ERC4626

CHANGELOG.md

@@ -6,6 +6,8 @@
  * `TimelockController`: Migrate `_call` to `_execute` and allow inheritance and overriding similar to `Governor`. ([#3317](https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3317))
  * `CrossChainEnabledPolygonChild`: replace the `require` statement with the custom error `NotCrossChainCall`. ([#3380](https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3380))
  * `ERC20FlashMint`: Add customizable flash fee receiver. ([#3327](https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3327))
+ * `ERC20TokenizedVault`: add an extension of `ERC20` that implements the ERC4626 Tokenized Vault Standard. ([#3171](https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3171))
+ * `Math`: add a `mulDiv` function that can round the result either up or down. ([#3171](https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3171))
  * `Strings`: add a new overloaded function `toHexString` that converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation. ([#3403](https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3403))
 
 ## 4.6.0 (2022-04-26)

contracts/interfaces/IERC4626.sol

@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: MIT
+
+pragma solidity ^0.8.0;
+
+import "../token/ERC20/IERC20.sol";
+import "../token/ERC20/extensions/IERC20Metadata.sol";
+
+/**
+ * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
+ * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
+ *
+ * _Available since v4.7._
+ */
+interface IERC4626 is IERC20, IERC20Metadata {
+    event Deposit(address indexed caller, address indexed owner, uint256 assets, uint256 shares);
+
+    event Withdraw(
+        address indexed caller,
+        address indexed receiver,
+        address indexed owner,
+        uint256 assets,
+        uint256 shares
+    );
+
+    /**
+     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
+     *
+     * - MUST be an ERC-20 token contract.
+     * - MUST NOT revert.
+     */
+    function asset() external view returns (address assetTokenAddress);
+
+    /**
+     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
+     *
+     * - SHOULD include any compounding that occurs from yield.
+     * - MUST be inclusive of any fees that are charged against assets in the Vault.
+     * - MUST NOT revert.
+     */
+    function totalAssets() external view returns (uint256 totalManagedAssets);
+
+    /**
+     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
+     * scenario where all the conditions are met.
+     *
+     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
+     * - MUST NOT show any variations depending on the caller.
+     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
+     * - MUST NOT revert.
+     *
+     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
+     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
+     * from.
+     */
+    function convertToShares(uint256 assets) external view returns (uint256 shares);
+
+    /**
+     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
+     * scenario where all the conditions are met.
+     *
+     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
+     * - MUST NOT show any variations depending on the caller.
+     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
+     * - MUST NOT revert.
+     *
+     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
+     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
+     * from.
+     */
+    function convertToAssets(uint256 shares) external view returns (uint256 assets);
+
+    /**
+     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
+     * through a deposit call.
+     *
+     * - MUST return a limited value if receiver is subject to some deposit limit.
+     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
+     * - MUST NOT revert.
+     */
+    function maxDeposit(address receiver) external view returns (uint256 maxAssets);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
+     * current on-chain conditions.
+     *
+     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
+     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
+     *   in the same transaction.
+     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
+     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
+     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
+     */
+    function previewDeposit(uint256 assets) external view returns (uint256 shares);
+
+    /**
+     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
+     *
+     * - MUST emit the Deposit event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
+     *   deposit execution, and are accounted for during deposit.
+     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
+     *   approving enough underlying tokens to the Vault contract, etc).
+     *
+     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
+     */
+    function deposit(uint256 assets, address receiver) external returns (uint256 shares);
+
+    /**
+     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
+     * - MUST return a limited value if receiver is subject to some mint limit.
+     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
+     * - MUST NOT revert.
+     */
+    function maxMint(address receiver) external view returns (uint256 maxShares);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
+     * current on-chain conditions.
+     *
+     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
+     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
+     *   same transaction.
+     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
+     *   would be accepted, regardless if the user has enough tokens approved, etc.
+     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by minting.
+     */
+    function previewMint(uint256 shares) external view returns (uint256 assets);
+
+    /**
+     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
+     *
+     * - MUST emit the Deposit event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
+     *   execution, and are accounted for during mint.
+     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
+     *   approving enough underlying tokens to the Vault contract, etc).
+     *
+     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
+     */
+    function mint(uint256 shares, address receiver) external returns (uint256 assets);
+
+    /**
+     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
+     * Vault, through a withdraw call.
+     *
+     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
+     * - MUST NOT revert.
+     */
+    function maxWithdraw(address owner) external view returns (uint256 maxAssets);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
+     * given current on-chain conditions.
+     *
+     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
+     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
+     *   called
+     *   in the same transaction.
+     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
+     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
+     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
+     */
+    function previewWithdraw(uint256 assets) external view returns (uint256 shares);
+
+    /**
+     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
+     *
+     * - MUST emit the Withdraw event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
+     *   withdraw execution, and are accounted for during withdraw.
+     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
+     *   not having enough shares, etc).
+     *
+     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
+     * Those methods should be performed separately.
+     */
+    function withdraw(
+        uint256 assets,
+        address receiver,
+        address owner
+    ) external returns (uint256 shares);
+
+    /**
+     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
+     * through a redeem call.
+     *
+     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
+     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
+     * - MUST NOT revert.
+     */
+    function maxRedeem(address owner) external view returns (uint256 maxShares);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
+     * given current on-chain conditions.
+     *
+     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
+     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
+     *   same transaction.
+     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
+     *   redemption would be accepted, regardless if the user has enough shares, etc.
+     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
+     */
+    function previewRedeem(uint256 shares) external view returns (uint256 assets);
+
+    /**
+     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
+     *
+     * - MUST emit the Withdraw event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
+     *   redeem execution, and are accounted for during redeem.
+     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
+     *   not having enough shares, etc).
+     *
+     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
+     * Those methods should be performed separately.
+     */
+    function redeem(
+        uint256 shares,
+        address receiver,
+        address owner
+    ) external returns (uint256 assets);
+}

contracts/mocks/ERC20TokenizedVaultMock.sol

@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: MIT
+
+pragma solidity ^0.8.0;
+
+import "../token/ERC20/extensions/ERC20TokenizedVault.sol";
+
+// mock class using ERC20
+contract ERC20TokenizedVaultMock is ERC20TokenizedVault {
+    constructor(
+        IERC20Metadata asset,
+        string memory name,
+        string memory symbol
+    ) ERC20(name, symbol) ERC20TokenizedVault(asset) {}
+
+    function mockMint(address account, uint256 amount) public {
+        _mint(account, amount);
+    }
+
+    function mockBurn(address account, uint256 amount) public {
+        _burn(account, amount);
+    }
+}

contracts/mocks/MathMock.sol

@@ -20,4 +20,13 @@ contract MathMock {
     function ceilDiv(uint256 a, uint256 b) public pure returns (uint256) {
         return Math.ceilDiv(a, b);
     }
+
+    function mulDiv(
+        uint256 a,
+        uint256 b,
+        uint256 denominator,
+        Math.Rounding direction
+    ) public pure returns (uint256) {
+        return Math.mulDiv(a, b, denominator, direction);
+    }
 }

contracts/token/ERC20/README.adoc

@@ -24,6 +24,7 @@ Additionally there are multiple custom extensions, including:
 * {ERC20Votes}: support for voting and vote delegation.
 * {ERC20VotesComp}: support for voting and vote delegation (compatible with Compound's token, with uint96 restrictions).
 * {ERC20Wrapper}: wrapper to create an ERC20 backed by another ERC20, with deposit and withdraw methods. Useful in conjunction with {ERC20Votes}.
+* {ERC20TokenizedVault}: tokenized vault that manages shares (represented as ERC20) that are backed by assets (another ERC20).
 
 Finally, there are some utilities to interact with ERC20 contracts in various ways.
 
@@ -62,6 +63,8 @@ NOTE: This core set of contracts is designed to be unopinionated, allowing devel
 
 {{ERC20FlashMint}}
 
+{{ERC20TokenizedVault}}
+
 == Draft EIPs
 
 The following EIPs are still in Draft status. Due to their nature as drafts, the details of these contracts may change and we cannot guarantee their xref:ROOT:releases-stability.adoc[stability]. Minor releases of OpenZeppelin Contracts may contain breaking changes for the contracts in this directory, which will be duly announced in the https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/CHANGELOG.md[changelog]. The EIPs included here are used by projects in production and this may make them less likely to change significantly.