 |
 |
 |
 |
 |
|---|
This project is a quick start for the RAKwireless WisBlock RAK4631 LPWAN module. It gives the opportunity to test the LPWAN functionality without writing and flashing code.
It is a very simple firmware that provides an AT Command Interface over USB or BLE UART of the module. It is not optimized for low power consumption.
The LPWAN credentials are stored in the flash memory of the RAK4631 LPWAN module. The firmware is written using the Arduino framework, the source code is provided for both Arduino IDE and for PlatformIO. It uses the Nordic nRF52 boards package which needs to be patched with the RAK_Patch to support the RAK4631.
All AT commands are listed and explained in the AT-Command Manual.
Set the DevEUI
AT+DEVEUI=5555555553525150
Set the AppEUI
AT+APPEUI=5051525355555555
Set the AppKey
AT+APPKEY=55555555535251505051525355555555
Set the Region (US915)
AT+BAND=8
Check the settings
AT+STATUS=?
Start network join (requires a gateway connected to a LPWAN server and the device registered on the LPWAN server with above credentials)
AT+JOIN=1,0,1,1
Log output:
============================
WisBlock Node
SW Version 1.0.5
LoRa(R) is a registered trademark or service mark of Semtech Corporation or its affiliates.
LoRaWAN(R) is a licensed mark.
============================
Device status:
RAK4631
Auto join enabled
Mode LPWAN
Network not joined
Send Frequency 0
LPWAN status:
Dev EUI AC1F09FFFE0679DB
App EUI 70B3D57ED00201E1
App Key 2B84E0B09B68E5CB42176FE753DCEE79
Dev Addr 26021FB4
NWS Key 323D155A000DF335307A16DA0C9DF53F
Apps Key 3F6A66459D5EDCA63CBC4619CD61A11E
OTAA enabled
ADR disabled
Public Network
Dutycycle disabled
Join trials 5
TX Power 0
DR 3
Class 0
Subband 1
Fport 2
Unconfirmed Message
Region AS923-3
LoRa P2P status:
P2P frequency 916000000
P2P TX Power 22
P2P BW 125
P2P SF 7
P2P CR 1
P2P Preamble length 8
P2P Symbol Timeout 0
============================
AT+JOIN=1:0:30:10
AT+JOIN=1:0:30:10
OK
AT+JOIN=SUCCESS