-
Notifications
You must be signed in to change notification settings - Fork 8
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Update sys. Switch to open source scaler.
- Loading branch information
Showing
26 changed files
with
3,568 additions
and
1,173 deletions.
There are no files selected for viewing
This file was deleted.
Oops, something went wrong.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,12 @@ | ||
| # | ||
| # please keep this file read-only! | ||
| # Quartus changes this file everytime revision is switched, | ||
| # and it will be marked as changed with every commit. | ||
| # | ||
|
|
||
| QUARTUS_VERSION = "16.1" | ||
| DATE = "23:13:02 April 27, 2017" | ||
|
|
||
| # Revisions | ||
|
|
||
| PROJECT_REVISION = "BK0011M-vip" |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,29 @@ | ||
| { "" "" "" "Vip.Mixer: The MixerII register map changed in ACDS v16.0. Please refer to the VIP User Guide for details." { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Reset_Source.reset_sys: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Reset_Source.reset_warm: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Reset_Source.reset_cold: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Video_Output.control: Interrupt sender control.av_mm_control_interrupt is not connected to an interrupt receiver" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Video_Output: Interrupt sender Video_Output.status_update_irq is not connected to an interrupt receiver" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.: You have exported the interface HPS.f2h_sdram1_data but not its associated reset interface. Export the driver(s) of HPS.h2f_reset" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.: You have exported the interface HPS.f2h_sdram2_data but not its associated reset interface. Export the driver(s) of HPS.h2f_reset" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Variable or input pin \"data_b\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Variable or input pin \"data_a\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Port \"extclk\" on the entity instantiation of \"cyclonev_pll\" is connected to a signal of width 1. The formal width of the signal in the module is 2. The extra bits will be left dangling without any fan-out logic." { } { } 0 12030 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Port \"trs\" on the entity instantiation of \"statemachine\" is connected to a signal of width 2. The formal width of the signal in the module is 1. The extra bits will be ignored." { } { } 0 12020 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Port \"reset_value\" on the entity instantiation of \"h_counter\" is connected to a signal of width 32. The formal width of the signal in the module is 16. The extra bits will be ignored." { } { } 0 12020 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Overwriting existing clock: vip\|hps\|fpga_interfaces\|clocks_resets\|h2f_user0_clk" { } { } 0 332043 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "LOCKED port on the PLL is not properly connected on instance \"emu:emu\|pll:pll\|pll_0002:pll_inst\|altera_pll:altera_pll_i\|general\[0\].gpll\". The LOCKED port on the PLL should be connected when the FBOUTCLK port is connected. Although it is unnecessary to connect the LOCKED signal, any logic driven off of an output clock of the PLL will not know when the PLL is locked and ready." { } { } 0 21300 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.vip: Module dependency loop involving: \"HPS\"" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_common_frame_counter.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_cvo_mode_banks.sv" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_cyclonev_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_pll_reconfig_core.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "genlock_enable_sync" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "u_calculate_mode" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "mode_banks" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "RST port on the PLL is not properly connected" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_cvo_core.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_packet_transfer.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_common_dc_mixed_widths_fifo.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "vip_HPS_fpga_interfaces.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
|
|
@@ -10,4 +10,3 @@ DATE = "23:13:02 April 27, 2017" | |
| # Revisions | ||
|
|
||
| PROJECT_REVISION = "BK0011M" | ||
| PROJECT_REVISION = "BK0011M-lite" | ||
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -1,29 +1,25 @@ | ||
| { "" "" "" "Vip.Mixer: The MixerII register map changed in ACDS v16.0. Please refer to the VIP User Guide for details." { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Reset_Source.reset_sys: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Reset_Source.reset_warm: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Reset_Source.reset_cold: Associated reset sinks not declared" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Video_Output.control: Interrupt sender control.av_mm_control_interrupt is not connected to an interrupt receiver" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.Video_Output: Interrupt sender Video_Output.status_update_irq is not connected to an interrupt receiver" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.: You have exported the interface HPS.f2h_sdram1_data but not its associated reset interface. Export the driver(s) of HPS.h2f_reset" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.: You have exported the interface HPS.f2h_sdram2_data but not its associated reset interface. Export the driver(s) of HPS.h2f_reset" { } { } 0 12251 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Variable or input pin \"data_b\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Variable or input pin \"data_a\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Inferred RAM node \"emu:emu\|mister_io:mister_io\|ps2_kbd_fifo_rtl_0\" from synchronous design logic. Pass-through logic has been added to match the read-during-write behavior of the original design." { } { } 0 276020 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Inferred RAM node \"emu:emu\|mister_io:mister_io\|ps2_mouse_fifo_rtl_0\" from synchronous design logic. Pass-through logic has been added to match the read-during-write behavior of the original design." { } { } 0 276020 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Synthesized away node \"emu:emu\|pll:pll\|pll_0002:pll_inst\|altera_pll:altera_pll_i\|outclk_wire\[2\]\"" { } { } 0 14320 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "RST port on the PLL is not properly connected on instance emu:emu\|pll:pll\|pll_0002:pll_inst\|altera_pll:altera_pll_i\|general\[1\].gpll. The reset port on the PLL should be connected. If the PLL loses lock for any reason, you might need to manually reset the PLL in order to re-establish lock to the reference clock." { } { } 0 0 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "RST port on the PLL is not properly connected on instance emu:emu\|pll:pll\|pll_0002:pll_inst\|altera_pll:altera_pll_i\|general\[0\].gpll. The reset port on the PLL should be connected. If the PLL loses lock for any reason, you might need to manually reset the PLL in order to re-establish lock to the reference clock." { } { } 0 0 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Ignored locations or region assignments to the following nodes" { } { } 0 15705 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "RST port on the PLL is not properly connected on instance emu:emu\|pll:pll\|pll_0002:pll_inst\|altera_pll:altera_pll_i\|general\[2\].gpll. The reset port on the PLL should be connected. If the PLL loses lock for any reason, you might need to manually reset the PLL in order to re-establish lock to the reference clock." { } { } 0 0 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Verilog HDL or VHDL warning at de10_top.v(129): object \"io_win\" assigned a value but never read" { } { } 0 10036 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Verilog HDL or VHDL warning at de10_top.v(134): object \"io_sdd\" assigned a value but never read" { } { } 0 10036 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Verilog HDL or VHDL warning at de10_top.v(97): object \"io_win\" assigned a value but never read" { } { } 0 10036 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Verilog HDL or VHDL warning at de10_top.v(102): object \"io_sdd\" assigned a value but never read" { } { } 0 10036 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "LOCKED port on the PLL is not properly connected on instance \"pll_hdmi:pll_hdmi\|pll_hdmi_0002:pll_hdmi_inst\|altera_pll:altera_pll_i\|general\[0\].gpll\". The LOCKED port on the PLL should be connected when the FBOUTCLK port is connected. Although it is unnecessary to connect the LOCKED signal, any logic driven off of an output clock of the PLL will not know when the PLL is locked and ready." { } { } 0 21300 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Ignored filter at sys_top.sdc(17): vip\|output_inst\|vid_clk could not be matched with a net" { } { } 0 332174 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Ignored create_generated_clock at sys_top.sdc(16): Argument <targets> is an empty collection" { } { } 0 332049 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Ignored filter at sys_top.sdc(38): VID_CLK could not be matched with a clock" { } { } 0 332174 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Port \"extclk\" on the entity instantiation of \"cyclonev_pll\" is connected to a signal of width 1. The formal width of the signal in the module is 2. The extra bits will be left dangling without any fan-out logic." { } { } 0 12030 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Port \"trs\" on the entity instantiation of \"statemachine\" is connected to a signal of width 2. The formal width of the signal in the module is 1. The extra bits will be ignored." { } { } 0 12020 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Port \"reset_value\" on the entity instantiation of \"h_counter\" is connected to a signal of width 32. The formal width of the signal in the module is 16. The extra bits will be ignored." { } { } 0 12020 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Overwriting existing clock: vip\|hps\|fpga_interfaces\|clocks_resets\|h2f_user0_clk" { } { } 0 332043 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "LOCKED port on the PLL is not properly connected on instance \"emu:emu\|pll:pll\|pll_0002:pll_inst\|altera_pll:altera_pll_i\|general\[0\].gpll\". The LOCKED port on the PLL should be connected when the FBOUTCLK port is connected. Although it is unnecessary to connect the LOCKED signal, any logic driven off of an output clock of the PLL will not know when the PLL is locked and ready." { } { } 0 21300 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Vip.vip: Module dependency loop involving: \"HPS\"" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_common_frame_counter.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_cvo_mode_banks.sv" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_cyclonev_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "Ignored filter at sys_top.sdc(36): VID_CLK could not be matched with a clock" { } { } 0 332174 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "*" { } { } 0 21074 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "*" { } { } 0 276027 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "RST" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "sysmem_HPS_fpga_interfaces.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_pll_reconfig_core.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "genlock_enable_sync" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "u_calculate_mode" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "mode_banks" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "RST port on the PLL is not properly connected" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_cvo_core.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_packet_transfer.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "alt_vip_common_dc_mixed_widths_fifo.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "vip_HPS_fpga_interfaces.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_cyclonev_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} | ||
| { "" "" "" "altera_pll.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""} |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Oops, something went wrong.