[config] Enable AXP15060 regulator #1

Manorhos · 2024-01-11T20:52:59Z

Needed on Star64 for CPUFreq support. Without it, the CPU was stuck at 750 MHz, now reclocking works and it can run at 1.5 GHz.

Thanks for working on support for this SBC, btw! I built the kernel with amdgpu and am running DietPi with an AMD Radeon HD 7870, runs quite well!

Add vin device node. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

Enable vin. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

Add the HiFi4/XRP node for the Starfive JH7110 SoC. Signed-off-by: carter.li <carter.li@starfivetech.com>

This commit combines all patches about the host driver from JH7110_515_SDK_v5.1.3. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

PCIe 1 is enabled and PCIe 0 is disabled by default, that is the same as linux 5.1x. Besides, add jh7110-evb-pcie-i2s-sd.dts with pcie/usb/i2c/uart nodes. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

1. Add PLDA PCIe host controller support. 2. Add NVMe support. 3. Add cfg80211/mac80211 & iwlwifi support.(For AX210) 4. Cancel module config for DRM_NOUVEAU. (GT710...) Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

To workaroud the NVMe I/O timeout problem in bootup S10udev case which caused by the CQE update lantancy. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

Update video pipeline set fmt. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

Update csi pix cfg. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

Add PWMDAC drivers of StarFive JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

Add PWMDAC node in JH7110 DTS. Add new codecs file about PWMDAC codec and sound-card-3 nodes. Add new dts file about PWMDAC for JH7110 EVB. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

Enable PWMDAC module in starfive_jh7110_defconfig Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

To support chips that CPU can only run on 1.25GHz, add a opp table for 1.25GHz. The 1.5GHz opp table is not compatible with the 1.25GHz opp table, and one of them will be remove when before booting kernel. Signed-off-by: Mason Huo <mason.huo@starfivetech.com>

Add SPDIF and SPDIF-PCM driver for StarFive JH7110. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

Add SPDIF node and drop the SPDIF codec node in JH7110 DTS. Add new codecs file about SPDIF codec and sound-card-4 nodes. Add new dts file about SPDIF for JH7110 EVB. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

Enable SPDIF and SPDIF Codec in starfive_jh7110_defconfig Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

StarFive SoCs like the jh7110 use display system based on verisilicon IP, use hdmi base on innosilicon IP. Add bindings for them. Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

Add driver for the StarFive JH7110 display subsystem Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

Add vout dts node to support JH7110 display function Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

replace the condition to avoid kernel panic Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>

Add vout deconfig Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

Add documentation to describe StarFive cryptographic engine. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

Adding device probe and DMA init for StarFive cryptographic module. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

Add StarFive cryptographic module and dedicated DMA controller node to JH7110 SoCs. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

enbale encryption module Signed-off-by: William Qiu <william.qiu@starfivetech.com>

Add the flags for handling signature generation and signature verification. The af_alg helper code as well as the algif_skcipher and algif_aead code must be changed from a boolean indicating the cipher operation to an integer because there are now 4 different cipher operations that are defined. Yet, the algif_aead and algif_skcipher code still only allows encryption and decryption cipher operations. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>

For supporting asymmetric ciphers, user space must be able to set the public key. The patch adds a new setsockopt call for setting the public key. Signed-off-by: Stephan Mueller <smueller@chronox.de>

This patch adds the user space interface for asymmetric ciphers. The interface allows the use of sendmsg as well as vmsplice to provide data. The akcipher interface implementation uses the common AF_ALG interface code regarding TX and RX SGL handling. Signed-off-by: Stephan Mueller <smueller@chronox.de>

Add documentation to describe StarFive CAN engine. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

Adding device probe StarFive CAN module. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

commit ab9e0c5 upstream. If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 starfive-tech#47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed. Fixes: dafd6c4 ("libata: ensure host is free'd on error exit paths") Cc: stable@vger.kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240629124210.181537-9-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bab4923 upstream. In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from qdisc->dev_queue->dev <NULL> ->name This situation simulated from bunch of veths and Bluetooth disconnection and reconnection. During qdisc initialization, qdisc was being set to noop_queue. In veth_init_queue, the initial tx_num was reduced back to one, causing the qdisc reset to be called with noop, which led to the kernel panic. I've attached the GitHub gist link that C converted syz-execprogram source code and 3 log of reproduced vmcore-dmesg. https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740 Yeoreum and I use two fuzzing tool simultaneously. One process with syz-executor : https://github.com/google/syzkaller $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \ -enable=none -collide=false log1 The other process with perf fuzzer: https://github.com/deater/perf_event_tests/tree/master/fuzzer $ perf_event_tests/fuzzer/perf_fuzzer I think this will happen on the kernel version. Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10. This occurred from 51270d5. I think this patch is absolutely necessary. Previously, It was showing not intended string value of name. I've reproduced 3 time from my fedora 40 Debug Kernel with any other module or patched. version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug [ 5287.164555] veth0_vlan: left promiscuous mode [ 5287.164929] veth1_macvtap: left promiscuous mode [ 5287.164950] veth0_macvtap: left promiscuous mode [ 5287.164983] veth1_vlan: left promiscuous mode [ 5287.165008] veth0_vlan: left promiscuous mode [ 5287.165450] veth1_macvtap: left promiscuous mode [ 5287.165472] veth0_macvtap: left promiscuous mode [ 5287.165502] veth1_vlan: left promiscuous mode … [ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state [ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state [ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state [ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state [ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state [ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state [ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0 [ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state … [ 5298.002798] bridge_slave_0: left promiscuous mode [ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state [ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface [ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface [ 5298.320207] bond0 (unregistering): Released all slaves [ 5298.354296] hsr_slave_0: left promiscuous mode [ 5298.360750] hsr_slave_1: left promiscuous mode [ 5298.374889] veth1_macvtap: left promiscuous mode [ 5298.374931] veth0_macvtap: left promiscuous mode [ 5298.374988] veth1_vlan: left promiscuous mode [ 5298.375024] veth0_vlan: left promiscuous mode [ 5299.109741] team0 (unregistering): Port device team_slave_1 removed [ 5299.185870] team0 (unregistering): Port device team_slave_0 removed … [ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1 [ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9 [ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9 …. [ 5301.075531] team0: Port device team_slave_1 added [ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state [ 5301.085588] bridge_slave_0: entered allmulticast mode [ 5301.085800] bridge_slave_0: entered promiscuous mode [ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state … [ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.193481] hsr_slave_0: entered promiscuous mode [ 5301.204425] hsr_slave_1: entered promiscuous mode [ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.210185] Cannot create hsr debugfs directory [ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.255934] team0: Port device team_slave_0 added [ 5301.256480] team0: Port device team_slave_1 added [ 5301.256948] team0: Port device team_slave_0 added … [ 5301.435928] hsr_slave_0: entered promiscuous mode [ 5301.446029] hsr_slave_1: entered promiscuous mode [ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.455884] Cannot create hsr debugfs directory [ 5301.502664] hsr_slave_0: entered promiscuous mode [ 5301.513675] hsr_slave_1: entered promiscuous mode [ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.526164] Cannot create hsr debugfs directory [ 5301.563662] hsr_slave_0: entered promiscuous mode [ 5301.576129] hsr_slave_1: entered promiscuous mode [ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.580270] Cannot create hsr debugfs directory [ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137] [ 5301.595877] Mem abort info: [ 5301.595881] ESR = 0x0000000096000006 [ 5301.595885] EC = 0x25: DABT (current EL), IL = 32 bits [ 5301.595889] SET = 0, FnV = 0 [ 5301.595893] EA = 0, S1PTW = 0 [ 5301.595896] FSC = 0x06: level 2 translation fault [ 5301.595900] Data abort info: [ 5301.595903] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 5301.595907] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 5301.595911] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 5301.595915] [dfff800000000026] address between user and kernel address ranges [ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP … [ 5301.596076] CPU: 2 PID: 102769 Comm: syz-executor.3 Kdump: loaded Tainted: G W ------- --- 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1 [ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 5301.596085] pc : strnlen+0x40/0x88 [ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596124] sp : ffff8000beef6b40 [ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001 [ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00 [ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140 [ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8 [ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006 [ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5 [ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec [ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200 [ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1 [ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130 [ 5301.596166] Call trace: [ 5301.596175] strnlen+0x40/0x88 [ 5301.596179] trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596182] perf_trace_qdisc_reset+0xb0/0x538 [ 5301.596184] __traceiter_qdisc_reset+0x68/0xc0 [ 5301.596188] qdisc_reset+0x43c/0x5e8 [ 5301.596190] netif_set_real_num_tx_queues+0x288/0x770 [ 5301.596194] veth_init_queues+0xfc/0x130 [veth] [ 5301.596198] veth_newlink+0x45c/0x850 [veth] [ 5301.596202] rtnl_newlink_create+0x2c8/0x798 [ 5301.596205] __rtnl_newlink+0x92c/0xb60 [ 5301.596208] rtnl_newlink+0xd8/0x130 [ 5301.596211] rtnetlink_rcv_msg+0x2e0/0x890 [ 5301.596214] netlink_rcv_skb+0x1c4/0x380 [ 5301.596225] rtnetlink_rcv+0x20/0x38 [ 5301.596227] netlink_unicast+0x3c8/0x640 [ 5301.596231] netlink_sendmsg+0x658/0xa60 [ 5301.596234] __sock_sendmsg+0xd0/0x180 [ 5301.596243] __sys_sendto+0x1c0/0x280 [ 5301.596246] __arm64_sys_sendto+0xc8/0x150 [ 5301.596249] invoke_syscall+0xdc/0x268 [ 5301.596256] el0_svc_common.constprop.0+0x16c/0x240 [ 5301.596259] do_el0_svc+0x48/0x68 [ 5301.596261] el0_svc+0x50/0x188 [ 5301.596265] el0t_64_sync_handler+0x120/0x130 [ 5301.596268] el0t_64_sync+0x194/0x198 [ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842) [ 5301.596285] SMP: stopping secondary CPUs [ 5301.597053] Starting crashdump kernel... [ 5301.597057] Bye! After applying our patch, I didn't find any kernel panic errors. We've found a simple reproducer # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable # ip link add veth0 type veth peer name veth1 Error: Unknown device type. However, without our patch applied, I tested upstream 6.10.0-rc3 kernel using the qdisc_reset event and the ip command on my qemu virtual machine. This 2 commands makes always kernel panic. Linux version: 6.10.0-rc3 [ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty (paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld version 2.41-34.fc40) starfive-tech#20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024 Kernel panic message: [ 615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 615.237250] Dumping ftrace buffer: [ 615.237679] (ftrace buffer empty) [ 615.238097] Modules linked in: veth crct10dif_ce virtio_gpu virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6 Jun 22 02:36:5[3 6k152.62-4sm98k4-0k]v kCePUr:n e1l :P IUDn:a b4le6 8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0 1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08 615.252376] Hardware name: linux,dummy-virt (DT) [ 615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 615.254433] pc : strnlen+0x6c/0xe0 [ 615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.256088] sp : ffff800080b269a0 [ 615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27: 0000000000000001 [ 615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24: ffffc070f619cf60 [ 615.259020] x23: 0000000000000128 x22: 0000000000000138 x21: dfff800000000000 [ 615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18: ffffc070f448b800 [ 615.261454] x17: 0000000000000000 x16: 0000000000000001 x15: ffffc070f4ba2a90 [ 615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12: 1ffff00010164d72 [ 615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 : ffffc070e85d6184 [ 615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 : 000000001504a6d3 [ 615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 : 0000000000000000 [ 615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 : 0000000000000000 [ 615.268747] Call trace: [ 615.269180] strnlen+0x6c/0xe0 [ 615.269767] trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.270716] trace_event_raw_event_qdisc_reset+0xe8/0x4e8 [ 615.271667] __traceiter_qdisc_reset+0xa0/0x140 [ 615.272499] qdisc_reset+0x554/0x848 [ 615.273134] netif_set_real_num_tx_queues+0x360/0x9a8 [ 615.274050] veth_init_queues+0x110/0x220 [veth] [ 615.275110] veth_newlink+0x538/0xa50 [veth] [ 615.276172] __rtnl_newlink+0x11e4/0x1bc8 [ 615.276944] rtnl_newlink+0xac/0x120 [ 615.277657] rtnetlink_rcv_msg+0x4e4/0x1370 [ 615.278409] netlink_rcv_skb+0x25c/0x4f0 [ 615.279122] rtnetlink_rcv+0x48/0x70 [ 615.279769] netlink_unicast+0x5a8/0x7b8 [ 615.280462] netlink_sendmsg+0xa70/0x1190 Yeoreum and I don't know if the patch we wrote will fix the underlying cause, but we think that priority is to prevent kernel panic happening. So, we're sending this patch. Fixes: 51270d5 ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string") Link: https://lore.kernel.org/lkml/20240229143432.273b4871@gandalf.local.home/t/ Cc: netdev@vger.kernel.org Tested-by: Yunseong Kim <yskelg@gmail.com> Signed-off-by: Yunseong Kim <yskelg@gmail.com> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Link: https://lore.kernel.org/r/20240624173320.24945-4-yskelg@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit af9a873 ] During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 starfive-tech#33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once. Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Reviewed-by: Lu Zhongjun <lu.zhongjun@zte.com.cn> Reviewed-by: Yang Tao <yang.tao172@zte.com.cn> Cc: Xu Xin <xu.xin16@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e271ff5 ] In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc1/0x5e0 mm/kasan/report.c:475 kasan_report+0xbe/0xf0 mm/kasan/report.c:588 strlen+0x7d/0xa0 lib/string.c:418 __fortify_strlen include/linux/fortify-string.h:210 [inline] in4_pton+0xa3/0x3f0 net/core/utils.c:130 bond_option_arp_ip_targets_set+0xc2/0x910 drivers/net/bonding/bond_options.c:1201 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156 dev_attr_store+0x54/0x80 drivers/base/core.c:2366 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x96a/0xd80 fs/read_write.c:584 ksys_write+0x122/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace ]--- Fix it by adding a check of string length before using it. Fixes: f9de11a ("bonding: add ip checks when store ip target") Signed-off-by: Yue Sun <samsun1006219@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…uring reclaim commit 48f091f upstream. There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Suggested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com> Fixes: 4eb4e85 ("btrfs: retry block group reclaim without infinite loop") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9a95c5b upstream. A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423db ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. Fixes: c7423db ("ima: Handle -ESTALE returned by ima_filter_rule_match()") Cc: stable@vger.kernel.org Signed-off-by: GUO Zihua <guozihua@huawei.com> Acked-by: John Johansen <john.johansen@canonical.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Casey Schaufler <casey@schaufler-ca.com> [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f0c1802 ] When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ starfive-tech#18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/e3a16eacdc6740658ee02a33489b1b9d4912f378.1719992715.git.tanggeliang@kylinos.cn Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4db783d upstream. According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 778d80b ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [Ashwin: Regenerated the Patch for v5.15] Signed-off-by: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 92ecbb3 ] When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've noticed the following: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4 index 0 is out of range for type 'struct ieee80211_channel *[]' CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1 Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...> Call Trace: <TASK> dump_stack_lvl+0x2d/0x90 __ubsan_handle_out_of_bounds+0xe7/0x140 ? timerqueue_add+0x98/0xb0 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211] ? __kmalloc+0xe1/0x470 __ieee80211_start_scan+0x541/0x760 [mac80211] rdev_scan+0x1f/0xe0 [cfg80211] nl80211_trigger_scan+0x9b6/0xae0 [cfg80211] ...<the rest is not too useful...> Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels' uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't be checked in 'ieee80211_prep_hw_scan()'. Although an initialization of 'hw_scan_req->req.n_channels' introduces some confusion around allocated vs. used VLA members, this shouldn't be a problem since everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'. Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the convenient 'struct_size()' as well. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru [improve (imho) indentation a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a986fa5 ] Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Closes: https://lore.kernel.org/all/20240610024437.GA1464458@ZenIV/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240614122910.3499489-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1a14150 ] Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 starfive-tech#85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object. Co-developed-by: Vishal Chourasia <vishalc@linux.ibm.com> Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com> Signed-off-by: Anjali K <anjalik@linux.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240614173844.746818-1-anjalik@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit af9a873 ] During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 starfive-tech#33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once. Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Reviewed-by: Lu Zhongjun <lu.zhongjun@zte.com.cn> Reviewed-by: Yang Tao <yang.tao172@zte.com.cn> Cc: Xu Xin <xu.xin16@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit efb905a ] When running syzkaller with the newly reintroduced signed integer wrap sanitizer we encounter this splat: [ 366.015950] UBSAN: signed-integer-overflow in ../drivers/cdrom/cdrom.c:2361:33 [ 366.021089] -9223372036854775808 - 346321 cannot be represented in type '__s64' (aka 'long long') [ 366.025894] program syz-executor.4 is using a deprecated SCSI ioctl, please convert it to SG_IO [ 366.027502] CPU: 5 PID: 28472 Comm: syz-executor.7 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 366.027512] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 366.027518] Call Trace: [ 366.027523] <TASK> [ 366.027533] dump_stack_lvl+0x93/0xd0 [ 366.027899] handle_overflow+0x171/0x1b0 [ 366.038787] ata1.00: invalid multi_count 32 ignored [ 366.043924] cdrom_ioctl+0x2c3f/0x2d10 [ 366.063932] ? __pm_runtime_resume+0xe6/0x130 [ 366.071923] sr_block_ioctl+0x15d/0x1d0 [ 366.074624] ? __pfx_sr_block_ioctl+0x10/0x10 [ 366.077642] blkdev_ioctl+0x419/0x500 [ 366.080231] ? __pfx_blkdev_ioctl+0x10/0x10 ... Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang. It was re-enabled in the kernel with Commit 557f8c5 ("ubsan: Reintroduce signed overflow sanitizer"). Let's rearrange the check to not perform any arithmetic, thus not tripping the sanitizer. Link: llvm/llvm-project#82432 [1] Closes: KSPP/linux#354 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/lkml/20240507-b4-sio-ata1-v1-1-810ffac6080a@google.com Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/lkml/ZjqU0fbzHrlnad8D@equinox Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20240507222520.1445-2-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e271ff5 ] In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc1/0x5e0 mm/kasan/report.c:475 kasan_report+0xbe/0xf0 mm/kasan/report.c:588 strlen+0x7d/0xa0 lib/string.c:418 __fortify_strlen include/linux/fortify-string.h:210 [inline] in4_pton+0xa3/0x3f0 net/core/utils.c:130 bond_option_arp_ip_targets_set+0xc2/0x910 drivers/net/bonding/bond_options.c:1201 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156 dev_attr_store+0x54/0x80 drivers/base/core.c:2366 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x96a/0xd80 fs/read_write.c:584 ksys_write+0x122/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace ]--- Fix it by adding a check of string length before using it. Fixes: f9de11a ("bonding: add ip checks when store ip target") Signed-off-by: Yue Sun <samsun1006219@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…uring reclaim commit 48f091f upstream. There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Suggested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com> Fixes: 4eb4e85 ("btrfs: retry block group reclaim without infinite loop") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9a95c5b upstream. A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423db ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. Fixes: c7423db ("ima: Handle -ESTALE returned by ima_filter_rule_match()") Cc: stable@vger.kernel.org Signed-off-by: GUO Zihua <guozihua@huawei.com> Acked-by: John Johansen <john.johansen@canonical.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Casey Schaufler <casey@schaufler-ca.com> [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f0c1802 ] When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ starfive-tech#18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/e3a16eacdc6740658ee02a33489b1b9d4912f378.1719992715.git.tanggeliang@kylinos.cn Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 92ecbb3 ] When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've noticed the following: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4 index 0 is out of range for type 'struct ieee80211_channel *[]' CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1 Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...> Call Trace: <TASK> dump_stack_lvl+0x2d/0x90 __ubsan_handle_out_of_bounds+0xe7/0x140 ? timerqueue_add+0x98/0xb0 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211] ? __kmalloc+0xe1/0x470 __ieee80211_start_scan+0x541/0x760 [mac80211] rdev_scan+0x1f/0xe0 [cfg80211] nl80211_trigger_scan+0x9b6/0xae0 [cfg80211] ...<the rest is not too useful...> Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels' uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't be checked in 'ieee80211_prep_hw_scan()'. Although an initialization of 'hw_scan_req->req.n_channels' introduces some confusion around allocated vs. used VLA members, this shouldn't be a problem since everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'. Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the convenient 'struct_size()' as well. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru [improve (imho) indentation a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a986fa5 ] Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Closes: https://lore.kernel.org/all/20240610024437.GA1464458@ZenIV/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240614122910.3499489-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1a14150 ] Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 starfive-tech#85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object. Co-developed-by: Vishal Chourasia <vishalc@linux.ibm.com> Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com> Signed-off-by: Anjali K <anjalik@linux.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240614173844.746818-1-anjalik@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f1a8f40 upstream. This fixes the following deadlock introduced by 39a92a55be13 ("bluetooth/l2cap: sync sock recv cb and release") ============================================ WARNING: possible recursive locking detected 6.10.0-rc3-g4029dba6b6f1 #6823 Not tainted -------------------------------------------- kworker/u5:0/35 is trying to acquire lock: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_sock_recv_cb+0x44/0x1e0 but task is already holding lock: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_get_chan_by_scid+0xaf/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&chan->lock#2/1); lock(&chan->lock#2/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u5:0/35: #0: ffff888002b8a940 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x750/0x930 #1: ffff888002c67dd0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x44e/0x930 #2: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_get_chan_by_scid+0xaf/0xd0 To fix the original problem this introduces l2cap_chan_lock at l2cap_conless_channel to ensure that l2cap_sock_recv_cb is called with chan->lock held. Fixes: 89e856e ("bluetooth/l2cap: sync sock recv cb and release") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit be4edd1 ] Syzbot report potential ABBA deadlock as below: loop0: detected capacity change from 0 to 1024 ====================================================== WARNING: possible circular locking dependency detected 6.9.0-syzkaller-10323-g8f6a15f095a6 #0 Not tainted ------------------------------------------------------ syz-executor171/5344 is trying to acquire lock: ffff88807cb980b0 (&tree->tree_lock){+.+.}-{3:3}, at: hfsplus_file_truncate+0x811/0xb50 fs/hfsplus/extents.c:595 but task is already holding lock: ffff88807a930108 (&HFSPLUS_I(inode)->extents_lock){+.+.}-{3:3}, at: hfsplus_file_truncate+0x2da/0xb50 fs/hfsplus/extents.c:576 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&HFSPLUS_I(inode)->extents_lock){+.+.}-{3:3}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 hfsplus_file_extend+0x21b/0x1b70 fs/hfsplus/extents.c:457 hfsplus_bmap_reserve+0x105/0x4e0 fs/hfsplus/btree.c:358 hfsplus_rename_cat+0x1d0/0x1050 fs/hfsplus/catalog.c:456 hfsplus_rename+0x12e/0x1c0 fs/hfsplus/dir.c:552 vfs_rename+0xbdb/0xf00 fs/namei.c:4887 do_renameat2+0xd94/0x13f0 fs/namei.c:5044 __do_sys_rename fs/namei.c:5091 [inline] __se_sys_rename fs/namei.c:5089 [inline] __x64_sys_rename+0x86/0xa0 fs/namei.c:5089 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&tree->tree_lock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 hfsplus_file_truncate+0x811/0xb50 fs/hfsplus/extents.c:595 hfsplus_setattr+0x1ce/0x280 fs/hfsplus/inode.c:265 notify_change+0xb9d/0xe70 fs/attr.c:497 do_truncate+0x220/0x310 fs/open.c:65 handle_truncate fs/namei.c:3308 [inline] do_open fs/namei.c:3654 [inline] path_openat+0x2a3d/0x3280 fs/namei.c:3807 do_filp_open+0x235/0x490 fs/namei.c:3834 do_sys_openat2+0x13e/0x1d0 fs/open.c:1406 do_sys_open fs/open.c:1421 [inline] __do_sys_creat fs/open.c:1497 [inline] __se_sys_creat fs/open.c:1491 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1491 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&HFSPLUS_I(inode)->extents_lock); lock(&tree->tree_lock); lock(&HFSPLUS_I(inode)->extents_lock); lock(&tree->tree_lock); This is a false alarm as tree_lock mutex are different, one is from sbi->cat_tree, and another is from sbi->ext_tree: Thread A Thread B - hfsplus_rename - hfsplus_rename_cat - hfs_find_init - mutext_lock(cat_tree->tree_lock) - hfsplus_setattr - hfsplus_file_truncate - mutex_lock(hip->extents_lock) - hfs_find_init - mutext_lock(ext_tree->tree_lock) - hfs_bmap_reserve - hfsplus_file_extend - mutex_lock(hip->extents_lock) So, let's call mutex_lock_nested for tree_lock mutex lock, and pass correct lock class for it. Fixes: 31651c6 ("hfsplus: avoid deadlock on file truncation") Reported-by: syzbot+6030b3b1b9bf70e538c4@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-fsdevel/000000000000e37a4005ef129563@google.com Cc: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20240607142304.455441-1-chao@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b4a3a89 ] The library supports aggregation of objects into other objects only if the parent object does not have a parent itself. That is, nesting is not supported. Aggregation happens in two cases: Without and with hints, where hints are a pre-computed recommendation on how to aggregate the provided objects. Nesting is not possible in the first case due to a check that prevents it, but in the second case there is no check because the assumption is that nesting cannot happen when creating objects based on hints. The violation of this assumption leads to various warnings and eventually to a general protection fault [1]. Before fixing the root cause, error out when nesting happens and warn. [1] general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb starfive-tech#7 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 9069a38 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Reported-by: Alexander Zubkov <green@qrator.net> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

…_TYPE_EXT [ Upstream commit f7866c3 ] When loading a EXT program without specifying `attr->attach_prog_fd`, the `prog->aux->dst_prog` will be null. At this time, calling resolve_prog_type() anywhere will result in a null pointer dereference. Example stack trace: [ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 8.108262] Mem abort info: [ 8.108384] ESR = 0x0000000096000004 [ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits [ 8.108722] SET = 0, FnV = 0 [ 8.108827] EA = 0, S1PTW = 0 [ 8.108939] FSC = 0x04: level 0 translation fault [ 8.109102] Data abort info: [ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000 [ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000 [ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 8.112783] Modules linked in: [ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1 [ 8.113230] Hardware name: linux,dummy-virt (DT) [ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0 [ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8 [ 8.113798] sp : ffff80008283b9f0 [ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001 [ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000 [ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000 [ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff [ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4 [ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f [ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c [ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000 [ 8.114126] Call trace: [ 8.114159] may_access_direct_pkt_data+0x24/0xa0 [ 8.114202] bpf_check+0x3bc/0x28c0 [ 8.114214] bpf_prog_load+0x658/0xa58 [ 8.114227] __sys_bpf+0xc50/0x2250 [ 8.114240] __arm64_sys_bpf+0x28/0x40 [ 8.114254] invoke_syscall.constprop.0+0x54/0xf0 [ 8.114273] do_el0_svc+0x4c/0xd8 [ 8.114289] el0_svc+0x3c/0x140 [ 8.114305] el0t_64_sync_handler+0x134/0x150 [ 8.114331] el0t_64_sync+0x168/0x170 [ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403) [ 8.118672] ---[ end trace 0000000000000000 ]--- One way to fix it is by forcing `attach_prog_fd` non-empty when bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type` API broken which use verifier log to probe prog type and will log nothing if we reject invalid EXT prog before bpf_check(). Another way is by adding null check in resolve_prog_type(). The issue was introduced by commit 4a9c7bb ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows the logic below: prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type; It implies that when EXT program is not yet attached to `dst_prog`, the prog type should be EXT itself. This code worked fine in the past. So just keep using it. Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog` is not present in resolve_prog_type(). Fixes: 4a9c7bb ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20240711145819.254178-2-wutengda@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 01a0a6c ] There's two problems with shared RCGs. The first problem is that they incorrectly report the parent after commit 703db1f ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs"). That's because the cached CFG register value needs to be populated when the clk is registered. clk_rcg2_shared_enable() writes the cached CFG register value 'parked_cfg'. This value is initially zero due to static initializers. If a driver calls clk_enable() before setting a rate or parent, it will set the parent to '0' which is (almost?) always XO, and may not reflect the parent at registration. In the worst case, this switches the RCG from sourcing a fast PLL to the slow crystal speed. The second problem is that the force enable bit isn't cleared. The force enable bit is only used during parking and unparking of shared RCGs. Otherwise it shouldn't be set because it keeps the RCG enabled even when all the branches on the output of the RCG are disabled (the hardware has a feedback mechanism so that any child branches keep the RCG enabled when the branch enable bit is set). This problem wastes power if the clk is unused, and is harmful in the case that the clk framework disables the parent of the force enabled RCG. In the latter case, the GDSC the shared RCG is associated with will get wedged if the RCG's source clk is disabled and the GDSC tries to enable the RCG to do "housekeeping" while powering on. Both of these problems combined with incorrect runtime PM usage in the display driver lead to a black screen on Qualcomm sc7180 Trogdor chromebooks. What happens is that the bootloader leaves the 'disp_cc_mdss_rot_clk' enabled and the 'disp_cc_mdss_rot_clk_src' force enabled and parented to 'disp_cc_pll0'. The mdss driver probes and runtime suspends, disabling the mdss_gdsc which uses the 'disp_cc_mdss_rot_clk_src' for "housekeeping". The 'disp_cc_mdss_rot_clk' is disabled during late init because the clk is unused, but the parent 'disp_cc_mdss_rot_clk_src' is still force enabled because the force enable bit was never cleared. Then 'disp_cc_pll0' is disabled because it is also unused. That's because the clk framework believes the parent of the RCG is XO when it isn't. A child device of the mdss device (e.g. DSI) runtime resumes mdss which powers on the mdss_gdsc. This wedges the GDSC because 'disp_cc_mdss_rot_clk_src' is parented to 'disp_cc_pll0' and that PLL is off. With the GDSC wedged, mdss_runtime_resume() tries to enable 'disp_cc_mdss_mdp_clk' but it can't because the GDSC has wedged all the clks associated with the GDSC causing clks to stay stuck off. This leads to the following warning seen at boot and a black screen because the display driver fails to probe. disp_cc_mdss_mdp_clk status stuck at 'off' WARNING: CPU: 1 PID: 81 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x114/0x168 Modules linked in: CPU: 1 PID: 81 Comm: kworker/u16:4 Not tainted 6.7.0-g0dd3ee311255 #1 f5757d475795053fd2ad52247a070cd50dd046f2 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : clk_branch_toggle+0x114/0x168 lr : clk_branch_toggle+0x110/0x168 sp : ffffffc08084b670 pmr_save: 00000060 x29: ffffffc08084b680 x28: ffffff808006de00 x27: 0000000000000001 x26: ffffff8080dbd4f4 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000000 x22: ffffffd838461198 x21: ffffffd838007997 x20: ffffffd837541d5c x19: 0000000000000001 x18: 0000000000000004 x17: 0000000000000000 x16: 0000000000000010 x15: ffffffd837070fac x14: 0000000000000003 x13: 0000000000000004 x12: 0000000000000001 x11: c0000000ffffdfff x10: ffffffd838347aa0 x9 : 08dadf92e516c000 x8 : 08dadf92e516c000 x7 : 0000000000000000 x6 : 0000000000000027 x5 : ffffffd8385a61f2 x4 : 0000000000000000 x3 : ffffffc08084b398 x2 : ffffffc08084b3a0 x1 : 00000000ffffdfff x0 : 00000000fffffff0 Call trace: clk_branch_toggle+0x114/0x168 clk_branch2_enable+0x24/0x30 clk_core_enable+0x5c/0x1c8 clk_enable+0x38/0x58 clk_bulk_enable+0x40/0xb0 mdss_runtime_resume+0x68/0x258 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0x124/0x214 __rpm_callback+0x7c/0x15c rpm_callback+0x30/0x88 rpm_resume+0x390/0x4d8 rpm_resume+0x43c/0x4d8 __pm_runtime_resume+0x54/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x48/0xa4 device_add+0x52c/0x6fc mipi_dsi_device_register_full+0x104/0x1a8 devm_mipi_dsi_device_register_full+0x28/0x78 ti_sn_bridge_probe+0x1dc/0x2bc auxiliary_bus_probe+0x4c/0x94 really_probe+0xf8/0x270 __driver_probe_device+0xa8/0x130 driver_probe_device+0x44/0x104 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x94/0xe8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x48/0xa4 deferred_probe_work_func+0x9c/0xd8 Fix these problems by parking shared RCGs at boot. This will properly initialize the parked_cfg struct member so that the parent is reported properly and ensure that the clk won't get stuck on or off because the RCG is parented to the safe source (XO). Fixes: 703db1f ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs") Reported-by: Stephen Boyd <sboyd@kernel.org> Closes: https://lore.kernel.org/r/1290a5a0f7f584fcce722eeb2a1fd898.sboyd@kernel.org Closes: https://issuetracker.google.com/319956935 Reported-by: Laura Nao <laura.nao@collabora.com> Closes: https://lore.kernel.org/r/20231218091806.7155-1-laura.nao@collabora.com Cc: Bjorn Andersson <andersson@kernel.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240502224703.103150-1-swboyd@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 667574e upstream. When tries to demote 1G hugetlb folios, a lockdep warning is observed: ============================================ WARNING: possible recursive locking detected 6.10.0-rc6-00452-ga4d0275fa660-dirty starfive-tech#79 Not tainted -------------------------------------------- bash/710 is trying to acquire lock: ffffffff8f0a7850 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0x244/0x460 but task is already holding lock: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&h->resize_lock); lock(&h->resize_lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by bash/710: #0: ffff8f118439c3f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0 #1: ffff8f11893b9e88 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0 #2: ffff8f1183dc4428 (kn->active#98){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0 starfive-tech#3: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460 stack backtrace: CPU: 3 PID: 710 Comm: bash Not tainted 6.10.0-rc6-00452-ga4d0275fa660-dirty starfive-tech#79 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 __lock_acquire+0x10f2/0x1ca0 lock_acquire+0xbe/0x2d0 __mutex_lock+0x6d/0x400 demote_store+0x244/0x460 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa61db14887 RSP: 002b:00007ffc56c48358 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fa61db14887 RDX: 0000000000000002 RSI: 000055a030050220 RDI: 0000000000000001 RBP: 000055a030050220 R08: 00007fa61dbd1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 00007fa61dc1b780 R14: 00007fa61dc17600 R15: 00007fa61dc16a00 </TASK> Lockdep considers this an AA deadlock because the different resize_lock mutexes reside in the same lockdep class, but this is a false positive. Place them in distinct classes to avoid these warnings. Link: https://lkml.kernel.org/r/20240712031314.2570452-1-linmiaohe@huawei.com Fixes: 8531fc6 ("hugetlb: add hugetlb demote page support") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 50ea741 upstream. Syzbot reports a issue as follows: ============================================ BUG: unable to handle page fault for address: ffffed11022e24fe PGD 23ffee067 P4D 23ffee067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 5079 Comm: syz-executor306 Not tainted 6.10.0-rc5-g55027e689933 #0 Call Trace: <TASK> make_indexed_dir+0xdaf/0x13c0 fs/ext4/namei.c:2341 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2451 ext4_rename fs/ext4/namei.c:3936 [inline] ext4_rename2+0x26e5/0x4370 fs/ext4/namei.c:4214 [...] ============================================ The immediate cause of this problem is that there is only one valid dentry for the block to be split during do_split, so split==0 results in out of bounds accesses to the map triggering the issue. do_split unsigned split dx_make_map count = 1 split = count/2 = 0; continued = hash2 == map[split - 1].hash; ---> map[4294967295] The maximum length of a filename is 255 and the minimum block size is 1024, so it is always guaranteed that the number of entries is greater than or equal to 2 when do_split() is called. But syzbot's crafted image has no dot and dotdot in dir, and the dentry distribution in dirblock is as follows: bus dentry1 hole dentry2 free |xx--|xx-------------|...............|xx-------------|...............| 0 12 (8+248)=256 268 256 524 (8+256)=264 788 236 1024 So when renaming dentry1 increases its name_len length by 1, neither hole nor free is sufficient to hold the new dentry, and make_indexed_dir() is called. In make_indexed_dir() it is assumed that the first two entries of the dirblock must be dot and dotdot, so bus and dentry1 are left in dx_root because they are treated as dot and dotdot, and only dentry2 is moved to the new leaf block. That's why count is equal to 1. Therefore add the ext4_check_dx_root() helper function to add more sanity checks to dot and dotdot before starting the conversion to avoid the above issue. Reported-by: syzbot+ae688d469e36fb5138d0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0 Fixes: ac27a0e ("[PATCH] ext4: initial copy of files from ext3") Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240702132349.2600605-2-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4c29ab8 upstream. Fix warning at drivers/pci/msi/msi.h:121. Recently, I added a PCI to PCIe bridge adaptor and a PCIe NVME card to my rp3440. Then, I noticed this warning at boot: WARNING: CPU: 0 PID: 10 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x68/0x90 CPU: 0 PID: 10 Comm: kworker/u32:0 Not tainted 6.9.7-parisc64 #1 Debian 6.9.7-1 Hardware name: 9000/800/rp3440 Workqueue: async async_run_entry_fn We need to select PCI_MSI_ARCH_FALLBACKS when PCI_MSI is selected. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 76f480d upstream. During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: <TASK> qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 </TASK> Send out async logout explicitly for all the ports during vport delete. Cc: stable@vger.kernel.org Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fce09ea ] The panic below is observed when receiving ICMP packets with secmark set while an ICMP raw socket is being created. SK_CTX(sk)->label is updated in apparmor_socket_post_create(), but the packet is delivered to the socket before that, causing the null pointer dereference. Drop the packet if label context is not set. BUG: kernel NULL pointer dereference, address: 000000000000004c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020 RIP: 0010:aa_label_next_confined+0xb/0x40 Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2 RSP: 0018:ffffa92940003b08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002 R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? aa_label_next_confined+0xb/0x40 apparmor_secmark_check+0xec/0x330 security_sock_rcv_skb+0x35/0x50 sk_filter_trim_cap+0x47/0x250 sock_queue_rcv_skb_reason+0x20/0x60 raw_rcv+0x13c/0x210 raw_local_deliver+0x1f3/0x250 ip_protocol_deliver_rcu+0x4f/0x2f0 ip_local_deliver_finish+0x76/0xa0 __netif_receive_skb_one_core+0x89/0xa0 netif_receive_skb+0x119/0x170 ? __netdev_alloc_skb+0x3d/0x140 vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] __napi_poll+0x28/0x1b0 net_rx_action+0x2a4/0x380 __do_softirq+0xd1/0x2c8 __irq_exit_rcu+0xbb/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 RIP: 0010:apparmor_socket_post_create+0xb/0x200 Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48 RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286 RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003 R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748 ? __pfx_apparmor_socket_post_create+0x10/0x10 security_socket_post_create+0x4b/0x80 __sock_create+0x176/0x1f0 __sys_socket+0x89/0x100 __x64_sys_socket+0x17/0x20 do_syscall_64+0x5d/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: ab9f211 ("apparmor: Allow filtering based on secmark policy") Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

changhuangliang and others added 30 commits January 7, 2024 18:53

riscv: dts: starfive: jh7110: Add vin device node

b841567

Add vin device node. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

riscv: configs: Enable vin

a13892f

Enable vin. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

riscv: dts: starfive: add HiFi4 device

9bce8bd

Add the HiFi4/XRP node for the Starfive JH7110 SoC. Signed-off-by: carter.li <carter.li@starfivetech.com>

drivers: pci: Add PLDA PCIe host controller driver for JH7110.

0683f74

This commit combines all patches about the host driver from JH7110_515_SDK_v5.1.3. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

dts: starfive: Add PCIe 0 & PCIe 1 dts nodes.

8dc38fe

PCIe 1 is enabled and PCIe 0 is disabled by default, that is the same as linux 5.1x. Besides, add jh7110-evb-pcie-i2s-sd.dts with pcie/usb/i2c/uart nodes. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

riscv: configs: Add PCIe drivers config.

bffb00d

1. Add PLDA PCIe host controller support. 2. Add NVMe support. 3. Add cfg80211/mac80211 & iwlwifi support.(For AX210) 4. Cancel module config for DRM_NOUVEAU. (GT710...) Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

drivers: nvme: Add precheck and delay for CQE pending status.

cf080ff

To workaroud the NVMe I/O timeout problem in bootup S10udev case which caused by the CQE update lantancy. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>

media: starfive: Update video pipeline set fmt

abcc538

Update video pipeline set fmt. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

media: starfive: Update csi pix cfg

49978de

Update csi pix cfg. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>

ASoC: starfive: Add JH7110 PWMDAC drivers

88cbf62

Add PWMDAC drivers of StarFive JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

riscv: dts: starfive: Add PWMDAC and sound-card-3 nodes

2cec051

Add PWMDAC node in JH7110 DTS. Add new codecs file about PWMDAC codec and sound-card-3 nodes. Add new dts file about PWMDAC for JH7110 EVB. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

riscv: config: Enable PWMDAC in starfive_jh7110_defconfig

ba32d25

Enable PWMDAC module in starfive_jh7110_defconfig Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

ASoC: starfive: Add SPDIF and PCM driver

6d4da46

Add SPDIF and SPDIF-PCM driver for StarFive JH7110. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

riscv: dts: starfive: Add SPDIF and sound-card-4 nodes

98575dd

Add SPDIF node and drop the SPDIF codec node in JH7110 DTS. Add new codecs file about SPDIF codec and sound-card-4 nodes. Add new dts file about SPDIF for JH7110 EVB. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

riscv: config: Enable SPDIF in starfive_jh7110_defconfig

85edcf7

Enable SPDIF and SPDIF Codec in starfive_jh7110_defconfig Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

dt-bindings: display: Add yamls for JH7110 display system and hdmi

ca673a0

StarFive SoCs like the jh7110 use display system based on verisilicon IP, use hdmi base on innosilicon IP. Add bindings for them. Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

vout: starfive: Add driver for the StarFive JH7110 display subsystem

4577453

Add driver for the StarFive JH7110 display subsystem Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

riscv: dts: starfive: jh7110: Add vout dts node

f7b7e27

Add vout dts node to support JH7110 display function Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

riscv:linux:vout:dc8200

0b1f1d1

replace the condition to avoid kernel panic Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>

riscv: configs: starfive: jh7110: Add vout deconfig

2cb72e2

Add vout deconfig Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>

dt-bindings: crypto: Add StarFive crypto module

335be7a

Add documentation to describe StarFive cryptographic engine. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

crypto: starfive - Add crypto engine support

2121946

Adding device probe and DMA init for StarFive cryptographic module. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

riscv: dts: starfive: Add crypto and DMA node

f61fe4a

Add StarFive cryptographic module and dedicated DMA controller node to JH7110 SoCs. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

defconfig: sec: enbale encryption module

898461e

enbale encryption module Signed-off-by: William Qiu <william.qiu@starfivetech.com>

crypto: AF_ALG -- add setpubkey setsockopt call

5502722

For supporting asymmetric ciphers, user space must be able to set the public key. The patch adds a new setsockopt call for setting the public key. Signed-off-by: Stephan Mueller <smueller@chronox.de>

dt-bindings: CAN: Add StarFive CAN module

47200c5

Add documentation to describe StarFive CAN engine. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

CAN: starfive - Add CAN engine support

a2c3ad2

Adding device probe StarFive CAN module. Signed-off-by: William Qiu <william.qiu@starfivetech.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[config] Enable AXP15060 regulator #1

[config] Enable AXP15060 regulator #1

Manorhos commented Jan 11, 2024

[config] Enable AXP15060 regulator #1

[config] Enable AXP15060 regulator #1

Conversation

Manorhos commented Jan 11, 2024