Skip to content

Commit

Permalink
tree wide: fix typos in comments found by codespell
Browse files Browse the repository at this point in the history 
This will not change generated binaries, only the Doxygen output and
source code will have less typos.
  • Loading branch information
@maribu
maribu committed May 2, 2023
1 parent 7213c0a commit c3500eb
Show file tree
Hide file tree
Showing 24 changed files with 31 additions and 31 deletions.
2 changes: 1 addition & 1 deletion boards/e180-zg120b-tb/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -40,7 +40,7 @@ peripherals, different energy modes and short wake-up times.
| HWCRYPTO | — | — | | AES128/AES256, SHA1, SHA256 |
| RTT | — | RTCC | | 1 Hz interval. Either RTT or RTC (see below) |
| RTC | — | RTCC | | 1 Hz interval. Either RTC or RTT (see below) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| | 1 | LETIMER0 | | |
| UART | 0 | USART0 | RX: PA1, TX: PA0 | Default STDIO output |

Expand Down
2 changes: 1 addition & 1 deletion boards/ikea-tradfri/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -65,7 +65,7 @@ Pin 1 is on the top-left side with only 6 contacts.
| RTT | — | RTCC | | 1 Hz interval. Either RTT or RTC (see below) |
| RTC | — | RTCC | | 1 Hz interval. Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PD15, MISO: PD14, CLK: PD13 | |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| | 1 | LETIMER0 | | |
| UART | 0 | USART0 | RX: PB15, TX: PB14 | Default STDIO output |
| | 1 | LEUART0 | RX: PB15, TX: PB14 | Baud rate limited (see below) |
Expand Down
2 changes: 1 addition & 1 deletion boards/slstk3400a/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -67,7 +67,7 @@ PIN 1 is the bottom-left contact when the header faces you horizontally.
| RTT | — | RTCC | | 1 Hz interval. Either RTT or RTC (see below) |
| RTC | — | RTCC | | 1 Hz interval. Either RTC or RTT (see below) |
| SPI | 0 | USART0 | MOSI: PE10, MISO: PE11, CLK: PE12 | |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| UART | 0 | USART1 | RX: PA0, TX: PF2 | Default STDIO output |
| | 1 | LEUART0 | RX: PD5, TX: PD4 | Baud rate limited (see below) |

Expand Down
2 changes: 1 addition & 1 deletion boards/slstk3401a/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -67,7 +67,7 @@ PIN 1 is the bottom-left contact when the header faces you horizontally.
| RTT | — | RTCC | | 1 Hz interval. Either RTT or RTC (see below) |
| RTC | — | RTCC | | 1 Hz interval. Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PC6, MISO: PC7, CLK: PC8 | |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| | 1 | LETIMER0 | | |
| UART | 0 | USART0 | RX: PA1, TX: PA0 | Default STDIO output |
| | 1 | LEUART0 | RX: PD11, TX: PD10 | Baud rate limited (see below) |
Expand Down
4 changes: 2 additions & 2 deletions boards/slstk3402a/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -68,8 +68,8 @@ PIN 1 is the bottom-left contact when the header faces you horizontally.
| RTT | — | RTCC | | 1 Hz interval. Either RTT or RTC (see below) |
| RTC | — | RTCC | | 1 Hz interval. Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PC6, MISO: PC7, CLK: PC8 | |
| Timer | 0 | WTIMER0 + WTIMER1 | | WTIMER0 is used as prescaler (must be adjecent) |
| Timer | 1 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | WTIMER0 + WTIMER1 | | WTIMER0 is used as prescaler (must be adjacent) |
| Timer | 1 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| | 2 | LETIMER0 | | |
| UART | 0 | USART0 | RX: PA1, TX: PA0 | Default STDIO output |
| | 1 | LEUART0 | RX: PD11, TX: PD10 | Baud rate limited (see below) |
Expand Down
2 changes: 1 addition & 1 deletion boards/sltb001a/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -65,7 +65,7 @@ is the top-left contact, marked on the silkscreen.
| RTT | — | RTCC | | 1 Hz interval. Either RTT or RTC (see below) |
| RTC | — | RTCC | | 1 Hz interval. Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PC6, MISO: PC7, CLK: PC8 | |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| | 1 | LETIMER0 | | |
| UART | 0 | USART0 | RX: PA1, TX: PA0 | Default STDIO output |
| | 1 | LEUART0 | RX: PD11, TX: PD10 | Baud rate limited (see below) |
Expand Down
2 changes: 1 addition & 1 deletion boards/slwstk6220a/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -69,7 +69,7 @@ PIN 1 is the bottom-left contact when the header faces you horizontally.
| RTT | — | RTC | | Either RTT or RTC (see below) |
| RTC | — | RTC | | Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PD0, MISO: PD1, CLK: PD2 | |
| Timer | 0 | TIMER1 + TIMER2 | | TIMER1 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER1 + TIMER2 | | TIMER1 is used as prescaler (must be adjacent) |
| | 1 | LETIMER0 | | |
| UART | 0 | UART0 | RX: PE1, TX: PE0 | STDIO output |
| | 1 | LEUART0 | RX: PD5, TX: PD4 | Baud rate limited (see below) |
Expand Down
2 changes: 1 addition & 1 deletion boards/stk3200/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -67,7 +67,7 @@ PIN 1 is the bottom-left contact when the header faces you horizontally.
| RTT | — | RTC | | Either RTT or RTC (see below) |
| RTC | — | RTC | | Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PD7, MISO: PD6, CLK: PC15 | |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| UART | 0 | LEUART0 | RX: PD5, TX: PD4 | STDIO Output, Baud rate limited (see below) |

### User interface
Expand Down
2 changes: 1 addition & 1 deletion boards/stk3600/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -71,7 +71,7 @@ PIN 1 is the bottom-left contact when the header faces you horizontally.
| RTC | — | RTC | | Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PD0, MISO: PD1, CLK: PD2 | |
| | 1 | USART2 | MOSI: NC, MISO: PC3, CLK: PC4 | |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| | 1 | LETIMER0 | | |
| UART | 0 | UART0 | RX: PE1, TX: PE0 | STDIO output |
| | 1 | LEUART0 | RX: PD5, TX: PD4 | Baud rate limited (see below) |
Expand Down
2 changes: 1 addition & 1 deletion boards/stk3700/doc.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -71,7 +71,7 @@ PIN 1 is the bottom-left contact when the header faces you horizontally.
| RTC | — | RTC | | Either RTC or RTT (see below) |
| SPI | 0 | USART1 | MOSI: PD0, MISO: PD1, CLK: PD2 | |
| | 1 | USART2 | MOSI: NC, MISO: PC3, CLK: PC4 | |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjecent) |
| Timer | 0 | TIMER0 + TIMER1 | | TIMER0 is used as prescaler (must be adjacent) |
| | 1 | LETIMER0 | | |
| UART | 0 | UART0 | RX: PE1, TX: PE0 | STDIO output |
| | 1 | LEUART0 | RX: PD5, TX: PD4 | Baud rate limited (see below) |
Expand Down
2 changes: 1 addition & 1 deletion cpu/gd32v/periph/i2c.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -362,7 +362,7 @@ int _i2c_read_cmd(i2c_t dev, uint8_t *data)
switch (_i2c_dev[dev].state) {
case I2C_RXB_NOT_EMPTY_BT_COMPLETE:
case I2C_RXB_NOT_EMPTY:
/* RBNE is cleared by reding STAT0 followed by reading the data register */
/* RBNE is cleared by reading STAT0 followed by reading the data register */
i2c->STAT0;
*data = i2c->DATA;
return 0;
Expand Down
2 changes: 1 addition & 1 deletion cpu/native/async_read.c
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
/**
* Multiple asynchronus read on file descriptors
* Multiple asynchronous read on file descriptors
*
* Copyright (C) 2015 Ludwig Knüpfer <ludwig.knuepfer@fu-berlin.de>,
* Martine Lenders <mlenders@inf.fu-berlin.de>
Expand Down
8 changes: 4 additions & 4 deletions cpu/native/include/async_read.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,7 +11,7 @@
* @{
*
* @file
* @brief Multiple asynchronus read on file descriptors
* @brief Multiple asynchronous read on file descriptors
*
* @author Takuo Yonezawa <Yonezawa-T2@mail.dnp.co.jp>
*/
Expand All @@ -33,7 +33,7 @@ extern "C" {
#endif

/**
* @brief asynchronus read callback type
* @brief asynchronous read callback type
*/
typedef void (*native_async_read_callback_t)(int fd, void *arg);

Expand All @@ -48,14 +48,14 @@ typedef struct {
} async_read_t;

/**
* @brief initialize asynchronus read system
* @brief initialize asynchronous read system
*
* This registers SIGIO signal handler.
*/
void native_async_read_setup(void);

/**
* @brief shutdown asynchronus read system
* @brief shutdown asynchronous read system
*
* This deregisters SIGIO signal handler.
*/
Expand Down
4 changes: 2 additions & 2 deletions cpu/nrf52/include/periph_cpu.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -246,7 +246,7 @@ typedef struct {
typedef void (*spi_twi_irq_cb_t)(void *arg);

/**
* @brief Reqister a SPI IRQ handler for a shared I2C/SPI irq vector
* @brief Register a SPI IRQ handler for a shared I2C/SPI irq vector
*
* @param bus bus to register the IRQ handler on
* @param cb callback to call on IRQ
Expand All @@ -256,7 +256,7 @@ void spi_twi_irq_register_spi(NRF_SPIM_Type *bus,
spi_twi_irq_cb_t cb, void *arg);

/**
* @brief Reqister a I2C IRQ handler for a shared I2C/SPI irq vector
* @brief Register a I2C IRQ handler for a shared I2C/SPI irq vector
*
* @param bus bus to register the IRQ handler on
* @param cb callback to call on IRQ
Expand Down
4 changes: 2 additions & 2 deletions cpu/nrf9160/include/periph_cpu.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -190,7 +190,7 @@ typedef enum {
typedef void (*spi_twi_irq_cb_t)(void *arg);

/**
* @brief Reqister a SPI IRQ handler for a shared I2C/SPI irq vector
* @brief Register a SPI IRQ handler for a shared I2C/SPI irq vector
*
* @param bus bus to register the IRQ handler on
* @param cb callback to call on IRQ
Expand All @@ -200,7 +200,7 @@ void spi_twi_irq_register_spi(NRF_SPIM_Type *bus,
spi_twi_irq_cb_t cb, void *arg);

/**
* @brief Reqister a I2C IRQ handler for a shared I2C/SPI irq vector
* @brief Register a I2C IRQ handler for a shared I2C/SPI irq vector
*
* @param bus bus to register the IRQ handler on
* @param cb callback to call on IRQ
Expand Down
2 changes: 1 addition & 1 deletion drivers/bq2429x/include/bq2429x_internal.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,7 +11,7 @@
*
* @{
* @file
* @brief Internal address, registers, constatns for the BQ2429x family
* @brief Internal address, registers, constants for the BQ2429x family
* power ICs.
*
* @author Jean Pierre Dudey <jeandudey@hotmail.com>
Expand Down
2 changes: 1 addition & 1 deletion drivers/cc110x/cc110x_rx_tx.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -316,7 +316,7 @@ void cc110x_isr(netdev_t *netdev)
gpio_irq_enable(dev->params.gdo0);
gpio_irq_enable(dev->params.gdo2);
cc110x_release(dev);
/* Pass event to uper layer, if needed */
/* Pass event to upper layer, if needed */
if (post_isr_event != NETDEV_NO_EVENT) {
dev->netdev.event_callback(&dev->netdev, post_isr_event);
}
Expand Down
2 changes: 1 addition & 1 deletion drivers/cc110x/include/cc110x_params.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -49,7 +49,7 @@ extern "C" {
#endif

#ifndef CC110X_PARAM_SPI_CLOCK
#define CC110X_PARAM_SPI_CLOCK SPI_CLK_5MHZ /**< SPI clock frequence to use */
#define CC110X_PARAM_SPI_CLOCK SPI_CLK_5MHZ /**< SPI clock frequency to use */
#endif

#ifndef CC110X_PARAM_PATABLE
Expand Down
4 changes: 2 additions & 2 deletions drivers/include/nrf24l01p_ng.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -281,7 +281,7 @@ uint8_t nrf24l01p_ng_get_crc(const nrf24l01p_ng_t *dev,
*
* @retval 0 Success
* @retval -EINVAL Bad Tx power configuration value
* @retval -EAGAIN Current state does not permit changin Tx power
* @retval -EAGAIN Current state does not permit changing Tx power
*/
int nrf24l01p_ng_set_tx_power(nrf24l01p_ng_t *dev,
nrf24l01p_ng_tx_power_t power);
Expand Down Expand Up @@ -333,7 +333,7 @@ uint8_t nrf24l01p_ng_get_channel(const nrf24l01p_ng_t *dev);
*
* @retval 0 Success
* @retval -EINVAL Bad address length
* @return -EAGAIN Current state does not permit changin Rx address
* @return -EAGAIN Current state does not permit changing Rx address
*/
int nrf24l01p_ng_set_rx_address(nrf24l01p_ng_t *dev, const uint8_t *addr,
nrf24l01p_ng_pipe_t pipe);
Expand Down
2 changes: 1 addition & 1 deletion drivers/netdev/ieee802154.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -201,7 +201,7 @@ int netdev_ieee802154_set(netdev_ieee802154_t *dev, netopt_t opt, const void *va
uint16_t chan = *((uint16_t *)value);
/* real validity needs to be checked by device, since sub-GHz and
* 2.4 GHz band radios have different legal values. Here we only
* check that it fits in an 8-bit variabl*/
* check that it fits in an 8-bit variable */
assert(chan <= UINT8_MAX);
dev->chan = chan;
res = sizeof(uint16_t);
Expand Down
2 changes: 1 addition & 1 deletion drivers/soft_uart/soft_uart.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@ struct uart_ctx {
void* rx_cb_arg; /**< RX callback arg */
uint32_t bit_time; /**< timer ticks per bit */
uint16_t byte_tx; /**< current TX byte */
uint16_t byte_rx; /**< curretn RX byte */
uint16_t byte_rx; /**< current RX byte */
uint8_t bits_tx; /**< TX bit pos */
uint8_t state_rx; /**< RX state */
#ifdef MODULE_SOFT_UART_MODECFG
Expand Down
2 changes: 1 addition & 1 deletion pkg/openwsn/contrib/openwsn.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,7 @@
/**
* @{
* @file
* @brief OpenWSN bootstraping functions implementation
* @brief OpenWSN bootstrapping functions implementation
*
* @author Peter Kietzmann <peter.kietzmann@haw-hamburg.de>
* @author Francisco Molina <francois-xavier.molina@inria.fr>
Expand Down
2 changes: 1 addition & 1 deletion sys/net/gnrc/routing/ipv6_auto_subnets/gnrc_ipv6_auto_subnets.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -121,7 +121,7 @@
#endif

/**
* @brief How long to wait for other routers annoucements before resending
* @brief How long to wait for other routers announcements before resending
* or creating subnets when the retry counter is exhausted
*/
#ifndef CONFIG_GNRC_IPV6_AUTO_SUBNETS_TIMEOUT_MS
Expand Down
2 changes: 1 addition & 1 deletion tests/driver_nrf24l01p_lowlevel/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -229,7 +229,7 @@ int cmd_send(int argc, char **argv)
}
/* trigger transmitting */
nrf24l01p_transmit(&nrf24l01p_0);
/* wait while data is pysically transmitted */
/* wait while data is physically transmitted */
ztimer_sleep(ZTIMER_USEC, DELAY_DATA_ON_AIR);
/* get status of the transceiver */
status = nrf24l01p_get_status(&nrf24l01p_0);
Expand Down

0 comments on commit c3500eb

Please sign in to comment.