Notice

This repository is based on QiuSimons/YAOF.

All source code in this repository uses GNU GPLv3 license.
If this repository violates your legal rights, please contact me.

This repository is for general informational purposes only. All content in the repository is provided in good faith. However, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of the repository.

---

Key Infomations

Login IP：192.168.1.1

Password：None

Version Informations

OpenWrt official v23.05.3

---

Feature

1.Based on official OpenWrt

2.Only contain the most basic software for the stability

3.Fullcone NAT supported

4.Opkg vermagic matched with OpenWrt manifest ( You can install the software as if you have AppStore~ )

5.Add package dae, a high performance eBPF transparent proxy client

6.Backport Google BBRv3 TCP congestion control

7.Backport LRNG ( Linux Random Number Generator )

8.Update to firewall4, firewall3 no longer supported ( Huge improvements in performance )

9.Add support for phone USB hotspot sharing, both for Android and iPhone

10.Disable IPv6 by default

• If you do need IPv6

uci set dhcp.lan.ra='hybrid'
uci set dhcp.lan.ndp='hybrid'
uci set dhcp.lan.dhcpv6='hybrid'
uci set dhcp.lan.ra_management='1'
uci set dhcp.@dnsmasq[0].rebind_protection='0'
uci set dhcp.@dnsmasq[0].filter_aaaa=0
uci commit dhcp

• PS: HYBRID mode is never a good choice, please learn about IPv6. Also odhcpd on OpenWrt has serious bugs!
• Bug fixed:
  • Add dhcp.lan.max_preferred_lifetime and dhcp.lan.max_valid_lifetime with LuCI options
  • Add scripts to fix lan IPv6 misbehaving when wan is getting IPv6-PD via PPPoE

X86_64 Feature

1.Support more NICs by default:

Intel: e1000, e1000e, ixgbe, igb, igc, i40e
Broadcom: tg3
Realtek: r8125, r8169, r8152

2.Modify kmod-igc ( Intel Foxville i225 / i226 ) rx / tx ring buffer to 4096 to prevent the NIC from suddenly stop working

R2S Feature

1.Fix DDR4 333MHz problem

2.Modify DTSI to support overclocked unstable devices as much as possible

3.Remove frequencies below 800MHz (same voltage) for faster response

4.Support TF card with a minimum size of 512MB

R4S Feature

1.Overclock to 2208MHz/1800MHz (big.LITTLE)

2.Remove thermal throttle limit (Default at 70°C)

3.Support TF card in 1.8V signalling, fix UHS card cannot boot in 3.3V mode

---

Thanks to everyone in ImmortalWrt and OpenWrt

• Especially Thanks
  • QiuSimons
  • ImmortalWrt
  • CN_SZTL
  • quintus-lab
  • AmadeusGhost
  • RikudouPatrickstar
  • KaneGreen
  • msylgj
  • coolsnowwolf