Skip to content

Commit

Permalink
boards: arm: bmd_345_eval: Add BMD 345 EVAL Board Support.
Browse files Browse the repository at this point in the history 
Add support for BMD 345 EVAL BSP with PA/LNA support
Fixes: zephyrproject-rtos#31585

Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
  • Loading branch information
NavinSankar Velliangiri committed Feb 22, 2021
1 parent 2919989 commit a60bcdc
Show file tree
Hide file tree
Showing 11 changed files with 636 additions and 0 deletions.
1 change: 1 addition & 0 deletions CODEOWNERS
View file
Validating CODEOWNERS rules …
Original file line number Diff line number Diff line change
Expand Up @@ -79,6 +79,7 @@
/boards/arm/96b_stm32_sensor_mez/ @Mani-Sadhasivam
/boards/arm/96b_wistrio/ @Mani-Sadhasivam
/boards/arm/arduino_due/ @ioannisg
/boards/arm/bmd_345_eval/ @Navin-Sankar
/boards/arm/cc1352r1_launchxl/ @bwitherspoon
/boards/arm/cc26x2r1_launchxl/ @bwitherspoon
/boards/arm/cc3220sf_launchxl/ @vanti
Expand Down
8 changes: 8 additions & 0 deletions boards/arm/bmd_345_eval/Kconfig
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,8 @@
# Copyright (c) 2021 Linumiz
# SPDX-License-Identifier: Apache-2.0

config BOARD_ENABLE_DCDC
bool "Enable DCDC mode"
select SOC_DCDC_NRF52X
default y
depends on BOARD_BMD_345_EVAL
6 changes: 6 additions & 0 deletions boards/arm/bmd_345_eval/Kconfig.board
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,6 @@
# Copyright (c) 2021 Linumiz
# SPDX-License-Identifier: Apache-2.0

config BOARD_BMD_345_EVAL
bool "BMD 345 EVAL"
depends on SOC_NRF52840_QIAA
24 changes: 24 additions & 0 deletions boards/arm/bmd_345_eval/Kconfig.defconfig
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,24 @@
# EVK BMD 345 board configuration

# Copyright (c) 2021 Linumiz
# SPDX-License-Identifier: Apache-2.0

if BOARD_BMD_345_EVAL

config BOARD
default "bmd_345_eval"

if USB

config USB_NRFX
default y

config USB_DEVICE_STACK
default y

endif # USB

config BT_CTLR
default BT

endif # BOARD_BMD_345_EVAL
265 changes: 265 additions & 0 deletions boards/arm/bmd_345_eval/bmd_345_eval.dts
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,265 @@
/*
* Copyright (c) 2021 Linumiz
*
* SPDX-License-Identifier: Apache-2.0
*/

/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>

/ {
model = "Ublox BMD 345 EVAL";
compatible = "Ublox,BMD 345 EVAL";

chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};

leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
label = "User LD0";
};
led1: led_1 {
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
label = "User LD1";
};
led2: led_2 {
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
label = "User LD2";
};
led3: led_3 {
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
label = "User LD3";
};
};

pwmleds {
compatible = "pwm-leds";
pwm_led0: pwm_led_0 {
pwms = <&pwm0 13>;
};
};

gpio_keys {
compatible = "gpio-keys";
button0: button_0 {
gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 0";
};
button1: button_1 {
gpios = <&gpio0 12 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 1";
};
button2: button_2 {
gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 2";
};
button3: button_3 {
gpios = <&gpio0 25 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 3";
};
};

arduino_header: connector {
compatible = "arduino-header-r3";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <0 0 &gpio0 3 0>, /* A0 */
<1 0 &gpio0 4 0>, /* A1 */
<2 0 &gpio0 28 0>, /* A2 */
<3 0 &gpio0 29 0>, /* A3 */
<4 0 &gpio0 30 0>, /* A4 */
<5 0 &gpio0 31 0>, /* A5 */
<6 0 &gpio1 1 0>, /* D0 */
<8 0 &gpio1 3 0>, /* D2 */
<12 0 &gpio1 7 0>, /* D6 */
<13 0 &gpio1 8 0>, /* D7 */
<14 0 &gpio1 10 0>, /* D8 */
<15 0 &gpio1 11 0>, /* D9 */
<16 0 &gpio1 12 0>, /* D10 */
<17 0 &gpio1 13 0>, /* D11 */
<18 0 &gpio1 14 0>, /* D12 */
<19 0 &gpio1 15 0>, /* D13 */
<20 0 &gpio0 26 0>, /* D14 */
<21 0 &gpio0 27 0>; /* D15 */
};

arduino_adc: analog-connector {
compatible = "arduino,uno-adc";
#io-channel-cells = <1>;
io-channel-map = <0 &adc 1>, /* A0 = P0.3 = AIN1 */
<1 &adc 2>, /* A1 = P0.4 = AIN2 */
<2 &adc 4>, /* A2 = P0.28 = AIN4 */
<3 &adc 5>, /* A3 = P0.29 = AIN5 */
<4 &adc 6>, /* A4 = P0.30 = AIN6 */
<5 &adc 7>; /* A5 = P0.31 = AIN7 */
};

/* These aliases are provided for compatibility with samples */
aliases {
led0 = &led0;
led1 = &led1;
led2 = &led2;
led3 = &led3;
pwm-led0 = &pwm_led0;
sw0 = &button0;
sw1 = &button1;
sw2 = &button2;
sw3 = &button3;
};
};

&adc {
status = "okay";
};

&gpiote {
status = "okay";
};

&gpio0 {
status = "okay";
};

&gpio1 {
status = "okay";
};

&pwm0 {
status = "okay";
ch0-pin = <13>;
ch0-inverted;
};

&uart0 {
compatible = "nordic,nrf-uarte";
status = "okay";
current-speed = <115200>;
tx-pin = <6>;
rx-pin = <8>;
rts-pin = <5>;
cts-pin = <7>;
};

arduino_i2c: &i2c0 {
compatible = "nordic,nrf-twi";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};

&i2c1 {
compatible = "nordic,nrf-twi";
/* Cannot be used together with spi1. */
/* status = "okay"; */
sda-pin = <30>;
scl-pin = <31>;
};

&spi0 {
compatible = "nordic,nrf-spi";
/* Cannot be used together with i2c0. */
/* status = "okay"; */
sck-pin = <27>;
mosi-pin = <26>;
miso-pin = <29>;
};

&spi2 {
compatible = "nordic,nrf-spi";
status = "disabled";
sck-pin = <19>;
mosi-pin = <20>;
miso-pin = <21>;
};

&qspi {
status = "okay";
sck-pin = <19>;
io-pins = <20>, <21>, <22>, <23>;
csn-pins = <17>;
mx25r64: mx25r6435f@0 {
compatible = "nordic,qspi-nor";
reg = <0>;
/* MX24R64 supports only pp and pp4io */
writeoc = "pp4io";
/* MX24R64 supports all readoc options */
readoc = "read4io";
sck-frequency = <8000000>;
label = "MX25R64";
jedec-id = [c2 28 17];
sfdp-bfp = [
e5 20 f1 ff ff ff ff 03 44 eb 08 6b 08 3b 04 bb
ee ff ff ff ff ff 00 ff ff ff 00 ff 0c 20 0f 52
10 d8 00 ff 23 72 f5 00 82 ed 04 cc 44 83 68 44
30 b0 30 b0 f7 c4 d5 5c 00 be 29 ff f0 d0 ff ff
];
size = <67108864>;
has-dpd;
t-enter-dpd = <10000>;
t-exit-dpd = <35000>;
};
};

arduino_spi: &spi3 {
status = "okay";
sck-pin = <47>;
miso-pin = <46>;
mosi-pin = <45>;
cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */
};

&flash0 {

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

boot_partition: partition@0 {
label = "mcuboot";
reg = <0x000000000 0x0000C000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0x00067000>;
};
slot1_partition: partition@73000 {
label = "image-1";
reg = <0x00073000 0x00067000>;
};
scratch_partition: partition@da000 {
label = "image-scratch";
reg = <0x000da000 0x0001e000>;
};

/*
* The flash starting at 0x000f8000 and ending at
* 0x000fffff is reserved for use by the application.
*/

/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@f8000 {
label = "storage";
reg = <0x000f8000 0x00008000>;
};
};
};

&usbd {
compatible = "nordic,nrf-usbd";
status = "okay";
};
21 changes: 21 additions & 0 deletions boards/arm/bmd_345_eval/bmd_345_eval.yaml
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,21 @@
identifier: bmd_345_eval
name: Bmd-345-Eval
type: mcu
arch: arm
ram: 256
flash: 1024
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- ble
- counter
- gpio
- i2c
- pwm
- spi
- usb_cdc
- usb_device
- watchdog
35 changes: 35 additions & 0 deletions boards/arm/bmd_345_eval/bmd_345_eval_defconfig
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,35 @@
# SPDX-License-Identifier: Apache-2.0

CONFIG_SOC_SERIES_NRF52X=y
CONFIG_SOC_NRF52840_QIAA=y
CONFIG_BOARD_BMD_345_EVAL=y

# Enable MPU
CONFIG_ARM_MPU=y

# Enable hardware stack protection
CONFIG_HW_STACK_PROTECTION=y

# Enable RTT
CONFIG_USE_SEGGER_RTT=y

# enable GPIO
CONFIG_GPIO=y

# enable uart driver
CONFIG_SERIAL=y

# enable console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# additional board options
CONFIG_GPIO_AS_PINRESET=y

# PA GPIO Pin
CONFIG_BT_CTLR_GPIO_PA=y
CONFIG_BT_CTLR_GPIO_PA_PIN=37

# LNA GPIO Pin
CONFIG_BT_CTLR_GPIO_LNA=y
CONFIG_BT_CTLR_GPIO_LNA_PIN=38
Loading

0 comments on commit a60bcdc

Please sign in to comment.