Merge #19804 #19807 #19809

19804: cpu/nrf{53,9160}: add periph_rtt support r=benpicco a=dylad

### Contribution description

This PR enables support for `periph_rtt` on both nRF9160 and nRF53.
This PR is based on #19803 

I was only able to test on nrf5340dk-app as I don't have access to any nrf9160-based board.

Here is `test/periph/rtt` output for reference on `nrf5340dk-app`:

### Testing procedure
flash `tests/periph/rtt` on `nrf9160dk` or `nrf5340dk-app`  and check the results.
```
s
2023-07-06 16:11:16,471 # START
2023-07-06 16:11:16,479 # main(): This is RIOT! (Version: 2023.07-devel-765-g02c65-cpu/nrf53/add_rtt_support)
2023-07-06 16:11:16,480 # 
2023-07-06 16:11:16,482 # RIOT RTT low-level driver test
2023-07-06 16:11:16,483 # RTT configuration:
2023-07-06 16:11:16,485 # RTT_MAX_VALUE: 0x00ffffff
2023-07-06 16:11:16,487 # RTT_FREQUENCY: 1024
2023-07-06 16:11:16,487 # 
2023-07-06 16:11:16,494 # Testing the tick conversion (with rounding if RTT_FREQUENCY is not power of 2)
2023-07-06 16:11:16,498 # Trying to convert 1 to seconds and back
2023-07-06 16:11:16,501 # Trying to convert 256 to seconds and back
2023-07-06 16:11:16,505 # Trying to convert 65536 to seconds and back
2023-07-06 16:11:16,509 # Trying to convert 16777216 to seconds and back
2023-07-06 16:11:16,514 # Trying to convert 2147483648 to seconds and back
2023-07-06 16:11:16,514 # All ok
2023-07-06 16:11:16,514 # 
2023-07-06 16:11:16,517 # Initializing the RTT driver
2023-07-06 16:11:16,835 # This test will now display 'Hello' every 5 seconds
2023-07-06 16:11:16,835 # 
2023-07-06 16:11:16,836 # RTT now: 4
2023-07-06 16:11:16,840 # Setting initial alarm to now + 5 s (5124)
2023-07-06 16:11:16,841 # rtt_get_alarm() PASSED
2023-07-06 16:11:16,846 # Done setting up the RTT, wait for many Hellos
2023-07-06 16:11:16,852 # { "threads": [{ "name": "main", "stack_size": 1536, "stack_used": 404 }]}
2023-07-06 16:11:21,833 # Hello
2023-07-06 16:11:26,831 # Hello
2023-07-06 16:11:31,830 # Hello
2023-07-06 16:11:36,828 # Hello
2023-07-06 16:11:41,826 # Hello
2023-07-06 16:11:46,825 # Hello
2023-07-06 16:11:51,823 # Hello
2023-07-06 16:11:56,821 # Hello
2023-07-06 16:12:01,821 # Hello
2023-07-06 16:12:06,819 # Hello
2023-07-06 16:12:11,817 # Hello
2023-07-06 16:12:16,815 # Hello
2023-07-06 16:12:21,813 # Hello
2023-07-06 16:12:26,811 # Hello
```
### Issues/PRs references
based on #19803 

19807: boards/esp32s2-lilygo-ttgo-t8: fix display configuration r=benpicco a=gschorcht

### Contribution description

This PR fixes the display configuration for the ESP32-S2 LilyGO TTGO T8 (also known as LilyGo T-Display S2) which uses a ST7789 as display driver IC that is compatible with the ST7735.

For that purpose the ST7735 driver is extended by a pseudomodule definition `st7789` for the ST7789 which is enabled by the board and enables automatically the `st7789` (f57b6b7). Vise versa, board's `Makefile.dep` enables automatically the `st7789` pseudomodule if the `st7735` is used. The pseudomodule `st7789` is just used to increase the upper limit for supported lines.

### Testing procedure

```
BOARD=esp32s2-lilygo-ttgo-t8 make -C tests/drivers/st7735/ flash
```
should work:

![IMG_20230707_112616](https://github.com/RIOT-OS/RIOT/assets/31932013/4393866b-27d9-4a6a-96fc-7c460be35cde)

### Issues/PRs references

19809: cpu/nrf53: add usbdev support r=benpicco a=dylad

### Contribution description
This PR enables `periph_usbdev` support on nRF5340DK-app board. Since the IP is the same as nRF52, the driver and its related data and structs were moved from `cpu/nrf52` to `cpu/nrf5x_common`


### Testing procedure
Test any USBUS related test application on `nrf5340dk-app`

`CFLAGS='-DSECTOR_COUNT=64' USEMODULE='mtd_emulated' make BOARD=nrf5340dk-app -C tests/sys/usbus_msc flash`

dmesg output:
```
[ 7466.262760] usb 1-2.1: new full-speed USB device number 16 using xhci_hcd
[ 7466.483916] usb 1-2.1: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
[ 7466.483925] usb 1-2.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 7466.483928] usb 1-2.1: Product: nrf5340dk-app
[ 7466.483931] usb 1-2.1: Manufacturer: RIOT-os.org
[ 7466.483933] usb 1-2.1: SerialNumber: AD0FD4AE806080C2
[ 7466.487010] usb-storage 1-2.1:1.0: USB Mass Storage device detected
[ 7466.487348] scsi host2: usb-storage 1-2.1:1.0
[ 7467.516789] scsi 2:0:0:0: Direct-Access     RIOT-OS  RIOT_MSC_DISK     1.0 PQ: 0 ANSI: 1
[ 7467.517152] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 7467.517501] sd 2:0:0:0: [sdd] 64 512-byte logical blocks: (32.8 kB/32.0 KiB)
[ 7467.517732] sd 2:0:0:0: [sdd] Write Protect is off
[ 7467.517733] sd 2:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 7467.517906] sd 2:0:0:0: [sdd] No Caching mode page found
[ 7467.517910] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 7467.532159] sd 2:0:0:0: [sdd] Attached SCSI removable disk
```

I also tested `tests/sys/usbus_cdc_ecm` and `tests/sys/usbus/usbus_hid` succesfully.


### Issues/PRs references



Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>

boards/esp32s2-lilygo-ttgo-t8/Kconfig

@@ -26,7 +26,7 @@ config BOARD_ESP32S2_LILYGO_TTGO_T8
     select HAS_SDCARD_SPI
     select HAS_TINYUSB_DEVICE
     select HAVE_MTD_SDCARD_DEFAULT
-    select HAVE_ST7735
+    select HAVE_ST7789
     select MODULE_FATFS_VFS if MODULE_VFS_DEFAULT
 
 config FORCE_USB_STDIO

boards/esp32s2-lilygo-ttgo-t8/Makefile.dep

@@ -13,7 +13,12 @@ ifneq (,$(filter vfs_default,$(USEMODULE)))
 endif
 
 ifneq (,$(filter disp_dev,$(USEMODULE)))
-  USEMODULE += st7735
+  USEMODULE += st7789
+endif
+
+ifneq (,$(filter st7735,$(USEMODULE)))
+  # use st7789 pseudomodule if st7735 is enabled to indicate that we use a ST7789
+  USEMODULE += st7789
 endif
 
 include $(RIOTBOARD)/common/esp32s2/Makefile.dep

boards/esp32s2-lilygo-ttgo-t8/doc.txt

@@ -25,8 +25,8 @@
 
 ## Overview {#esp32s2_lilygo_ttgo_t8_overview}
 
-The Espressif LILYGO TTGO T8 ESP32-S2 is a ESP32-S2 board with an OLED Display
-(not yet supported) and a TF Card slot.
+The Espressif LILYGO TTGO T8 ESP32-S2 (also known as LilyGo T-Display S2) is
+a ESP32-S2 board with an OLED Display and a TF Card slot.
 
 \image html https://ae01.alicdn.com/kf/H8062f551fe7b4233809294d4a5b1d45d1.jpg "LILYGO TTGO T8 ESP32-S2" width=600px
 
@@ -39,7 +39,7 @@ ESP32-S2 SoC         | yes
 8 MB QSPI RAM        | yes
 SD Card slot         | yes
 32.768KHz Crystal    | yes
-OLED display ST77789 | no
+OLED display ST77789 | yes
 
 [Back to table of contents](#esp32s2_lilygo_ttgo_t8_toc)
 
@@ -49,7 +49,6 @@ This section describes
 
 - the [MCU](#esp32s2_lilygo_ttgo_t8_mcu),
 - the default [board configuration](#esp32s2_lilygo_ttgo_t8_board_configuration),
-- [optional hardware configurations](#esp32s2_lilygo_ttgo_t8_optional_hardware),
 - the [board pinout](#esp32s2_lilygo_ttgo_t8_pinout).
 
 [Back to table of contents](#esp32s2_lilygo_ttgo_t8_toc)

boards/esp32s2-lilygo-ttgo-t8/include/board.h

@@ -88,16 +88,19 @@
  * @{
  */
 #if defined(MODULE_ST7735)
-#define ST7735_PARAM_SPI            SPI_DEV(1)      /**< SPI device */
-#define ST7735_PARAM_SPI_CLK        SPI_CLK_5MHZ    /**< SPI clock frequency */
+#define ST7735_PARAM_SPI            SPI_DEV(0)      /**< SPI device */
+#define ST7735_PARAM_SPI_CLK        SPI_CLK_10MHZ   /**< SPI clock frequency */
 #define ST7735_PARAM_SPI_MODE       SPI_MODE_0      /**< SPI mode */
 #define ST7735_PARAM_CS             GPIO34          /**< Chip Select pin */
 #define ST7735_PARAM_DCX            GPIO37          /**< DCX pin */
 #define ST7735_PARAM_RST            GPIO38          /**< Reset pin */
 #define ST7735_PARAM_RGB            1               /**< RGB mode enable */
-#define ST7735_PARAM_INVERTED       0               /**< Inverted mode enable */
-#define ST7735_PARAM_NUM_LINES      135U            /**< Number of lines */
-#define ST7735_PARAM_RGB_CHANNELS   240U            /**< Number of columns */
+#define ST7735_PARAM_INVERTED       1               /**< Inverted mode enable */
+#define ST7735_PARAM_NUM_LINES      240U            /**< Number of lines */
+#define ST7735_PARAM_RGB_CHANNELS   135U            /**< Number of columns */
+#define ST7735_PARAM_ROTATION       LCD_MADCTL_MY   /**< Rotation */
+#define ST7735_PARAM_OFFSET_X       40              /**< X offset */
+#define ST7735_PARAM_OFFSET_Y       52              /**< Y offset */
 #endif
 /** @} */
 

boards/esp32s2-lilygo-ttgo-t8/include/periph_conf.h

@@ -147,7 +147,7 @@ extern "C" {
 #define SPI0_SCK    GPIO36  /**< FSPICLK used as signal `OLED_CLK` */
 #endif
 #ifndef SPI0_MISO
-#define SPI0_MISO   GPIO37  /**< FSPIQ used as Display signal `OLED_MISO` */
+#define SPI0_MISO   GPIO9   /**< FSPIHD dummy (not broken out), GPIO37 is used as DCX */
 #endif
 #ifndef SPI0_MOSI
 #define SPI0_MOSI   GPIO35  /**< FSPID used as Display signal `OLED_MOSI` */

boards/nrf5340dk-app/Kconfig

@@ -11,8 +11,10 @@ config BOARD_NRF5340DK_APP
     bool
     default y
     select CPU_MODEL_NRF5340_APP
+    select HAS_PERIPH_RTT
     select HAS_PERIPH_TIMER
     select HAS_PERIPH_UART
     select HAS_PERIPH_UART_HW_FC
+    select HAS_PERIPH_USBDEV
 
     # Put other features for this board (in alphabetical order)

boards/nrf5340dk-app/Makefile.features

@@ -2,6 +2,8 @@ CPU_MODEL = nrf5340_app
 CPU = nrf53
 
 # Put defined MCU peripherals here (in alphabetical order)
+FEATURES_PROVIDED += periph_rtt
 FEATURES_PROVIDED += periph_timer
 FEATURES_PROVIDED += periph_uart
 FEATURES_PROVIDED += periph_uart_hw_fc
+FEATURES_PROVIDED += periph_usbdev

boards/nrf5340dk-app/include/periph_conf.h

@@ -75,6 +75,24 @@ static const uart_conf_t uart_config[] = {
 #define UART_NUMOF          ARRAY_SIZE(uart_config) /**< UART configuration NUMOF */
 /** @} */
 
+/**
+ * @name    Real time counter configuration
+ * @{
+ */
+#ifndef RTT_DEV
+#define RTT_DEV             (0)                 /**< NRF_RTC0_S */
+#endif
+
+#define RTT_MAX_VALUE       (0x00ffffff)         /**< 24bit */
+#define RTT_MAX_FREQUENCY   (32768U)             /**< in Hz */
+#define RTT_MIN_FREQUENCY   (8U)                 /**< in Hz */
+#define RTT_CLOCK_FREQUENCY (32768U)             /**< in Hz, LFCLK*/
+
+#ifndef RTT_FREQUENCY
+#define RTT_FREQUENCY       (1024U)              /**< in Hz */
+#endif
+/** @} */
+
 #ifdef __cplusplus
 }
 #endif

boards/nrf9160dk/Kconfig

@@ -12,6 +12,7 @@ config BOARD_NRF9160DK
     default y
     select CPU_MODEL_NRF9160
     select HAS_PERIPH_I2C
+    select HAS_PERIPH_RTT
     select HAS_PERIPH_SPI
     select HAS_PERIPH_TIMER
     select HAS_PERIPH_UART

boards/nrf9160dk/Makefile.features

@@ -3,6 +3,7 @@ CPU = nrf9160
 
 # Put defined MCU peripherals here (in alphabetical order)
 FEATURES_PROVIDED += periph_i2c
+FEATURES_PROVIDED += periph_rtt
 FEATURES_PROVIDED += periph_spi
 FEATURES_PROVIDED += periph_timer
 FEATURES_PROVIDED += periph_uart

boards/nrf9160dk/include/periph_conf.h

@@ -119,6 +119,24 @@ static const uart_conf_t uart_config[] = {
 #define UART_NUMOF          ARRAY_SIZE(uart_config) /**< UART confgiguration NUMOF */
 /** @} */
 
+/**
+ * @name    Real time counter configuration
+ * @{
+ */
+#ifndef RTT_DEV
+#define RTT_DEV             (0)                 /**< NRF_RTC0_S */
+#endif
+
+#define RTT_MAX_VALUE       (0x00ffffff)         /**< 24bit */
+#define RTT_MAX_FREQUENCY   (32768U)             /**< in Hz */
+#define RTT_MIN_FREQUENCY   (8U)                 /**< in Hz */
+#define RTT_CLOCK_FREQUENCY (32768U)             /**< in Hz, LFCLK*/
+
+#ifndef RTT_FREQUENCY
+#define RTT_FREQUENCY       (1024U)              /**< in Hz */
+#endif
+/** @} */
+
 #ifdef __cplusplus
 }
 #endif

cpu/nrf52/include/periph_cpu.h

@@ -280,16 +280,6 @@ void nrf5x_spi_acquire(NRF_SPIM_Type *bus, spi_twi_irq_cb_t cb, void *arg);
  */
 void nrf5x_spi_release(NRF_SPIM_Type *bus);
 
-/**
- * @brief USBDEV buffers must be word aligned because of DMA restrictions
- */
-#define USBDEV_CPU_DMA_ALIGNMENT       (4)
-
-/**
- * @brief USBDEV buffer instantiation requirement
- */
-#define USBDEV_CPU_DMA_REQUIREMENTS    __attribute__((aligned(USBDEV_CPU_DMA_ALIGNMENT)))
-
 #ifdef __cplusplus
 }
 #endif

cpu/nrf53/cpu.c

@@ -61,6 +61,13 @@ static_assert((CLOCK_CORECLOCK == MHZ(128)) || CLOCK_CORECLOCK == MHZ(64));
     /* For now, disable the unused network core */
     NRF_RESET_S->NETWORK.FORCEOFF = 1;
 
+#if defined(MODULE_PERIPH_RTT) && (CLOCK_LFCLK==CLOCK_LFCLKSRC_SRC_LFXO)
+    /* Enable P0.00 and P0.01 as XL1/XL2 if LXFO is selected */
+    NRF_P0_S->PIN_CNF[0] &= ~GPIO_PIN_CNF_MCUSEL_Msk;
+    NRF_P0_S->PIN_CNF[0] |= GPIO_PIN_CNF_MCUSEL_Peripheral << GPIO_PIN_CNF_MCUSEL_Pos;
+    NRF_P0_S->PIN_CNF[1] &= ~GPIO_PIN_CNF_MCUSEL_Msk;
+    NRF_P0_S->PIN_CNF[1] |= GPIO_PIN_CNF_MCUSEL_Peripheral << GPIO_PIN_CNF_MCUSEL_Pos;
+#endif
     /* call cortexm default initialization */
     cortexm_init();
 

cpu/nrf5x_common/include/periph_cpu_common.h

@@ -302,6 +302,16 @@ typedef struct {
 
 #endif /* ndef CPU_MODEL_NRF52832XXAA && ndef CPU_FAM_NRF51 */
 
+/**
+ * @brief USBDEV buffers must be word aligned because of DMA restrictions
+ */
+#define USBDEV_CPU_DMA_ALIGNMENT       (4)
+
+/**
+ * @brief USBDEV buffer instantiation requirement
+ */
+#define USBDEV_CPU_DMA_REQUIREMENTS    __attribute__((aligned(USBDEV_CPU_DMA_ALIGNMENT)))
+
 #ifdef __cplusplus
 }
 #endif

cpu/nrf5x_common/periph/rtt.c

@@ -26,6 +26,19 @@
 #include "periph/rtt.h"
 
 /* get the IRQ configuration */
+#ifdef NRF_RTC0_S
+#if (RTT_DEV == 0)
+#define DEV             NRF_RTC0_S
+#define ISR             isr_rtc0
+#define IRQn            RTC0_IRQn
+#elif (RTT_DEV == 1)
+#define DEV             NRF_RTC1_S
+#define ISR             isr_rtc1
+#define IRQn            RTC1_IRQn
+#else
+#error "RTT configuration: invalid or no RTC device specified (RTT_DEV)"
+#endif
+#else
 #if (RTT_DEV == 1)
 #define DEV             NRF_RTC1
 #define ISR             isr_rtc1
@@ -37,6 +50,7 @@
 #else
 #error "RTT configuration: invalid or no RTC device specified (RTT_DEV)"
 #endif
+#endif /* def NRF_RTC0_S */
 
 /* allocate memory for callbacks and their args */
 static rtt_cb_t alarm_cb;

cpu/nrf52/periph/usbdev.c → cpu/nrf5x_common/periph/usbdev.c

@@ -38,6 +38,11 @@
 #define ENABLE_DEBUG 0
 #include "debug.h"
 
+/* Compatibility wrapper for nRF53 */
+#ifdef NRF_USBD_S
+#define NRF_USBD NRF_USBD_S
+#endif
+
 static nrfusb_t _usbdevs[NRF_USB_NUM_PERIPH];
 
 static void _init(usbdev_t *usbdev);

drivers/Makefile.dep

@@ -204,6 +204,10 @@ ifneq (,$(filter stmpe811_%,$(USEMODULE)))
   USEMODULE += stmpe811
 endif
 
+ifneq (,$(filter st7789,$(USEMODULE)))
+  USEMODULE += st7735
+endif
+
 ifneq (,$(filter sx126%,$(USEMODULE)))
   USEMODULE += sx126x
 endif

drivers/include/st7735.h

@@ -28,6 +28,10 @@
  * when strictly necessary. This option will slow down the driver as it
  * certainly can't use DMA anymore, every short has to be converted before
  * transfer.
+ *
+ * @note The driver can also be used for the ST7789 which is compatible with
+ *       the ST7735 but supports higher resolutions. Just enable the module
+ *       `st7789` instead of `st7735` if your board uses the ST7789.
  */
 
 

drivers/st7735/Kconfig

@@ -22,6 +22,16 @@ config HAVE_ST7735
     help
       Indicates that an ST7735 display is present.
 
+config MODULE_ST7789
+    bool "ST7789 display driver"
+    select MODULE_ST7735
+
+config HAVE_ST7789
+    bool
+    select MODULE_ST7789 if MODULE_DISP_DEV
+    help
+      Indicates that an ST7789 display is present.
+
 menuconfig KCONFIG_USEMODULE_ST7735
     bool "Configure ST7735 driver"
     depends on USEMODULE_ST7735

drivers/st7735/Makefile.include

@@ -1,2 +1,4 @@
+PSEUDOMODULES += st7789
+
 USEMODULE_INCLUDES_st7735 := $(LAST_MAKEFILEDIR)/include
 USEMODULE_INCLUDES += $(USEMODULE_INCLUDES_st7735)

drivers/st7735/st7735.c

@@ -66,7 +66,12 @@ static uint8_t _st7735_calc_vml(int16_t vcoml)
 
 static int _init(lcd_t *dev, const lcd_params_t *params)
 {
-    assert(params->lines <= 162);
+    if (IS_USED(MODULE_ST7789)) {
+        assert(params->lines <= 320);
+    }
+    else {
+        assert(params->lines <= 162);
+    }
     dev->params = params;
     uint8_t command_params[4] = { 0 };