NK Storage: Changing Firmware Password doesn't work

[jans23]

No description provided.

[szszszsz]

Hi @jans23 @rudbo !
Does the firmware password has its own retry count? I have not seen any while I wanted to display the counter to the user.

[jans23]

It doesn't has a retry counter. Its a kind of password.

Sent from a mobile device.

[rudbo]

App:
Changing Firmware Password worked, but the app always display an error.
Now the stick is waiting for answer from stick
ab1ed51
Stick:

• Send answer to app when entering the update modus
  Nitrokey/nitrokey-storage-firmware@627ccaf

[jans23]

Still I can't change the Firmware Password. When I try to change the Firmware Password I get no positive or negative response at all. Afterwards the old password still works.

[rudbo]

5139cb9
Wait for response to avoid fast sending next command that overwrite the last command

[szszszsz]

I will reopen for a moment.
I have changed firmware password on my stick from 12345678 to other one and back to 12345678. There had to be some problem here though since I cannot enter into update mode on this device.
@jans23 : Could you enter into update mode on device you have tested? Could you reprogram it?

[szszszsz]

I have logged my second try to make sure it is not entry error. There was no error message shown. I have no debug log from app unfortunately.

Old:  "12345678"
New1:  "123123123"
New2:  "123123123"
==================================
Old:  "123123123"
New1:  "12345678"
New2:  "12345678"

[szszszsz]

Actually it has just went into update mode when retried after factory reset command. I have reinserted the device before and it was not switching to update mode.
I will confirm this once again then. Still if such issue exist, it should be reported as new one instead of writing here.