Customized firmware configuration for Ender3 Pro with SKR mini E3 V3.0 and Sherpa mini extruder

This config is for Marlin firmware bugfix-2.1.x. Version: 02010300

Usage

1. Clone this repository into Marlin directory
2. Install platformio plugin for VSCode
3. Copy Configuration.h, Configuration_adv.h, _Bootscreen.h and _Statusscreen.h into Marlin directory
4. Change platformio.ini default_envs to STM32G0B1RE_btt for SKR mini E3 V3.0
5. Build marlin version with the platformio plugin
6. Copy firmware.bin from .pio folder to SD card and flash it

Hardware

• Ender 3 Pro
• BIGTREETECH-SKR-mini-E3 V3.0 - https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3
• Sherpa mini from Annex Engineering - https://github.com/Annex-Engineering/Sherpa_Mini-Extruder
• Mk8 hotend with Hydra setup
• BLTouch v3.0