DTUConnect

This script is made to make it easier to connect to the university WiFi and is meant as a help to new students running Linux. This short setup will allow students to setup both a connection to DTUsecure and eduroam at the same time. The script can be run from anywhere and you don't need to be in the proximity of a DTUsecure/eduroam access point. The next time you come within range it will try to connect.

As when you normally connect to DTUsecure/eduroam your username is your studentmail @dtu.dk and the same password as normally used for that account. If you for some reason type anything wrong and finished the script. Just re-run it. It will prompt you to delete your old configuration file.

How to use

Download and open the project by running the following command in the terminal:

git clone https://github.com/MikaelFangel/DTUConnect.git && cd DTUConnect 

Next make sure that setup.sh is executable:

chmod +x ./setup.sh

Last but not least run the script (be aware that on some systems you may need to be super user to complete the configuration):

./setup.sh

Run flake

nix run github:MikaelFangel/DTUconnect

Usage as a flake

Add DTUConnect to your flake.nix:

{
  inputs.DTUConnect.url = "https://flakehub.com/f/MikaelFangel/DTUConnect/*.tar.gz";

  outputs = { self, DTUConnect }: {
    # Use in your outputs
  };
}

Requirements

• NetworkManager or iwd
• Awk