM6_TEXT_IT  MAIN_MENU_ITEM_6_DESC

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_ru.h

@@ -255,12 +255,12 @@
 #define EEPROM_SETTINGS_READ_RU       "Чтение настроек из EEPROM"
 #define EEPROM_SETTINGS_REVERT_RU     "Bосстановить заводские настройки по умолчанию"
 
-#define MORE_CUSTOM1_TEXT_RU  USER_DESC_1
-#define MORE_CUSTOM2_TEXT_RU  USER_DESC_2
-#define MORE_CUSTOM3_TEXT_RU  USER_DESC_3
-#define MORE_CUSTOM4_TEXT_RU  USER_DESC_4
-#define MORE_CUSTOM5_TEXT_RU  USER_DESC_5
-#define MORE_CUSTOM6_TEXT_RU  USER_DESC_6
+#define MORE_CUSTOM1_TEXT_RU  MAIN_MENU_ITEM_1_DESC
+#define MORE_CUSTOM2_TEXT_RU  MAIN_MENU_ITEM_2_DESC
+#define MORE_CUSTOM3_TEXT_RU  MAIN_MENU_ITEM_3_DESC
+#define MORE_CUSTOM4_TEXT_RU  MAIN_MENU_ITEM_4_DESC
+#define MORE_CUSTOM5_TEXT_RU  MAIN_MENU_ITEM_5_DESC
+#define MORE_CUSTOM6_TEXT_RU  MAIN_MENU_ITEM_6_DESC
 
 #define EEPROM_STORE_TIPS_RU          "Cохранить настройки в EEPROM?"
 #define EEPROM_READ_TIPS_RU           "читать настройки из EEPROM?"