[GraphQL][RFC] Introduce UInt53 scalar (#18552)

## Description

Whilst working on #18337, I noticed that we were over-using the `Int`
scalar -- using it to represent values that could exceed 2^31 - 1 --
when the GraphQL spec states that `Int` must be a 32-bit signed integer.

We made this decision at the time (a) because `async-graphql` allowed
converting `u64`s to `Int` and we were primarily concerned with the fact
that although JSON doesn't specify a precision for its numeric types, JS
(among other languages), assumes it is an IEEE double-precision floating
point number, so can only represent integral values precisely below
2^53.

`cynic` (a Rust GraphQL client library) is (correctly) stricter,
however, and maps an `Int` to an `i32`, always. There may be other
similarly strict client libraries for other languages.

This PR introduces a new scalar, `UInt`, that maps to a JSON number
literal, just like `Int`, but allows us to ascribe our own meaning (in
this case, it will be an unsigned number, and it can be as large as
2^53).

This scalar has been used in many cases where we had previously used
`Int`: sequence numbers, counts of objects, checkpoints, transactions,
etc. While other uses continue to use `Int` (pagination limits, service
limits, values bounded by the number of validators).

In some cases, we have switched from `BigInt` to using this scalar
notably:

- the db cost estimate, which was previously a `BigInt` because we were
unsure of its scale, but in hindsight, after benchmarking, it is
unlikely that we would want to set a limit greater than 2^31 - 1.

- the number of checkpoints in an epoch, as the number of transactions
in an epoch (a number that is guaranteed to be greater) is being
represented using an `Int` at the moment (and soon a `UInt53`).

This will be a breaking change, so will only go out with the new major
version. Hopefully, this change will be minimal as the format of this
scalar over the wire is the same as for `Int`, but it will require
existing clients to register a new scalar in most cases.

## Test plan

Existing tests:

```
sui-graphql-rpc$ cargo nextest run
sui-graphql-e2e-tests$ cargo nextest run --features pg_integration
```

---

## Release notes

Check each box that your changes affect. If none of the boxes relate to
your changes, release notes aren't required.

For each box you select, include information after the relevant heading
that describes the impact of your changes that a user might notice and
any actions they must take to implement updates.

- [ ] Protocol: 
- [ ] Nodes (Validators and Full nodes): 
- [ ] Indexer: 
- [ ] JSON-RPC: 
- [x] GraphQL: Introduces a new scalar -- `UInt53` -- to represent
unsigned 53 bit integer values. Some uses of `Int` in the existing
schema have been replaced with `UInt53`. All clients will need to
register the new scalar and clients for statically typed languages will
also need to use a wider (e.g. 64 bit), unsigned type to hold the value.
- [ ] CLI: 
- [ ] Rust SDK:

crates/sui-graphql-rpc/src/config.rs

@@ -2,7 +2,6 @@
 // SPDX-License-Identifier: Apache-2.0
 
 use crate::functional_group::FunctionalGroup;
-use crate::types::big_int::BigInt;
 use async_graphql::*;
 use fastcrypto_zkp::bn254::zk_login_api::ZkLoginEnv;
 use serde::{Deserialize, Serialize};
@@ -67,23 +66,23 @@ pub struct Limits {
     /// Maximum number of nodes in the requests.
     pub max_query_nodes: u32,
     /// Maximum number of output nodes allowed in the response.
-    pub max_output_nodes: u64,
+    pub max_output_nodes: u32,
     /// Maximum size (in bytes) of a GraphQL request.
     pub max_query_payload_size: u32,
     /// Queries whose EXPLAIN cost are more than this will be logged. Given in the units used by the
     /// database (where 1.0 is roughly the cost of a sequential page access).
-    pub max_db_query_cost: u64,
+    pub max_db_query_cost: u32,
     /// Paginated queries will return this many elements if a page size is not provided.
-    pub default_page_size: u64,
+    pub default_page_size: u32,
     /// Paginated queries can return at most this many elements.
-    pub max_page_size: u64,
+    pub max_page_size: u32,
     /// Time (in milliseconds) to wait for a transaction to be executed and the results returned
     /// from GraphQL. If the transaction takes longer than this time to execute, the request will
     /// return a timeout error, but the transaction may continue executing.
-    pub mutation_timeout_ms: u64,
+    pub mutation_timeout_ms: u32,
     /// Time (in milliseconds) to wait for a read request from the GraphQL service. Requests that
     /// take longer than this time to return a result will return a timeout error.
-    pub request_timeout_ms: u64,
+    pub request_timeout_ms: u32,
     /// Maximum amount of nesting among type arguments (type arguments nest when a type argument is
     /// itself generic and has arguments).
     pub max_type_argument_depth: u32,
@@ -223,36 +222,36 @@ impl ServiceConfig {
     /// with a connection of first: 10 and has a field to a connection with last: 20, the count
     /// at the second level would be 200 nodes. This is then summed to the count of 10 nodes
     /// at the first level, for a total of 210 nodes.
-    pub async fn max_output_nodes(&self) -> u64 {
+    pub async fn max_output_nodes(&self) -> u32 {
         self.limits.max_output_nodes
     }
 
     /// Maximum estimated cost of a database query used to serve a GraphQL request.  This is
     /// measured in the same units that the database uses in EXPLAIN queries.
-    async fn max_db_query_cost(&self) -> BigInt {
-        BigInt::from(self.limits.max_db_query_cost)
+    async fn max_db_query_cost(&self) -> u32 {
+        self.limits.max_db_query_cost
     }
 
     /// Default number of elements allowed on a single page of a connection.
-    async fn default_page_size(&self) -> u64 {
+    async fn default_page_size(&self) -> u32 {
         self.limits.default_page_size
     }
 
     /// Maximum number of elements allowed on a single page of a connection.
-    async fn max_page_size(&self) -> u64 {
+    async fn max_page_size(&self) -> u32 {
         self.limits.max_page_size
     }
 
     /// Maximum time in milliseconds spent waiting for a response from fullnode after issuing a
     /// a transaction to execute. Note that the transaction may still succeed even in the case of a
     /// timeout. Transactions are idempotent, so a transaction that times out should be resubmitted
     /// until the network returns a definite response (success or failure, not timeout).
-    async fn mutation_timeout_ms(&self) -> u64 {
+    async fn mutation_timeout_ms(&self) -> u32 {
         self.limits.mutation_timeout_ms
     }
 
     /// Maximum time in milliseconds that will be spent to serve one query request.
-    async fn request_timeout_ms(&self) -> u64 {
+    async fn request_timeout_ms(&self) -> u32 {
         self.limits.request_timeout_ms
     }
 

crates/sui-graphql-rpc/src/data/pg.rs

@@ -25,7 +25,7 @@ pub(crate) struct PgExecutor {
 }
 
 pub(crate) struct PgConnection<'c> {
-    max_cost: u64,
+    max_cost: u32,
     conn: &'c mut diesel::PgConnection,
 }
 
@@ -147,7 +147,7 @@ mod query_cost {
     }
 
     /// Run `EXPLAIN` on the `query`, and log the estimated cost.
-    pub(crate) fn log<Q>(conn: &mut PgConnection, max_db_query_cost: u64, query: Q)
+    pub(crate) fn log<Q>(conn: &mut PgConnection, max_db_query_cost: u32, query: Q)
     where
         Q: Query + QueryId + QueryFragment<Pg> + RunQueryDsl<PgConnection>,
     {

crates/sui-graphql-rpc/src/error.rs

@@ -70,7 +70,7 @@ pub enum Error {
     #[error("'first' and 'last' must not be used together")]
     CursorNoFirstLast,
     #[error("Connection's page size of {0} exceeds max of {1}")]
-    PageTooLarge(u64, u64),
+    PageTooLarge(u64, u32),
     // Catch-all for client-fault errors
     #[error("{0}")]
     Client(String),

crates/sui-graphql-rpc/src/extensions/query_limits_checker.rs

@@ -31,7 +31,7 @@ pub(crate) struct ShowUsage;
 #[derive(Clone, Debug, Default)]
 struct ValidationRes {
     input_nodes: u32,
-    output_nodes: u64,
+    output_nodes: u32,
     depth: u32,
     num_variables: u32,
     num_fragments: u32,
@@ -73,7 +73,7 @@ impl ExtensionFactory for QueryLimitsChecker {
 #[derive(Debug)]
 struct ComponentCost {
     pub input_nodes: u32,
-    pub output_nodes: u64,
+    pub output_nodes: u32,
     pub depth: u32,
 }
 
@@ -234,7 +234,7 @@ impl QueryLimitsChecker {
         // Use BFS to analyze the query and count the number of nodes and the depth of the query
         struct ToVisit<'s> {
             selection: &'s Positioned<Selection>,
-            parent_node_count: u64,
+            parent_node_count: u32,
         }
 
         // Queue to store the nodes at each level
@@ -431,8 +431,8 @@ fn check_directives(directives: &[Positioned<Directive>]) -> ServerResult<()> {
 fn estimate_output_nodes_for_curr_node(
     f: &Positioned<Field>,
     variables: &Variables,
-    default_page_size: u64,
-) -> u64 {
+    default_page_size: u32,
+) -> u32 {
     if !is_connection(f) {
         1
     } else {
@@ -446,19 +446,19 @@ fn estimate_output_nodes_for_curr_node(
     }
 }
 
-/// Try to extract a u64 value from the given argument, or return None on failure.
-fn extract_limit(value: Option<&Positioned<GqlValue>>, variables: &Variables) -> Option<u64> {
+/// Try to extract a u32 value from the given argument, or return None on failure.
+fn extract_limit(value: Option<&Positioned<GqlValue>>, variables: &Variables) -> Option<u32> {
     if let GqlValue::Variable(var) = &value?.node {
         return match variables.get(var) {
-            Some(Value::Number(num)) => num.as_u64(),
+            Some(Value::Number(num)) => num.as_u64().map(|v| v as u32),
             _ => None,
         };
     }
 
     let GqlValue::Number(value) = &value?.node else {
         return None;
     };
-    value.as_u64()
+    value.as_u64().map(|v| v as u32)
 }
 
 /// Checks if the given field is a connection field by whether it has 'edges' or 'nodes' selected.

crates/sui-graphql-rpc/src/extensions/timeout.rs

@@ -71,9 +71,9 @@ impl Extension for TimeoutExt {
         // increase the timeout if the request is a mutation
         let is_mutation = self.is_mutation.load(Ordering::Relaxed);
         let request_timeout = if is_mutation {
-            Duration::from_millis(cfg.limits.mutation_timeout_ms)
+            Duration::from_millis(cfg.limits.mutation_timeout_ms.into())
         } else {
-            Duration::from_millis(cfg.limits.request_timeout_ms)
+            Duration::from_millis(cfg.limits.request_timeout_ms.into())
         };
 
         timeout(request_timeout, next.run(ctx, operation_name))

crates/sui-graphql-rpc/src/server/builder.rs

@@ -420,7 +420,7 @@ impl ServerBuilder {
             // Bound each statement in a request with the overall request timeout, to bound DB
             // utilisation (in the worst case we will use 2x the request timeout time in DB wall
             // time).
-            config.service.limits.request_timeout_ms,
+            config.service.limits.request_timeout_ms.into(),
         )
         .map_err(|e| Error::Internal(format!("Failed to create pg connection pool: {}", e)))?;
 
@@ -688,7 +688,7 @@ pub mod tests {
         let reader = PgManager::reader_with_config(
             connection_config.db_url.clone(),
             connection_config.db_pool_size,
-            service_config.limits.request_timeout_ms,
+            service_config.limits.request_timeout_ms.into(),
         )
         .expect("Failed to create pg connection pool");
 
@@ -771,8 +771,8 @@ pub mod tests {
             sui_client: &SuiClient,
         ) -> Response {
             let mut cfg = ServiceConfig::default();
-            cfg.limits.request_timeout_ms = timeout.as_millis() as u64;
-            cfg.limits.mutation_timeout_ms = timeout.as_millis() as u64;
+            cfg.limits.request_timeout_ms = timeout.as_millis() as u32;
+            cfg.limits.mutation_timeout_ms = timeout.as_millis() as u32;
 
             let schema = prep_schema(None, Some(cfg))
                 .context_data(Some(sui_client.clone()))

crates/sui-graphql-rpc/src/types/balance.rs

@@ -3,6 +3,7 @@
 
 use super::available_range::AvailableRange;
 use super::cursor::{self, Page, RawPaginated, Target};
+use super::uint53::UInt53;
 use super::{big_int::BigInt, move_type::MoveType, sui_address::SuiAddress};
 use crate::consistency::Checkpointed;
 use crate::data::{Db, DbConnection, QueryExecutor};
@@ -26,7 +27,7 @@ pub(crate) struct Balance {
     /// Coin type for the balance, such as 0x2::sui::SUI
     pub(crate) coin_type: MoveType,
     /// How many coins of this type constitute the balance
-    pub(crate) coin_object_count: Option<u64>,
+    pub(crate) coin_object_count: Option<UInt53>,
     /// Total balance across all coin objects of the coin type
     pub(crate) total_balance: Option<BigInt>,
 }
@@ -174,7 +175,7 @@ impl TryFrom<StoredBalance> for Balance {
             .transpose()
             .map_err(|_| Error::Internal("Failed to read balance.".to_string()))?;
 
-        let coin_object_count = count.map(|c| c as u64);
+        let coin_object_count = count.map(|c| UInt53::from(c as u64));
 
         let coin_type = MoveType::new(
             parse_sui_type_tag(&coin_type)

crates/sui-graphql-rpc/src/types/checkpoint.rs

@@ -11,6 +11,7 @@ use super::{
     epoch::Epoch,
     gas::GasCostSummary,
     transaction_block::{self, TransactionBlock, TransactionBlockFilter},
+    uint53::UInt53,
 };
 use crate::consistency::Checkpointed;
 use crate::{
@@ -32,7 +33,7 @@ use sui_types::messages_checkpoint::CheckpointDigest;
 #[derive(Default, InputObject)]
 pub(crate) struct CheckpointId {
     pub digest: Option<Digest>,
-    pub sequence_number: Option<u64>,
+    pub sequence_number: Option<UInt53>,
 }
 
 /// DataLoader key for fetching a `Checkpoint` by its sequence number, constrained by a consistency
@@ -90,8 +91,8 @@ impl Checkpoint {
 
     /// This checkpoint's position in the total order of finalized checkpoints, agreed upon by
     /// consensus.
-    async fn sequence_number(&self) -> u64 {
-        self.sequence_number_impl()
+    async fn sequence_number(&self) -> UInt53 {
+        self.sequence_number_impl().into()
     }
 
     /// The timestamp at which the checkpoint is agreed to have happened according to consensus.
@@ -115,8 +116,8 @@ impl Checkpoint {
     }
 
     /// The total number of transaction blocks in the network by the end of this checkpoint.
-    async fn network_total_transactions(&self) -> Option<u64> {
-        Some(self.network_total_transactions_impl())
+    async fn network_total_transactions(&self) -> Option<UInt53> {
+        Some(self.network_total_transactions_impl().into())
     }
 
     /// The computation cost, storage cost, storage rebate, and non-refundable storage fee
@@ -157,7 +158,7 @@ impl Checkpoint {
         let Some(filter) = filter
             .unwrap_or_default()
             .intersect(TransactionBlockFilter {
-                at_checkpoint: Some(self.stored.sequence_number as u64),
+                at_checkpoint: Some(UInt53::from(self.stored.sequence_number as u64)),
                 ..Default::default()
             })
         else {
@@ -178,7 +179,7 @@ impl Checkpoint {
 impl CheckpointId {
     pub(crate) fn by_seq_num(seq_num: u64) -> Self {
         CheckpointId {
-            sequence_number: Some(seq_num),
+            sequence_number: Some(seq_num.into()),
             digest: None,
         }
     }
@@ -213,7 +214,7 @@ impl Checkpoint {
             } => {
                 let DataLoader(dl) = ctx.data_unchecked();
                 dl.load_one(SeqNumKey {
-                    sequence_number,
+                    sequence_number: sequence_number.into(),
                     digest,
                     checkpoint_viewed_at,
                 })

crates/sui-graphql-rpc/src/types/coin.rs

@@ -23,6 +23,7 @@ use super::sui_address::SuiAddress;
 use super::suins_registration::{DomainFormat, SuinsRegistration};
 use super::transaction_block::{self, TransactionBlock, TransactionBlockFilter};
 use super::type_filter::ExactTypeFilter;
+use super::uint53::UInt53;
 use async_graphql::*;
 
 use async_graphql::connection::{Connection, CursorType, Edge};
@@ -150,7 +151,7 @@ impl Coin {
             .await
     }
 
-    pub(crate) async fn version(&self) -> u64 {
+    pub(crate) async fn version(&self) -> UInt53 {
         ObjectImpl(&self.super_.super_).version().await
     }
 

crates/sui-graphql-rpc/src/types/coin_metadata.rs

@@ -16,6 +16,7 @@ use super::sui_address::SuiAddress;
 use super::suins_registration::{DomainFormat, SuinsRegistration};
 use super::transaction_block::{self, TransactionBlock, TransactionBlockFilter};
 use super::type_filter::ExactTypeFilter;
+use super::uint53::UInt53;
 use crate::data::Db;
 use crate::error::Error;
 use async_graphql::connection::Connection;
@@ -139,7 +140,7 @@ impl CoinMetadata {
             .await
     }
 
-    pub(crate) async fn version(&self) -> u64 {
+    pub(crate) async fn version(&self) -> UInt53 {
         ObjectImpl(&self.super_.super_).version().await
     }
 

crates/sui-graphql-rpc/src/types/cursor.rs

@@ -140,7 +140,7 @@ impl<C> Page<C> {
             (limit, after, None, before) => Page {
                 after,
                 before,
-                limit: limit.unwrap_or(limits.default_page_size),
+                limit: limit.unwrap_or(limits.default_page_size as u64),
                 end: End::Front,
             },
 
@@ -152,7 +152,7 @@ impl<C> Page<C> {
             },
         };
 
-        if page.limit > limits.max_page_size {
+        if page.limit > limits.max_page_size as u64 {
             return Err(Error::PageTooLarge(page.limit, limits.max_page_size).extend());
         }
 
@@ -797,7 +797,7 @@ mod tests {
     #[test]
     fn test_err_page_too_big() {
         let config = ServiceConfig::default();
-        let too_big = config.limits.max_page_size + 1;
+        let too_big = config.limits.max_page_size as u64 + 1;
         let err = Page::<JsonCursor<u64>>::from_params(&config, Some(too_big), None, None, None)
             .unwrap_err();