core: imx: add i.MX6SX Sabreauto support

Add i.MX6SX Sabreauto support.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

.travis.yml

@@ -195,6 +195,9 @@ script:
   # i.MX6ULL 14X14 EVK
   - $make PLATFORM=imx-mx6ullevk ARCH=arm CFG_PAGEABLE_ADDR=0 CFG_NS_ENTRY_ADDR=0x80800000 CFG_DT=y DEBUG=y CFG_TEE_CORE_LOG_LEVEL=4
 
+  # i.MX6SX SABREAUTO
+  - make PLATFORM=imx-mx6sxsabreauto
+
   # i.MX6Quad SABRE
   - $make PLATFORM=imx-mx6qsabrelite
   - $make PLATFORM=imx-mx6qsabresd

core/arch/arm/plat-imx/conf.mk

@@ -4,6 +4,7 @@ PLATFORM_FLAVOR ?= mx6ulevk
 mx6ul-flavorlist = mx6ulevk
 mx6ull-flavorlist = mx6ullevk
 mx6q-flavorlist = mx6qsabrelite mx6qsabresd
+mx6sx-flavorlist = mx6sxsabreauto
 mx6d-flavorlist =
 mx6dl-flavorlist = mx6dlsabresd
 mx6s-flavorlist =
@@ -21,6 +22,10 @@ else ifneq (,$(filter $(PLATFORM_FLAVOR),$(mx6dl-flavorlist)))
 $(call force,CFG_MX6DL,y)
 else ifneq (,$(filter $(PLATFORM_FLAVOR),$(mx6s-flavorlist)))
 $(call force,CFG_MX6S,y)
+else ifneq (,$(filter $(PLATFORM_FLAVOR),$(mx6sx-flavorlist)))
+$(call force,CFG_MX6,y)
+$(call force,CFG_MX6SX,y)
+$(call force,CFG_IMX_UART,y)
 else ifneq (,$(filter $(PLATFORM_FLAVOR),$(mx7-flavorlist)))
 $(call force,CFG_MX7,y)
 else
@@ -58,7 +63,8 @@ endif
 
 
 # i.MX6 Solo/DualLite/Dual/Quad specific config
-ifeq ($(filter y, $(CFG_MX6Q) $(CFG_MX6D) $(CFG_MX6DL) $(CFG_MX6S)), y)
+ifeq ($(filter y, $(CFG_MX6Q) $(CFG_MX6D) $(CFG_MX6DL) $(CFG_MX6S) \
+      $(CFG_MX6SX)), y)
 include core/arch/arm/cpu/cortex-a9.mk
 
 $(call force,CFG_MX6,y)
@@ -78,6 +84,17 @@ $(call force,CFG_SECURE_TIME_SOURCE_REE,y)
 CFG_BOOT_SECONDARY_REQUEST ?= y
 endif
 
+ifneq (,$(filter $(PLATFORM_FLAVOR),mx6sxsabreauto))
+CFG_PAGEABLE_ADDR ?= 0
+CFG_DDR_SIZE ?= 0x80000000
+CFG_DT ?= y
+CFG_NS_ENTRY_ADDR ?= 0x80800000
+CFG_PSCI_ARM32 ?= y
+CFG_BOOT_SYNC_CPU = n
+CFG_BOOT_SECONDARY_REQUEST = n
+CFG_TEE_CORE_NB_CORE ?= 1
+endif
+
 ifeq ($(filter y, $(CFG_PSCI_ARM32)), y)
 CFG_HWSUPP_MEM_PERM_WXN = n
 CFG_IMX_WDOG ?= y

core/arch/arm/plat-imx/config/config_imx6sx.h

@@ -0,0 +1,154 @@
+/*
+ * Copyright 2017 NXP
+ * All rights reserved.
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __CONFIG_IMX6SX_H
+#define __CONFIG_IMX6SX_H
+
+#ifndef CFG_UART_BASE
+#define CFG_UART_BASE	(UART1_BASE)
+#endif
+
+#ifndef CFG_DDR_SIZE
+#error "CFG_DDR_SIZE not defined"
+#endif
+
+#define DRAM0_SIZE		CFG_DDR_SIZE
+
+/* Location of trusted dram */
+#define TZDRAM_BASE		(DRAM0_BASE - 32 * 1024 * 1024 + CFG_DDR_SIZE)
+#define TZDRAM_SIZE		(30 * 1024 * 1024)
+
+/* Full GlobalPlatform test suite requires CFG_SHMEM_SIZE to be at least 2MB */
+#define CFG_SHMEM_START		(TZDRAM_BASE + TZDRAM_SIZE)
+#define CFG_SHMEM_SIZE		0x200000
+
+#define CFG_TEE_RAM_VA_SIZE	(1024 * 1024)
+
+/*
+ * Everything is in TZDRAM.
+ * +------------------+
+ * |        | TEE_RAM |
+ * + TZDRAM +---------+
+ * |        | TA_RAM  |
+ * +--------+---------+
+ */
+#define CFG_TEE_RAM_PH_SIZE     CFG_TEE_RAM_VA_SIZE
+#define CFG_TEE_RAM_START	TZDRAM_BASE
+#define CFG_TA_RAM_START	ROUNDUP((TZDRAM_BASE + CFG_TEE_RAM_VA_SIZE), \
+					CORE_MMU_DEVICE_SIZE)
+#define CFG_TA_RAM_SIZE		ROUNDDOWN((TZDRAM_SIZE - CFG_TEE_RAM_VA_SIZE), \
+					  CORE_MMU_DEVICE_SIZE)
+
+#ifndef CFG_TEE_LOAD_ADDR
+#define CFG_TEE_LOAD_ADDR	CFG_TEE_RAM_START
+#endif
+
+#define CONSOLE_UART_BASE	(CFG_UART_BASE)
+
+/*
+ * PL310 TAG RAM Control Register
+ *
+ * bit[10:8]:1 - 2 cycle of write accesses latency
+ * bit[6:4]:3 - 4 cycle of read accesses latency
+ * bit[2:0]:2 - 3 cycle of setup latency
+ */
+#ifndef PL310_TAG_RAM_CTRL_INIT
+#define PL310_TAG_RAM_CTRL_INIT		0x00000132
+#endif
+
+/*
+ * PL310 DATA RAM Control Register
+ *
+ * bit[10:8]:1 - 2 cycle of write accesses latency
+ * bit[6:4]:3 - 4 cycle of read accesses latency
+ * bit[2:0]:2 - 3 cycle of setup latency
+ */
+#ifndef PL310_DATA_RAM_CTRL_INIT
+#define PL310_DATA_RAM_CTRL_INIT	0x00000232
+#endif
+
+/*
+ * PL310 Auxiliary Control Register
+ *
+ * I/Dcache prefetch enabled (bit29:28=2b11)
+ * NS can access interrupts (bit27=1)
+ * NS can lockown cache lines (bit26=1)
+ * Pseudo-random replacement policy (bit25=0)
+ * Force write allocated (default)
+ * Shared attribute internally ignored (bit22=1, bit13=0)
+ * Parity disabled (bit21=0)
+ * Event monitor disabled (bit20=0)
+ * Platform fmavor specific way config (dual / quad):
+ * - 16kb way size (bit19:17=3b001)
+ * - 16-way associciativity (bit16=1)
+ * Store buffer device limitation enabled (bit11=1)
+ * Cacheable accesses have high prio (bit10=0)
+ * Full Line Zero (FLZ) disabled (bit0=0)
+ */
+#define PL310_AUX_CTRL_INIT		0x3C430800
+
+/*
+ * PL310 Prefetch Control Register
+ *
+ * Double linefill disabled (bit30=0)
+ * I/D prefetch enabled (bit29:28=2b11)
+ * Prefetch drop enabled (bit24=1)
+ * Incr double linefill disable (bit23=0)
+ * Prefetch offset = 7 (bit4:0)
+ */
+#define PL310_PREFETCH_CTRL_INIT	0x31000007
+
+/*
+ * PL310 Power Register
+ *
+ * Dynamic clock gating enabled
+ * Standby mode enabled
+ */
+#define PL310_POWER_CTRL_INIT		0x00000003
+
+/*
+ * SCU Invalidate Register
+ *
+ * Invalidate all registers
+ */
+#define	SCU_INV_CTRL_INIT		0xFFFFFFFF
+
+/*
+ * SCU Access Register
+ * - both secure CPU access SCU
+ */
+#define SCU_SAC_CTRL_INIT		0x0000000F
+
+/*
+ * SCU NonSecure Access Register
+ * - both nonsec cpu access SCU, private and global timer
+ */
+#define SCU_NSAC_CTRL_INIT		0x00000FFF
+
+#endif

core/arch/arm/plat-imx/imx-regs.h

@@ -132,7 +132,7 @@
 #define IOMUXC_GPR10_OCRAM_TZ_ADDR_LOCK_OFFSET_6UL	(27)
 #define IOMUXC_GPR10_OCRAM_TZ_ADDR_LOCK_MASK_6UL	GENMASK_32(31, 27)
 
-#if defined(CFG_MX6UL) || defined(CFG_MX6ULL)
+#if defined(CFG_MX6UL) || defined(CFG_MX6ULL) || defined(CFG_MX6SX)
 #define DRAM0_BASE			0x80000000
 #else
 #define DRAM0_BASE			0x10000000

core/arch/arm/plat-imx/platform_config.h

@@ -38,6 +38,9 @@
 #if defined(CFG_MX7)
 #include <config/config_imx7.h>
 
+#elif defined(CFG_MX6SX)
+#include <config/config_imx6sx.h>
+
 /* For i.MX 6UltraLite and 6ULL EVK board */
 #elif defined(CFG_MX6UL) || defined(CFG_MX6ULL)
 #include <imx-regs.h>

core/arch/arm/plat-imx/sub.mk

@@ -12,7 +12,8 @@ endif
 
 cflags-pm/psci.c-y += -Wno-suggest-attribute=noreturn
 
-ifneq (,$(filter y, $(CFG_MX6Q) $(CFG_MX6D) $(CFG_MX6DL) $(CFG_MX6S)))
+ifneq (,$(filter y, $(CFG_MX6Q) $(CFG_MX6D) $(CFG_MX6DL) $(CFG_MX6S) \
+       $(CFG_MX6SX)))
 srcs-y += a9_plat_init.S imx6.c
 endif