Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

gnrc_ipv6: Forward multicast packets addressed to self #5729

Closed

Conversation

miri64
Copy link
Member

@miri64 miri64 commented Aug 5, 2016

Adaptation of #4528

@miri64 miri64 added Type: bug The issue reports a bug / The PR fixes a bug (including spelling errors) Area: network Area: Networking GNRC labels Aug 5, 2016
@miri64 miri64 force-pushed the gnrc_ipv6/fix/forward-own-mcast branch from 96d4744 to bca831b Compare August 5, 2016 12:54
@miri64 miri64 added the CI: ready for build If set, CI server will compile all applications for all available boards for the labeled PR label Aug 5, 2016
@miri64
Copy link
Member Author

miri64 commented Aug 5, 2016

Murdock is happy :-)

@kYc0o
Copy link
Contributor

kYc0o commented Aug 5, 2016

Can I test it on monday? code was already ACKed so maybe it doesn't really need testing...

edit: code wasn't ACKed, I'll test on monday.

@miri64
Copy link
Member Author

miri64 commented Aug 5, 2016

Sure.

@miri64
Copy link
Member Author

miri64 commented Aug 5, 2016

I just tried to test it but it wasn't really working as I was expecting... But might be, that I just configured my Linux wrong :-/

@miri64
Copy link
Member Author

miri64 commented Aug 10, 2016

@kYc0o ping?

@kYc0o
Copy link
Contributor

kYc0o commented Aug 10, 2016

oups! sorry! I forgot this... I'm taking a look :) your tests succeeded?

@kYc0o
Copy link
Contributor

kYc0o commented Aug 11, 2016

Well I just tested in 2 samr21 and I have a panic.

First:

custom-1;ifconfig 7 add ff0e::1
1470930941.633923;custom-1;> ifconfig 7 add ff0e::1
1470930941.634350;custom-1;success: added ff0e::1/64 to interface 7

Then:

1470930968.251771;custom-2;> ping6 ff0e::1
1470930968.256324;custom-1;> 0x49ef
1470930968.264988;custom-1;*** RIOT kernel panic:
1470930968.265206;custom-1;FAILED ASSERTION.
1470930968.265376;custom-1;
1470930968.269420;custom-1; pid | name                 | state    Q | pri | stack ( used) | base       | current    
1470930968.273706;custom-1;   - | isr_stack            | -        - |   - |   512 (  148) | 0x20000000 | 0x200001b8
1470930968.281281;custom-1;   1 | idle                 | pending  Q |  15 |   256 (  128) | 0x2000041c | 0x2000049c 
1470930968.289528;custom-1;   2 | main                 | bl mutex _ |   7 |  1536 (  836) | 0x2000051c | 0x2000097c 
1470930968.297685;custom-1;   3 | pktdump              | bl rx    _ |   6 |  1536 (  248) | 0x2000317c | 0x20003684 
1470930968.306177;custom-1;   4 | 6lo                  | bl rx    _ |   3 |  1024 (  448) | 0x20003d44 | 0x2000401c 
1470930968.313585;custom-1;   5 | ipv6                 | running  Q |   4 |  1024 (  660) | 0x2000109c | 0x20001384 
1470930968.321605;custom-1;   6 | udp                  | bl rx    _ |   5 |  1024 (  280) | 0x2000454c | 0x20004834 
1470930968.333887;custom-1;   7 | at86rf2xx            | bl rx    _ |   3 |  1024 (  392) | 0x20000c00 | 0x20000efc 
1470930968.344932;custom-1;   8 | RPL                  | bl rx    _ |   5 |  1024 (  208) | 0x20003874 | 0x20003ba4 
1470930968.345168;custom-1;     | SUM                  |            |     |  8960 ( 3348)
1470930968.345344;custom-1;
1470930968.345502;custom-1;*** halted.
1470930968.345654;custom-1;
1470930969.251554;custom-2;ping timeout
1470930971.251300;custom-2;ping timeout
1470930973.252739;custom-2;ping timeout
1470930973.258598;custom-2;--- ff0e::1 ping statistics ---
1470930973.258820;custom-2;3 packets transmitted, 0 received, 100% packet loss

So the problem you already experienced is still there...

@kYc0o
Copy link
Contributor

kYc0o commented Aug 30, 2016

Did you have time to look into this one?

@miri64
Copy link
Member Author

miri64 commented Oct 18, 2016

Nope, will try to do this for the release.

@miri64 miri64 added this to the Release 2016.10 milestone Oct 18, 2016
@miri64 miri64 added the State: WIP State: The PR is still work-in-progress and its code is not in its final presentable form yet label Oct 18, 2016
@miri64
Copy link
Member Author

miri64 commented Oct 31, 2016

I doubt I will find time for this, but it's not a feature so not effected by feature freeze

@miri64 miri64 mentioned this pull request Nov 7, 2016
@miri64
Copy link
Member Author

miri64 commented Nov 9, 2016

I don't think I manage to work on this until tomorrow. So postponed.

@miri64 miri64 modified the milestones: Release 2017.01, Release 2016.10 Nov 9, 2016
miri64 added a commit that referenced this pull request Nov 11, 2016
RIOT-2016.10 - Release Notes
============================
RIOT is a real-time multi-threading operating system that supports a range of
devices that are typically found in the Internet of Things: 8-bit
microcontrollers, 16-bit microcontrollers and light-weight 32-bit processors.

RIOT is based on the following design principles: energy-efficiency, real-time
capabilities, small memory footprint, modularity, and uniform API access,
independent of the underlying hardware (this API offers partial POSIX
compliance).

RIOT is developed by an international open source community which is
independent of specific vendors (e.g. similarly to the Linux community) and is
licensed with a non-viral copyleft license (LGPLv2.1), which allows indirect
business models around the free open-source software platform provided by
RIOT.

About this release:
===================
This release provides a lot of new features as well as it  fixes several major
bugs. Among these new features are the new simplified network socket API
called sock, the GNRC specific CoAP implementation gcoap and several new
packages: TinyDTLS, the Aversive++ microcontroller library for robotics, the
u8g2 graphic library, and nanocoap.
Using the new sock API an implementation of the Simple Time Network Protocol
(SNTP) was also introduced, allowing for time synchronization between nodes.
New platforms include the Arduino Uno, the Arduino Duemilanove, the Arduino
Zero, SODAQ Autonomo, and the Zolertia remote (rev. B).
The most significant bug fix was done in native which led to a significantly
more robust handling of ISRs and now allows for at least 1,000 native
instances running stably on one machine.

About 263 pull requests with about 398 commits have been merged since the last
release and about 42 issues have been solved. 37 people contributed with code
in 100 days. 1006 files have been touched with 166500 insertions and 26926
deletions.

Notations used below:
=====================
+ means new feature/item
* means modified feature/item
- means removed feature/item

New features and changes
========================
General
-------
* Verbose behavior for assert() macro

Core
----
+ MPU support for Cortex-M

API changes
-----------
+ Socket-like sock API (replacing conn)
* netdev2: Add Testmodes and CCA modes
* IEEE 802.15.4: clean-up Intra-PAN behavior
* IEEE 802.15.4: centralize default values
* gnrc_pktbuf: allow for 0-sized snips
+ gnrc_netapi: mbox and arbitrary callback support

System libraries
----------------
No new features or changes

Networking
----------
+ Provide sock-port for GNRC
+ gcoap: a GNRC-based CoAP implementation
+ Simple Network Time Protocol (RFC 5905, section 14)
+ Priority Queue for packet snips
+ IPv4 header definitions

Packages
--------
+ nanocoap: CoAP header parser/builder
+ TinyDTLS: DTLS library
+ tiny-asn1: asn.1/der decoder
+ Aversive++ microcontroller programming library
+ u8g2 graphic library

Platforms
---------
+ Support for stm32f2xx MCU family
+ Low power modes for samd21 CPUs
+ More Arduino-based platforms:
    + Arduino Uno
    + Arduino Duemilanove
    + Arduino Zero
+ More boards of ST's Nucleo platforms:
    + ST Nucleo F030 board support
    + ST Nucleo F070 board support
    + ST Nucleo F446 board support
+ SODAQ Automono
+ Zolertia remote rev. B

Drivers
-------
+ W5100 Ethernet device
+ Atmel IO1 Xplained extension
+ LPD8808 LED strips
* at86rf2xx: provide capability to access the RND_VALUE random value register

Build System
------------
+ static-tests build target for easy local execution of CI's static tests

Other
-----
+ Provide Arduino API to Nucleo boards
+ Packer configuration file to build vagrant boxes
+ CC2650STK Debugger Support
+ ethos: add Ethos over TCP support

Fixed Issues from the last release
==================================
 #534:  native debugging on osx fails
 #2071: native: *long* overdue fixes
 #3341: netdev2_tap crashes when hammered
 #5007: gnrc icmpv6: Ping reply goes out the wrong interface
 #5432: native: valgrind fails

Known Issues
============
Networking related issues
-------------------------
 #3075: nhdp: unnecessary microsecond precision: NHDP works with timer values
       of microsecond precision which is not required. Changing to lower
       precision would save some memory.
 #4048: potential racey memory leak: According to the packet buffer stats,
       flood-pinging a multicast destination may lead to a memory leak due to
       a race condition. However, it seems to be a rare case and a completely
       filled up packet buffer was not observed.
 #4388: POSIX sockets: open socket is bound to a specific thread: This was an
       inherit problem of the conn API under GNRC. Since the POSIX sockets are
       still based on conn for this release, this issue persists
 #4527: gnrc_ipv6: Multicast is not forwarded if routing node listens to the
       address (might still be fixable for release, see #5729, #5230: gnrc
       ipv6: multicast packets are not dispatched to the upper layers)
 #5016: gnrc_rpl: Rejoining RPL instance as root after reboot messes up routing
 #5055: cpuid: multiple radios will get same EUI-64 Nodes with multiple
       interfaces might get the same EUI-64 for them since they are generated
       from the same CPU ID.
 #5656: Possible Weakness with locking in the GNRC network stack: For some
       operations mutexes to the network interfaces need to get unlocked in
       the current implementation to not get deadlocked. Recursive mutexes as
       provided in #5731 might help to solve this problem.
 #5748: gnrc: nodes crashing with too small packet buffer: A packet buffer of
       size ~512 B might lead to crashes. The issue describes this for several
       hundret nodes, but agressive flooding with just two nodes was also
       shown to lead to this problem.
 #5858: gnrc: 6lo: potential problem with reassembly of fragments: If one frame
       gets lost the reassembly state machine might get out of sync

 ### NDP is not working properly
 #4499: handle of l2src_len in gnrc_ndp_rtr_sol_handle: Reception of a router
       solicitation might lead to invalid zero-length link-layer addresses in
       neighbor cache.
 #5005: ndp: router advertisement sent with global address: Under some
       circumstances a router might send RAs with GUAs. While they are ignored
       on receive (as RFC 4861 specifies), RAs should have link-local
       addresses and not even be send out this way.
 #5122: NDP: global unicast address on non-6LBR nodes disappears after a while:
       Several issues (also see #5760) lead to a global unicast address
       effectively being banned from the network (disappears from neighbor
       cache, is not added again)
 #5467: ipv6 address vanishes when ARO (wrongly) indicates DUP caused by
       outdated ncache at router
 #5539: Border Router: packet not forwarded from ethos to interface 6
 #5790: ND: Lost of Global IPV6 on node after sending lot of UDP frame from BR

Timer related issues
--------------------
 #4841: xtimer: timer already in the list: Under some conditions an xtimer can
       end up twice in the internal list of the xtimer module
 #4902: xtimer: xtimer_set: xtimer_set does not handle integer overflows well
 #5338: xtimer: xtimer_now() not ISR safe for non-32-bit platforms.
 #5928: xtimer: usage in board_init() crashes: some boards use the xtimer in
       there board_init() function. The xtimer is however first initialized in
       the auto_init module which is executed after board_init()
 #6052: tests: xtimer_drift gets stuck: xtimer_drift application freezes after
       ~30-200 seconds

native related issues
---------------------
 #495:  native not float safe: When the FPU is used when an asynchronous context
       switch occurs, either the stack gets corrupted or a floating point
       exception occurs.
 #2175: ubjson: valgind registers "Invalid write of size 4" in unittests
 #4590: pkg: building relic with clang fails.
 #5796: native: tlsf: early malloc will lead to a crash: TLSF needs pools to be
       initialized (which is currently expected to be done in an application).
       If a malloc is needed before an application's main started (e.g. driver
       initialization) the node can crash, since no pool is allocated yet.

other platform related issues
-----------------------------
 #1891: newlib-nano: Printf formatting does not work properly for some numberic
       types: PRI[uxdi]64, PRI[uxdi]8 and float are not parsed in newlib-nano
 #2006: cpu/nrf51822: timer callback may be fired too early
 #2143: unittests: tests-core doesn't compile for all platforms: GCC build-ins
       were used in the unittests which are not available with msp430-gcc
 #2300: qemu unittest fails because of a page fault
 #4512: pkg: tests: RELIC unittests fail on iotlab-m3
 #4522: avsextrem: linker sometimes doesn't find `bl_init_clks()`
 #4560: make: clang is more pedantic than gcc oonf_api is not building with
       clang. (Partly solved by #4593)
 #4694: drivers/lm75a: does not build
 #4737: cortex-m: Hard fault after a thread exits (under some circumstances)
 #4822: kw2xrf: packet loss when packets get fragmented
 #4876: at86rf2xx: Simultaneous use of different transceiver types is not
       supported
 #4954: chronos: compiling with -O0 breaks
 #4866: not all GPIO driver implementations are thread safe: Due to non-atomic
       operations in the drivers some pin configurations might get lost.
 #5009: RIOT is saw-toothing in energy consumption (even when idling)
 #5103: xtimer: weird behavior of tests/xtimer_drift: xtimer_drift randomly
       jumps a few seconds on nrf52
 #5361: cpu/cc26x0: timer broken
 #5405: Eratic timings on iotlab-m3 with compression context activated
 #5460: cpu/samd21: i2c timing with compiler optimization
 #5486: at86rf2xx: lost interrupts
 #5489: cpu/lpc11u34: ADC broken
 #5603: atmega boards second UART issue
 #5678: at86rf2xx: failed assertion in _isr
 #5719: cc2538: rf driver doesn't handle large packets
 #5799: kw2x: 15.4 duplicate transmits
 #5944: msp430: ipv6_hdr unittests fail
 #5848: arduino: Race condition in sys/arduino/Makefile.include
 #5954: nRF52 uart_write get stuck
 #6018: nRF52 gnrc 6lowpan ble memory leak

other issues
------------
 #1263: TLSF implementation contains (a) read-before-write error(s).
 #3256: make: Setting constants on compile time doesn't really set them
       everywhere
 #3366: periph/i2c: handle NACK
 #4488: Making the newlib thread-safe: When calling puts/printf after
       thread_create(), the CPU hangs for DMA enabled uart drivers.
 #4866: periph: GPIO drivers are not thread safe
 #5128: make: buildtest breaks when exporting FEATURES_PROVIDED var
 #5207: make: buildest fails with board dependent application Makefiles
 #5390: pkg: OpenWSN does not compile: This package still uses deprecated
       modules and was not tested for a long time.
 #5520: tests/periph_uart not working
 #5561: C++11 extensions in header files
 #5776: make: Predefining CFLAGS are parsed weirdly
 #5863: OSX +  SAMR21-xpro: shell cannot handle command inputs larger than 64
       chars
 #5962: Makefile: UNDEF variable is not working as documented
 #6022: pkg: build order issue

Special Thanks
==============
We like to give our special thanks to all the companies that provided us with
their hardware for porting and testing, namely the people from (in
alphabeticalorder): Atmel, Freescale, Imagination Technologies, Limifrog,
Nordic, OpenMote, Phytec, SiLabs, UDOO,and Zolertia; and also companies that
directly sponsored development time: Cisco Systems, Eistec, Ell-i, Enigeering
Spirit, Nordic, FreshTemp LLC, OTAkeys and Phytec.

More information
================
http://www.riot-os.org

Mailing lists
-------------
* RIOT OS kernel developers list
  devel@riot-os.org (http://lists.riot-os.org/mailman/listinfo/devel)
* RIOT OS users list
  users@riot-os.org (http://lists.riot-os.org/mailman/listinfo/users)
* RIOT commits
  commits@riot-os.org (http://lists.riot-os.org/mailman/listinfo/commits)
* Github notifications
  notifications@riot-os.org (http://lists.riot-os.org/mailman/listinfo/notifications)

IRC
---
* Join the RIOT IRC channel at: irc.freenode.net, #riot-os

License
=======
* Most of the code developed by the RIOT community is licensed under the GNU
  Lesser General Public License (LGPL) version 2.1 as published by the Free
  Software Foundation.
* Some external sources are published under a separate, LGPL compatible
  license (e.g. some files developed by SICS).

All code files contain licensing information.
miri64 added a commit that referenced this pull request Nov 11, 2016
RIOT-2016.10 - Release Notes
============================
RIOT is a real-time multi-threading operating system that supports a range of
devices that are typically found in the Internet of Things: 8-bit
microcontrollers, 16-bit microcontrollers and light-weight 32-bit processors.

RIOT is based on the following design principles: energy-efficiency, real-time
capabilities, small memory footprint, modularity, and uniform API access,
independent of the underlying hardware (this API offers partial POSIX
compliance).

RIOT is developed by an international open source community which is
independent of specific vendors (e.g. similarly to the Linux community) and is
licensed with a non-viral copyleft license (LGPLv2.1), which allows indirect
business models around the free open-source software platform provided by
RIOT.

About this release:
===================
This release provides a lot of new features as well as it  fixes several major
bugs. Among these new features are the new simplified network socket API
called sock, the GNRC specific CoAP implementation gcoap and several new
packages: TinyDTLS, the Aversive++ microcontroller library for robotics, the
u8g2 graphic library, and nanocoap.
Using the new sock API an implementation of the Simple Time Network Protocol
(SNTP) was also introduced, allowing for time synchronization between nodes.
New platforms include the Arduino Uno, the Arduino Duemilanove, the Arduino
Zero, SODAQ Autonomo, and the Zolertia remote (rev. B).
The most significant bug fix was done in native which led to a significantly
more robust handling of ISRs and now allows for at least 1,000 native
instances running stably on one machine.

About 263 pull requests with about 398 commits have been merged since the last
release and about 42 issues have been solved. 37 people contributed with code
in 100 days. 1006 files have been touched with 166500 insertions and 26926
deletions.

Notations used below:
=====================
+ means new feature/item
* means modified feature/item
- means removed feature/item

New features and changes
========================
General
-------
* Verbose behavior for assert() macro

Core
----
+ MPU support for Cortex-M

API changes
-----------
+ Socket-like sock API (replacing conn)
* netdev2: Add Testmodes and CCA modes
* IEEE 802.15.4: clean-up Intra-PAN behavior
* IEEE 802.15.4: centralize default values
* gnrc_pktbuf: allow for 0-sized snips
+ gnrc_netapi: mbox and arbitrary callback support

System libraries
----------------
No new features or changes

Networking
----------
+ Provide sock-port for GNRC
+ gcoap: a GNRC-based CoAP implementation
+ Simple Network Time Protocol (RFC 5905, section 14)
+ Priority Queue for packet snips
+ IPv4 header definitions

Packages
--------
+ nanocoap: CoAP header parser/builder
+ TinyDTLS: DTLS library
+ tiny-asn1: asn.1/der decoder
+ Aversive++ microcontroller programming library
+ u8g2 graphic library

Platforms
---------
+ Support for stm32f2xx MCU family
+ Low power modes for samd21 CPUs
+ More Arduino-based platforms:
    + Arduino Uno
    + Arduino Duemilanove
    + Arduino Zero
+ More boards of ST's Nucleo platforms:
    + ST Nucleo F030 board support
    + ST Nucleo F070 board support
    + ST Nucleo F446 board support
+ SODAQ Automono
+ Zolertia remote rev. B

Drivers
-------
+ W5100 Ethernet device
+ Atmel IO1 Xplained extension
+ LPD8808 LED strips
* at86rf2xx: provide capability to access the RND_VALUE random value register

Build System
------------
+ static-tests build target for easy local execution of CI's static tests

Other
-----
+ Provide Arduino API to Nucleo boards
+ Packer configuration file to build vagrant boxes
+ CC2650STK Debugger Support
+ ethos: add Ethos over TCP support

Fixed Issues from the last release
==================================
 #534:  native debugging on osx fails
 #2071: native: *long* overdue fixes
 #3341: netdev2_tap crashes when hammered
 #5007: gnrc icmpv6: Ping reply goes out the wrong interface
 #5432: native: valgrind fails

Known Issues
============
Networking related issues
-------------------------
 #3075: nhdp: unnecessary microsecond precision: NHDP works with timer values
       of microsecond precision which is not required. Changing to lower
       precision would save some memory.
 #4048: potential racey memory leak: According to the packet buffer stats,
       flood-pinging a multicast destination may lead to a memory leak due to
       a race condition. However, it seems to be a rare case and a completely
       filled up packet buffer was not observed.
 #4388: POSIX sockets: open socket is bound to a specific thread: This was an
       inherit problem of the conn API under GNRC. Since the POSIX sockets are
       still based on conn for this release, this issue persists
 #4527: gnrc_ipv6: Multicast is not forwarded if routing node listens to the
       address (might still be fixable for release, see #5729, #5230: gnrc
       ipv6: multicast packets are not dispatched to the upper layers)
 #5016: gnrc_rpl: Rejoining RPL instance as root after reboot messes up routing
 #5055: cpuid: multiple radios will get same EUI-64 Nodes with multiple
       interfaces might get the same EUI-64 for them since they are generated
       from the same CPU ID.
 #5656: Possible Weakness with locking in the GNRC network stack: For some
       operations mutexes to the network interfaces need to get unlocked in
       the current implementation to not get deadlocked. Recursive mutexes as
       provided in #5731 might help to solve this problem.
 #5748: gnrc: nodes crashing with too small packet buffer: A packet buffer of
       size ~512 B might lead to crashes. The issue describes this for several
       hundret nodes, but agressive flooding with just two nodes was also
       shown to lead to this problem.
 #5858: gnrc: 6lo: potential problem with reassembly of fragments: If one frame
       gets lost the reassembly state machine might get out of sync

 ### NDP is not working properly
 #4499: handle of l2src_len in gnrc_ndp_rtr_sol_handle: Reception of a router
       solicitation might lead to invalid zero-length link-layer addresses in
       neighbor cache.
 #5005: ndp: router advertisement sent with global address: Under some
       circumstances a router might send RAs with GUAs. While they are ignored
       on receive (as RFC 4861 specifies), RAs should have link-local
       addresses and not even be send out this way.
 #5122: NDP: global unicast address on non-6LBR nodes disappears after a while:
       Several issues (also see #5760) lead to a global unicast address
       effectively being banned from the network (disappears from neighbor
       cache, is not added again)
 #5467: ipv6 address vanishes when ARO (wrongly) indicates DUP caused by
       outdated ncache at router
 #5539: Border Router: packet not forwarded from ethos to interface 6
 #5790: ND: Lost of Global IPV6 on node after sending lot of UDP frame from BR

Timer related issues
--------------------
 #4841: xtimer: timer already in the list: Under some conditions an xtimer can
       end up twice in the internal list of the xtimer module
 #4902: xtimer: xtimer_set: xtimer_set does not handle integer overflows well
 #5338: xtimer: xtimer_now() not ISR safe for non-32-bit platforms.
 #5928: xtimer: usage in board_init() crashes: some boards use the xtimer in
       there board_init() function. The xtimer is however first initialized in
       the auto_init module which is executed after board_init()
 #6052: tests: xtimer_drift gets stuck: xtimer_drift application freezes after
       ~30-200 seconds

native related issues
---------------------
 #495:  native not float safe: When the FPU is used when an asynchronous context
       switch occurs, either the stack gets corrupted or a floating point
       exception occurs.
 #2175: ubjson: valgind registers "Invalid write of size 4" in unittests
 #4590: pkg: building relic with clang fails.
 #5796: native: tlsf: early malloc will lead to a crash: TLSF needs pools to be
       initialized (which is currently expected to be done in an application).
       If a malloc is needed before an application's main started (e.g. driver
       initialization) the node can crash, since no pool is allocated yet.

other platform related issues
-----------------------------
 #1891: newlib-nano: Printf formatting does not work properly for some numberic
       types: PRI[uxdi]64, PRI[uxdi]8 and float are not parsed in newlib-nano
 #2006: cpu/nrf51822: timer callback may be fired too early
 #2143: unittests: tests-core doesn't compile for all platforms: GCC build-ins
       were used in the unittests which are not available with msp430-gcc
 #2300: qemu unittest fails because of a page fault
 #4512: pkg: tests: RELIC unittests fail on iotlab-m3
 #4522: avsextrem: linker sometimes doesn't find `bl_init_clks()`
 #4560: make: clang is more pedantic than gcc oonf_api is not building with
       clang. (Partly solved by #4593)
 #4694: drivers/lm75a: does not build
 #4737: cortex-m: Hard fault after a thread exits (under some circumstances)
 #4822: kw2xrf: packet loss when packets get fragmented
 #4876: at86rf2xx: Simultaneous use of different transceiver types is not
       supported
 #4954: chronos: compiling with -O0 breaks
 #4866: not all GPIO driver implementations are thread safe: Due to non-atomic
       operations in the drivers some pin configurations might get lost.
 #5009: RIOT is saw-toothing in energy consumption (even when idling)
 #5103: xtimer: weird behavior of tests/xtimer_drift: xtimer_drift randomly
       jumps a few seconds on nrf52
 #5361: cpu/cc26x0: timer broken
 #5405: Eratic timings on iotlab-m3 with compression context activated
 #5460: cpu/samd21: i2c timing with compiler optimization
 #5486: at86rf2xx: lost interrupts
 #5489: cpu/lpc11u34: ADC broken
 #5603: atmega boards second UART issue
 #5678: at86rf2xx: failed assertion in _isr
 #5719: cc2538: rf driver doesn't handle large packets
 #5799: kw2x: 15.4 duplicate transmits
 #5944: msp430: ipv6_hdr unittests fail
 #5848: arduino: Race condition in sys/arduino/Makefile.include
 #5954: nRF52 uart_write get stuck
 #6018: nRF52 gnrc 6lowpan ble memory leak

other issues
------------
 #1263: TLSF implementation contains (a) read-before-write error(s).
 #3256: make: Setting constants on compile time doesn't really set them
       everywhere
 #3366: periph/i2c: handle NACK
 #4488: Making the newlib thread-safe: When calling puts/printf after
       thread_create(), the CPU hangs for DMA enabled uart drivers.
 #4866: periph: GPIO drivers are not thread safe
 #5128: make: buildtest breaks when exporting FEATURES_PROVIDED var
 #5207: make: buildest fails with board dependent application Makefiles
 #5390: pkg: OpenWSN does not compile: This package still uses deprecated
       modules and was not tested for a long time.
 #5520: tests/periph_uart not working
 #5561: C++11 extensions in header files
 #5776: make: Predefining CFLAGS are parsed weirdly
 #5863: OSX +  SAMR21-xpro: shell cannot handle command inputs larger than 64
       chars
 #5962: Makefile: UNDEF variable is not working as documented
 #6022: pkg: build order issue

Special Thanks
==============
We like to give our special thanks to all the companies that provided us with
their hardware for porting and testing, namely the people from (in
alphabeticalorder): Atmel, Freescale, Imagination Technologies, Limifrog,
Nordic, OpenMote, Phytec, SiLabs, UDOO,and Zolertia; and also companies that
directly sponsored development time: Cisco Systems, Eistec, Ell-i, Enigeering
Spirit, Nordic, FreshTemp LLC, OTAkeys and Phytec.

More information
================
http://www.riot-os.org

Mailing lists
-------------
* RIOT OS kernel developers list
  devel@riot-os.org (http://lists.riot-os.org/mailman/listinfo/devel)
* RIOT OS users list
  users@riot-os.org (http://lists.riot-os.org/mailman/listinfo/users)
* RIOT commits
  commits@riot-os.org (http://lists.riot-os.org/mailman/listinfo/commits)
* Github notifications
  notifications@riot-os.org (http://lists.riot-os.org/mailman/listinfo/notifications)

IRC
---
* Join the RIOT IRC channel at: irc.freenode.net, #riot-os

License
=======
* Most of the code developed by the RIOT community is licensed under the GNU
  Lesser General Public License (LGPL) version 2.1 as published by the Free
  Software Foundation.
* Some external sources are published under a separate, LGPL compatible
  license (e.g. some files developed by SICS).

All code files contain licensing information.
@OlegHahm OlegHahm self-assigned this Dec 8, 2016
@kYc0o
Copy link
Contributor

kYc0o commented Jan 11, 2017

ping! ❄️

@miri64
Copy link
Member Author

miri64 commented Jan 11, 2017

Did not find any time to look into it :(

@miri64 miri64 modified the milestones: Release 2017.04, Release 2017.01 Jan 11, 2017
@OlegHahm
Copy link
Member

I will try to help - maybe at the hack'n'ACK.

neiljay pushed a commit to neiljay/RIOT that referenced this pull request Jan 16, 2017
RIOT-2016.10 - Release Notes
============================
RIOT is a real-time multi-threading operating system that supports a range of
devices that are typically found in the Internet of Things: 8-bit
microcontrollers, 16-bit microcontrollers and light-weight 32-bit processors.

RIOT is based on the following design principles: energy-efficiency, real-time
capabilities, small memory footprint, modularity, and uniform API access,
independent of the underlying hardware (this API offers partial POSIX
compliance).

RIOT is developed by an international open source community which is
independent of specific vendors (e.g. similarly to the Linux community) and is
licensed with a non-viral copyleft license (LGPLv2.1), which allows indirect
business models around the free open-source software platform provided by
RIOT.

About this release:
===================
This release provides a lot of new features as well as it  fixes several major
bugs. Among these new features are the new simplified network socket API
called sock, the GNRC specific CoAP implementation gcoap and several new
packages: TinyDTLS, the Aversive++ microcontroller library for robotics, the
u8g2 graphic library, and nanocoap.
Using the new sock API an implementation of the Simple Time Network Protocol
(SNTP) was also introduced, allowing for time synchronization between nodes.
New platforms include the Arduino Uno, the Arduino Duemilanove, the Arduino
Zero, SODAQ Autonomo, and the Zolertia remote (rev. B).
The most significant bug fix was done in native which led to a significantly
more robust handling of ISRs and now allows for at least 1,000 native
instances running stably on one machine.

About 263 pull requests with about 398 commits have been merged since the last
release and about 42 issues have been solved. 37 people contributed with code
in 100 days. 1006 files have been touched with 166500 insertions and 26926
deletions.

Notations used below:
=====================
+ means new feature/item
* means modified feature/item
- means removed feature/item

New features and changes
========================
General
-------
* Verbose behavior for assert() macro

Core
----
+ MPU support for Cortex-M

API changes
-----------
+ Socket-like sock API (replacing conn)
* netdev2: Add Testmodes and CCA modes
* IEEE 802.15.4: clean-up Intra-PAN behavior
* IEEE 802.15.4: centralize default values
* gnrc_pktbuf: allow for 0-sized snips
+ gnrc_netapi: mbox and arbitrary callback support

System libraries
----------------
No new features or changes

Networking
----------
+ Provide sock-port for GNRC
+ gcoap: a GNRC-based CoAP implementation
+ Simple Network Time Protocol (RFC 5905, section 14)
+ Priority Queue for packet snips
+ IPv4 header definitions

Packages
--------
+ nanocoap: CoAP header parser/builder
+ TinyDTLS: DTLS library
+ tiny-asn1: asn.1/der decoder
+ Aversive++ microcontroller programming library
+ u8g2 graphic library

Platforms
---------
+ Support for stm32f2xx MCU family
+ Low power modes for samd21 CPUs
+ More Arduino-based platforms:
    + Arduino Uno
    + Arduino Duemilanove
    + Arduino Zero
+ More boards of ST's Nucleo platforms:
    + ST Nucleo F030 board support
    + ST Nucleo F070 board support
    + ST Nucleo F446 board support
+ SODAQ Automono
+ Zolertia remote rev. B

Drivers
-------
+ W5100 Ethernet device
+ Atmel IO1 Xplained extension
+ LPD8808 LED strips
* at86rf2xx: provide capability to access the RND_VALUE random value register

Build System
------------
+ static-tests build target for easy local execution of CI's static tests

Other
-----
+ Provide Arduino API to Nucleo boards
+ Packer configuration file to build vagrant boxes
+ CC2650STK Debugger Support
+ ethos: add Ethos over TCP support

Fixed Issues from the last release
==================================
 RIOT-OS#534:  native debugging on osx fails
 RIOT-OS#2071: native: *long* overdue fixes
 RIOT-OS#3341: netdev2_tap crashes when hammered
 RIOT-OS#5007: gnrc icmpv6: Ping reply goes out the wrong interface
 RIOT-OS#5432: native: valgrind fails

Known Issues
============
Networking related issues
-------------------------
 RIOT-OS#3075: nhdp: unnecessary microsecond precision: NHDP works with timer values
       of microsecond precision which is not required. Changing to lower
       precision would save some memory.
 RIOT-OS#4048: potential racey memory leak: According to the packet buffer stats,
       flood-pinging a multicast destination may lead to a memory leak due to
       a race condition. However, it seems to be a rare case and a completely
       filled up packet buffer was not observed.
 RIOT-OS#4388: POSIX sockets: open socket is bound to a specific thread: This was an
       inherit problem of the conn API under GNRC. Since the POSIX sockets are
       still based on conn for this release, this issue persists
 RIOT-OS#4527: gnrc_ipv6: Multicast is not forwarded if routing node listens to the
       address (might still be fixable for release, see RIOT-OS#5729, RIOT-OS#5230: gnrc
       ipv6: multicast packets are not dispatched to the upper layers)
 RIOT-OS#5016: gnrc_rpl: Rejoining RPL instance as root after reboot messes up routing
 RIOT-OS#5055: cpuid: multiple radios will get same EUI-64 Nodes with multiple
       interfaces might get the same EUI-64 for them since they are generated
       from the same CPU ID.
 RIOT-OS#5656: Possible Weakness with locking in the GNRC network stack: For some
       operations mutexes to the network interfaces need to get unlocked in
       the current implementation to not get deadlocked. Recursive mutexes as
       provided in RIOT-OS#5731 might help to solve this problem.
 RIOT-OS#5748: gnrc: nodes crashing with too small packet buffer: A packet buffer of
       size ~512 B might lead to crashes. The issue describes this for several
       hundret nodes, but agressive flooding with just two nodes was also
       shown to lead to this problem.
 RIOT-OS#5858: gnrc: 6lo: potential problem with reassembly of fragments: If one frame
       gets lost the reassembly state machine might get out of sync

 ### NDP is not working properly
 RIOT-OS#4499: handle of l2src_len in gnrc_ndp_rtr_sol_handle: Reception of a router
       solicitation might lead to invalid zero-length link-layer addresses in
       neighbor cache.
 RIOT-OS#5005: ndp: router advertisement sent with global address: Under some
       circumstances a router might send RAs with GUAs. While they are ignored
       on receive (as RFC 4861 specifies), RAs should have link-local
       addresses and not even be send out this way.
 RIOT-OS#5122: NDP: global unicast address on non-6LBR nodes disappears after a while:
       Several issues (also see RIOT-OS#5760) lead to a global unicast address
       effectively being banned from the network (disappears from neighbor
       cache, is not added again)
 RIOT-OS#5467: ipv6 address vanishes when ARO (wrongly) indicates DUP caused by
       outdated ncache at router
 RIOT-OS#5539: Border Router: packet not forwarded from ethos to interface 6
 RIOT-OS#5790: ND: Lost of Global IPV6 on node after sending lot of UDP frame from BR

Timer related issues
--------------------
 RIOT-OS#4841: xtimer: timer already in the list: Under some conditions an xtimer can
       end up twice in the internal list of the xtimer module
 RIOT-OS#4902: xtimer: xtimer_set: xtimer_set does not handle integer overflows well
 RIOT-OS#5338: xtimer: xtimer_now() not ISR safe for non-32-bit platforms.
 RIOT-OS#5928: xtimer: usage in board_init() crashes: some boards use the xtimer in
       there board_init() function. The xtimer is however first initialized in
       the auto_init module which is executed after board_init()
 RIOT-OS#6052: tests: xtimer_drift gets stuck: xtimer_drift application freezes after
       ~30-200 seconds

native related issues
---------------------
 RIOT-OS#495:  native not float safe: When the FPU is used when an asynchronous context
       switch occurs, either the stack gets corrupted or a floating point
       exception occurs.
 RIOT-OS#2175: ubjson: valgind registers "Invalid write of size 4" in unittests
 RIOT-OS#4590: pkg: building relic with clang fails.
 RIOT-OS#5796: native: tlsf: early malloc will lead to a crash: TLSF needs pools to be
       initialized (which is currently expected to be done in an application).
       If a malloc is needed before an application's main started (e.g. driver
       initialization) the node can crash, since no pool is allocated yet.

other platform related issues
-----------------------------
 RIOT-OS#1891: newlib-nano: Printf formatting does not work properly for some numberic
       types: PRI[uxdi]64, PRI[uxdi]8 and float are not parsed in newlib-nano
 RIOT-OS#2006: cpu/nrf51822: timer callback may be fired too early
 RIOT-OS#2143: unittests: tests-core doesn't compile for all platforms: GCC build-ins
       were used in the unittests which are not available with msp430-gcc
 RIOT-OS#2300: qemu unittest fails because of a page fault
 RIOT-OS#4512: pkg: tests: RELIC unittests fail on iotlab-m3
 RIOT-OS#4522: avsextrem: linker sometimes doesn't find `bl_init_clks()`
 RIOT-OS#4560: make: clang is more pedantic than gcc oonf_api is not building with
       clang. (Partly solved by RIOT-OS#4593)
 RIOT-OS#4694: drivers/lm75a: does not build
 RIOT-OS#4737: cortex-m: Hard fault after a thread exits (under some circumstances)
 RIOT-OS#4822: kw2xrf: packet loss when packets get fragmented
 RIOT-OS#4876: at86rf2xx: Simultaneous use of different transceiver types is not
       supported
 RIOT-OS#4954: chronos: compiling with -O0 breaks
 RIOT-OS#4866: not all GPIO driver implementations are thread safe: Due to non-atomic
       operations in the drivers some pin configurations might get lost.
 RIOT-OS#5009: RIOT is saw-toothing in energy consumption (even when idling)
 RIOT-OS#5103: xtimer: weird behavior of tests/xtimer_drift: xtimer_drift randomly
       jumps a few seconds on nrf52
 RIOT-OS#5361: cpu/cc26x0: timer broken
 RIOT-OS#5405: Eratic timings on iotlab-m3 with compression context activated
 RIOT-OS#5460: cpu/samd21: i2c timing with compiler optimization
 RIOT-OS#5486: at86rf2xx: lost interrupts
 RIOT-OS#5489: cpu/lpc11u34: ADC broken
 RIOT-OS#5603: atmega boards second UART issue
 RIOT-OS#5678: at86rf2xx: failed assertion in _isr
 RIOT-OS#5719: cc2538: rf driver doesn't handle large packets
 RIOT-OS#5799: kw2x: 15.4 duplicate transmits
 RIOT-OS#5944: msp430: ipv6_hdr unittests fail
 RIOT-OS#5848: arduino: Race condition in sys/arduino/Makefile.include
 RIOT-OS#5954: nRF52 uart_write get stuck
 RIOT-OS#6018: nRF52 gnrc 6lowpan ble memory leak

other issues
------------
 RIOT-OS#1263: TLSF implementation contains (a) read-before-write error(s).
 RIOT-OS#3256: make: Setting constants on compile time doesn't really set them
       everywhere
 RIOT-OS#3366: periph/i2c: handle NACK
 RIOT-OS#4488: Making the newlib thread-safe: When calling puts/printf after
       thread_create(), the CPU hangs for DMA enabled uart drivers.
 RIOT-OS#4866: periph: GPIO drivers are not thread safe
 RIOT-OS#5128: make: buildtest breaks when exporting FEATURES_PROVIDED var
 RIOT-OS#5207: make: buildest fails with board dependent application Makefiles
 RIOT-OS#5390: pkg: OpenWSN does not compile: This package still uses deprecated
       modules and was not tested for a long time.
 RIOT-OS#5520: tests/periph_uart not working
 RIOT-OS#5561: C++11 extensions in header files
 RIOT-OS#5776: make: Predefining CFLAGS are parsed weirdly
 RIOT-OS#5863: OSX +  SAMR21-xpro: shell cannot handle command inputs larger than 64
       chars
 RIOT-OS#5962: Makefile: UNDEF variable is not working as documented
 RIOT-OS#6022: pkg: build order issue

Special Thanks
==============
We like to give our special thanks to all the companies that provided us with
their hardware for porting and testing, namely the people from (in
alphabeticalorder): Atmel, Freescale, Imagination Technologies, Limifrog,
Nordic, OpenMote, Phytec, SiLabs, UDOO,and Zolertia; and also companies that
directly sponsored development time: Cisco Systems, Eistec, Ell-i, Enigeering
Spirit, Nordic, FreshTemp LLC, OTAkeys and Phytec.

More information
================
http://www.riot-os.org

Mailing lists
-------------
* RIOT OS kernel developers list
  devel@riot-os.org (http://lists.riot-os.org/mailman/listinfo/devel)
* RIOT OS users list
  users@riot-os.org (http://lists.riot-os.org/mailman/listinfo/users)
* RIOT commits
  commits@riot-os.org (http://lists.riot-os.org/mailman/listinfo/commits)
* Github notifications
  notifications@riot-os.org (http://lists.riot-os.org/mailman/listinfo/notifications)

IRC
---
* Join the RIOT IRC channel at: irc.freenode.net, #riot-os

License
=======
* Most of the code developed by the RIOT community is licensed under the GNU
  Lesser General Public License (LGPL) version 2.1 as published by the Free
  Software Foundation.
* Some external sources are published under a separate, LGPL compatible
  license (e.g. some files developed by SICS).

All code files contain licensing information.
@kYc0o
Copy link
Contributor

kYc0o commented Mar 15, 2017

This is not affected by #6627?

@miri64
Copy link
Member Author

miri64 commented Mar 15, 2017

I don't see why.

@kYc0o
Copy link
Contributor

kYc0o commented Mar 15, 2017

I got just the impression that grc_mac will forward the packets if they're marked multicast, but I have no knowledge if a packet can be only marked multicast on upper layers.

@miri64
Copy link
Member Author

miri64 commented Mar 15, 2017

I got just the impression that grc_mac will forward the packets if they're marked multicast, but I have no knowledge if a packet can be only marked multicast on upper layers.

Yes, there is no broadcast in IPv6, so packets will be marked as multicast. gnrc_mac isn't used at the moment, so the relation of this PR and #6627 is minimal. The flag is for the link-layer set a multicast address based on the network layer. (E.g. in Ethernet multicast addresses for IPv4 and IPv6 are different and the broadcast address is another one, too. On the other hand, IEEE 802.15.4 has no concept for multicast and just broadcasts).

@kYc0o
Copy link
Contributor

kYc0o commented Mar 15, 2017

OK, got it, thanks for the explanation 😄

@kaspar030
Copy link
Contributor

@miri64 is there a chance of fixing this for .04?

@miri64
Copy link
Member Author

miri64 commented Apr 21, 2017

Mh, I've only adapted this PR and tbh forgot what this fix was about. The code looks like, if I'm not mistaking, it is supposed to demux all non-link-local multicast packets, which seems a little bit off to me.

@kaspar030
Copy link
Contributor

Ok, then I'll postpone.

@kYc0o
Copy link
Contributor

kYc0o commented Jun 30, 2017

@miri64 is there a chance of fixing this for .04?

Can we ask the same for .07?

@miri64
Copy link
Member Author

miri64 commented Jun 30, 2017

Did not put any work into this => still the same situation.

@miri64
Copy link
Member Author

miri64 commented Nov 6, 2017

I plan to clean-up GNRC's IPv6 majorly as soon #7925 is merged and will include this with that. So closing this as memo.

@miri64 miri64 closed this Nov 6, 2017
@miri64 miri64 added the State: archived State: The PR has been archived for possible future re-adaptation label Nov 6, 2017
@miri64 miri64 deleted the gnrc_ipv6/fix/forward-own-mcast branch November 6, 2017 13:56
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Area: network Area: Networking CI: ready for build If set, CI server will compile all applications for all available boards for the labeled PR State: archived State: The PR has been archived for possible future re-adaptation State: WIP State: The PR is still work-in-progress and its code is not in its final presentable form yet Type: bug The issue reports a bug / The PR fixes a bug (including spelling errors)
Projects
None yet
Development

Successfully merging this pull request may close these issues.

5 participants